skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Drag Coefficient Characterization of the Origami Magic Ball
The drag coefficient plays a vital role in the design and optimization of robots that move through fluids. From aircraft to underwater vehicles, their geometries are specially engineered so that the drag coefficients are as low as possible to achieve energy-efficient performances. Origami magic balls are 3-dimensional reconfigurable geometries composed of repeated simple water-bomb units. Their volumes can change as their geometries vary and we have used this concept in a recent underwater robot design. This paper characterizes the drag coefficient of an origami magic ball in a wind tunnel. Through dimensional analysis, the scenario where the robot swims underwater is equivalently transferred to the situation when it is in the wind tunnel. With experiments, we have collected and analyzed the drag force data. It is concluded that the drag coefficient of the magic ball increases from around 0.64 to 1.26 as it transforms from a slim ellipsoidal shape to an oblate spherical shape. Additionally, three different magic balls produce increases in the drag coefficient of between 57% and 86% on average compared to the smooth geometries of the same size and aspect ratio. The results will be useful in future designs of robots using waterbomb origami in fluidic environments.  more » « less
Award ID(s):
2121887
PAR ID:
10469940
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
American Society of Mechanical Engineers
Date Published:
ISBN:
978-0-7918-8736-3
Format(s):
Medium: X
Location:
Boston, Massachusetts, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Engineering structures)
    null (Ed.)
    Cables of suspension, cable-stayed and tied-arch bridges, suspended roofs, and power transmission lines are prone to moderate to large-amplitude vibrations in wind because of their low inherent damping. Structural or fatigue failure of a cable, due to these vibrations, pose a significant threat to the safety and serviceability of these structures. Over the past few decades, many studies have investigated the mechanisms that cause different types of flow-induced vibrations in cables such as rain-wind induced vibration (RWIV), vortex-induced vibration (VIV), iced cable galloping, wake galloping, and dry-cable galloping that have resulted in an improved understanding of the cause of these vibrations. In this study, the parameters governing the turbulence-induced (buffeting) and motion-induced wind loads (self-excited) for inclined and yawed dry cables have been identified. These parameters facilitate the prediction of their response in turbulent wind and estimate the incipient condition for onset of dry-cable galloping. Wind tunnel experiments were performed to measure the parameters governing the aerodynamic and aeroelastic forces on a yawed dry cable. This study mainly focuses on the prediction of critical reduced velocity 〖(RV〗_cr) as a function of equivalent yaw angle (*) and Scruton number (Sc) through measurement of aerodynamic- damping and stiffness. Wind tunnel tests using a section model of a smooth cable were performed under uniform and smooth/gusty flow conditions in the AABL Wind and Gust Tunnel located at Iowa State University. Static model tests for equivalent yaw angles of 0º to 45º indicate that the mean drag coefficient 〖(C〗_D) and Strouhal number (St) of a yawed cable decreases with the yaw angle, while the mean lift coefficient 〖(C〗_L) remains zero in the subcritical Reynolds number (Re) regime. Dynamic one degree-of-freedom model tests in across-wind and along-wind directions resulted in the identification of buffeting indicial derivative functions and flutter derivatives of a yawed cable for a range of equivalent yaw angles. Empirical equations for mean drag coefficient, Strouhal number, buffeting indicial derivative functions and critical reduced velocity for dry-cable galloping are proposed for yawed cables. The results indicate a critical equivalent yaw angle of 45° for dry-cable galloping. A simplified design procedure is introduced to estimate the minimum damping required to arrest dry-cable galloping from occurring below the design wind speed of the cable structure. Furthermore, the results from this study can be applied to predict the wind load and response of a dry cable at a specified wind speed for a given yaw angle. 
    more » « less
  2. ; ; ; ; ; ; (, 2020 IEEE International Conference on Robotics and Automation (ICRA))
    Soft robots are theoretically well-suited to rescue and exploration applications where their flexibility allows for the traversal of highly cluttered environments. However, most existing mobile soft robots are not fast or powerful enough to effectively traverse three dimensional environments. In this paper, we introduce a new mobile robot with a continuously deformable slender body structure, the SalamanderBot, which combines the flexibility and maneuverability of soft robots, with the speed and power of traditional mobile robots. It consists of a cable-driven bellows-like origami module based on the Yoshimura crease pattern mounted between sets of powered wheels. The origami structure allows the body to deform as necessary to adapt to complex environments and terrains, while the wheels allow the robot to reach speeds of up to 303.1 mm/s (2.05 body-length/s). Salamanderbot can climb up to 60-degree slopes and perform sharp turns with a minimum turning radius of 79.9 mm (0.54 body-length). 
    more » « less
  3. ; (, Journal of Mechanisms and Robotics)
    Abstract The stiffness of robot legs greatly affects legged locomotion performance; tuning that stiffness, however, can be a costly and complex task. In this paper, we directly tune the stiffness of jumping robot legs using an origami-inspired laminate design and fabrication method. In addition to the stiffness coefficient described by Hooke’s law, the nonlinearity of the force-displacement curve can also be tuned by optimizing the geometry of the mechanism. Our method reduces the number of parts needed to realize legs with different stiffness while simplifying manual redesign effort, lowering the cost of legged robots while speeding up the design and optimization process. We have fabricated and tested the leg across six different stiffness profiles that vary both the nonlinearity and coefficient. Through a vertical jumping experiment actuated by a DC motor, we also show that proper tuning of the leg stiffness can result in an 18% improvement in lift-off speed and an increase of 19% in peak power output. 
    more » « less
  4. ; ; ; ; (, In Advanced Wind Tunnel Boundary Simulation II)
    This study presents the first 3D two-way coupled fluid structure interaction (FSI) simulation of a hybrid anechoic wind tunnel (HAWT) test section with modeling all important effects, such as turbulence, Kevlar wall porosity and deflection, and reveals for the first time the complete 3D flow structure associated with a lifting model placed into a HAWT. The Kevlar deflections are captured using finite element analysis (FEA) with shell elements operated under a membrane condition. Three-dimensional RANS CFD simulations are used to resolve the flow field. Aerodynamic experimental results are available and are compared against the FSI results. Quantitatively, the pressure coefficients on the airfoil are in good agreement with experimental results. The lift coefficient was slightly underpredicted while the drag was overpredicted by the CFD simulations. The flow structure downstream of the airfoil showed good agreement with the experiments, particularly over the wind tunnel walls where the Kevlar windows interact with the flow field. A discrepancy between previous experimental observations and juncture flow-induced vortices at the ends of the airfoil is found to stem from the limited ability of turbulence models. The qualitative behavior of the flow, including airfoil pressures and cross-sectional flow structure is well captured in the CFD. From the structural side, the behavior of the Kevlar windows and the flow developing over them is closely related to the aerodynamic pressure field induced by the airfoil. The Kevlar displacement and the transpiration velocity across the material is dominated by flow blockage effects, generated aerodynamic lift, and the wake of the airfoil. The airfoil wake increases the Kevlar window displacement, which was previously not resolved by two-dimensional panel-method simulations. The static pressure distribution over the Kevlar windows is symmetrical about the tunnel mid-height, confirming a dominantly two-dimensional flow field. 
    more » « less
  5. ; ; ; ; (, AIAA SCITECH 2022 Forum)
    Agility, robustness, endurance, and sustainability are the main challenges of the current distributed systems for ocean objects identification. Nowadays, developing a novel marine observation network to help identify threats and to provide both an early warning and data for forecasting models is a priority of marine missions. Autonomous systems, such as underwater robots and drones, can provide worthwhile information from the ocean environment; still, they have challenges associated with endurance, performance, and recovery. Skimming drones cannot be used to perform underwater missions, need a significant amount of energy to take off, and have stability problems due to the constant ocean wave motion. As for underwater swimming robots, they are generally slow and use a significant amount of energy. To this end, there is a need to design some novel bioinspired amphibious concepts that can overcome these challenges. In this paper, a network of distributed hybrid-amphibious robots with energy harvesting capabilities will be presented. This is accomplished through novel robot systems. The Lizard-Spider Octopus-Jellyfish-Rolling Robot (LSOJRR) is one of these novel ideas, which imitates the characteristics of a Golden wheel spider with rolling, jumping, and folding capabilities over the water, a Green Basilisk lizard with running capability over the water, and an octopus with unique underwater propulsion mechanism. The LSOJRR also has applications beyond Earth, and alternative designs of this robot are explored, particularly those involving the dispersal of swarms of smaller robots that also derive their design from biology. All of the designs presented in this paper draw inspiration from nature, and strive to achieve the goal of furthering the development for marine exploration. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email