Inkjet printing (IJP) is an additive manufacturing process capable to produce intricate functional structures. The IJP process performance and the quality of the printed parts are considerably affected by the deposited droplets’ volume. Obtaining consistent droplets volume during the process is difficult to achieve because the droplets are prone to variations due to various material properties, process parameters, and environmental conditions. Experimental (i.e., IJP setup observations) and computational (i.e., computational fluid dynamics (CFD)) analysis are used to study the droplets variability; however, they are expensive and computationally inefficient, respectively. The objective of this paper is to propose a framework that can perform fast and accurate droplet volume predictions for unseen IJP driving voltage regimes. A two-step approach is adopted: (1) an emulator is constructed from the physics-based droplet volume simulations to overcome the computational complexity and (2) the emulator is calibrated by incorporating the experimental IJP observations. In particular, a scaled Gaussian stochastic process (s-GaSP) is deployed for the emulation and calibration. The resulting surrogate model is able to rapidly and accurately predict the IJP droplets volume. The proposed methodology is demonstrated by calibrating the simulated data (i.e., CFD droplet simulations) emulator with experimental data from two distinct materials, namely glycerol and isopropyl alcohol.
Inkjet printing (IJP) is one of the promising additive manufacturing techniques that yield many innovations in electronic and biomedical products. In IJP, the products are fabricated by depositing droplets on substrates, and the quality of the products is highly affected by the droplet pinch-off behaviors. Therefore, identifying pinch-off behaviors of droplets is critical. However, annotating the pinch-off behaviors is burdensome since a large amount of images of pinch-off behaviors can be collected. Active learning (AL) is a machine learning technique which extracts human knowledge by iteratively acquiring human annotation and updating the classification model for the pinch-off behaviors identification. Consequently, a good classification performance can be achieved with limited labels. However, during the query process, the most informative instances (i.e., images) are varying and most query strategies in AL cannot handle these dynamics since they are handcrafted. Thus, this paper proposes a multiclass reinforced active learning (MCRAL) framework in which a query strategy is trained by reinforcement learning (RL). We designed a unique intrinsic reward signal to improve the classification model performance. Moreover, how to extract the features from images for pinch-off behavior identification is not trivial. Thus, we used a graph convolutional network for droplet image feature extraction. The results show that MCRAL excels AL and can reduce human efforts in pinch-off behavior identification. We further demonstrated that, by linking the process parameters to the predicted droplet pinch-off behaviors, the droplet pinch-off behavior can be adjusted based on MCRAL.
more » « less- NSF-PAR ID:
- 10471393
- Publisher / Repository:
- ASME
- Date Published:
- Journal Name:
- Journal of Manufacturing Science and Engineering
- Volume:
- 145
- Issue:
- 7
- ISSN:
- 1087-1357
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
null (Ed.)more » « less
Abstract Inkjet 3D printing has broad applications in areas such as health and energy due to its capability to precisely deposit micro-droplets of multi-functional materials. However, the droplet of the inkjet printing has different jetting behaviors including drop initiation, thinning, necking, pinching and flying, and they are vulnerable to disturbance from vibration, material inhomogeneity, etc. Such issues make it challenging to yield a consistent printing process and a defect-free final product with desired properties. Therefore, timely recognition of the droplet behavior is critical for inkjet printing quality assessment. In-situ video monitoring of the printing process paves a way for such recognition. In this paper, a novel feature identification framework is presented to recognize the spatiotemporal feature of in-situ monitoring videos for inkjet printing. Specifically, a spatiotemporal fusion network is used for droplet printing behavior classification. The categories are based on inkjet printability, which is related to both the static features (ligament, satellite, and meniscus) and dynamic features (ligament thinning, droplet pinch off, meniscus oscillation). For the recorded droplet jetting video data, two streams of networks, the frames sampled from video in spatial domain (associated with static features) and the optical flow in temporal domain (associated with dynamic features), are fused in different ways to recognize the droplet evolving behavior. Experiments results show that the proposed fusion network can recognize the droplet jetting behavior in the complex printing process and identify its printability with learned knowledge, which can ultimately enable the real-time inkjet printing quality control and further provide guidance to design optimal parameter settings for the inkjet printing process.
-
Hybrid rocket motors with paraffin-based fuels are of interest due to higher regression rates compared to other polymers. During paraffin combustion, a liquid layer forms on the fuel surface that, together with shearing forces from the oxidizer flow, results in the formation of instabilities at the fuel-oxidizer interface. These instabilities lead to the formation and entrainment of heterogeneous sized liquid droplets into the main flow and the combusting droplets result in higher motor output. The atomization process begins with droplet formation and ends with droplet pinch-off. The goal of this paper is to conduct an uncertainty quantification (UQ) analysis of the pinch-off process characterized by a pinch-off volume ($V_{po}$) and time ($t_{po}$). We study these quantities of interest (QoIs) in the context of a slab burner setup. We have developed a computationally expensive mathematical model that describes droplet formation under external forcing and trained an inexpensive Gaussian Process surrogate of the model to facilitate UQ. We use the pinch-off surrogate to forward propagate uncertainty of the model inputs to the QoIs and conduct two studies: one with gravity present and one without gravity effects. After forward-propagating the uncertainty of the inputs using the surrogate, we concluded that both QoIs have right-skewed distributions, corresponding to larger probability densities towards smaller pinch-off volumes and times. Specifically, for the pinch-off times, the resulting distributions reflect the effect of gravity acting against droplet formation, resulting in longer pinch-off times compared to the case where there is no gravity.more » « less
-
Brehm, Christop ; Pandya, Shishir (Ed.)Paraffin wax is a prominent solid fuel for hybrid rockets. The atomization process of the paraffin wax fuel into he hybrid rocket combustion involves the droplets pinching off from the fuel surface. Therefore, droplet formation and pinch-off dynam- ics is analyzed using a one-dimensional axisymmetric approximation to understand droplet size distribution and pinch-off time. A mixed finite element formulation is used to solve the numerical problem. The computational algorithm uses adaptive mesh refinement to capture singularity and runs self-consistently to calculate droplet elongation. The code is verified using the Method of Manufactured Solution (MMS) and validated against laboratory experiments. Moreover, paraffin wax simulations are explored for varying inlet radius and it is found that the droplet size increases very slightly with the increasing inlet radius. Also, the pinch-off time increases up to a point where it starts to decrease as we increase the inlet radius. This behavior leads to a conjecture for the theoretical maximum radius that the droplet approaches as the inlet radius increases, which is a motivation for the future work.more » « less
-
Orb weavers produce webs that trap prey using a capture spiral formed of regularly spaced glue droplets supported by protein fibers. Each droplet consists of an outer aqueous layer and an adhesive, viscoelastic glycoprotein core. Organic and inorganic compounds in the aqueous layer make droplets hygroscopic and cause droplet features to change with environmental humidity. When droplets contact a surface, they adhere and extend as an insect struggles. Thus, a droplet’s extensibility is as important for prey capture as its adhesion. Cursory observations show that droplets can adhere, extend, and pull off from a surface several times, a process called cycling. Our study cycled individual droplets of four species—Argiope aurantia, Neoscona crucifera, Verrucosa arenata, and Larinioides cornutus. Droplets were subjected to 40 cycles at two humidities to determine how humidity affected droplet performance. We hypothesized that droplets would continue to perform, but that performance would decrease. Droplet performance was characterized by filament length and force on droplets at pull-off, aqueous volume, and glycoprotein volume. As hypothesized, cycling decreased performance, notably extensibility and aqueous volume. However, humidity did not impact the response to cycling. In a natural context, droplets are not subjected to extensive cycling, but reusability is advantageous for orb-weaving spiders. Moreover, the ability to cycle, combined with their environmental responsiveness, allows us to characterize orb weaver droplets as smart materials for the first time.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4057002
