An official website of the United States government
The stability of a rigid particle in yield stress fluids, comprised of soft particle glasses (SPGs), is investigated in shear flow under an applied external force, such as weight, using particle dynamics simulations. Results provide the critical force threshold, in terms of the dynamic yield stress and the flow strength, required to initiate sedimentation of the rigid particle over a wide range of shear rates and volume fractions. The streamlines of the SPGs show local disturbances when the rigid particle settles. The form of these disturbances is consistent with the microdynamics and microstructure response of the neighboring soft particles of the sedimenting rigid particle. Sedimenting particle induces non-affine displacement to the suspensions at low shear rates and high applied forces, while these dynamical events are localized and suppressed at high shear rates. Stability diagrams, which provide the conditions of the sedimentation of the rigid particle, are presented in terms of the applied force and the shear rate. These individual stability diagrams at each volume fraction map onto a universal stability diagram when the external force is scaled by the dynamic yield stress and shear rate with a ratio of the solvent viscosity to the low-frequency modulus of the SPGs.
more »
« less
Stress–stress correlations reveal force chains in gels
We investigate the spatial correlations of microscopic stresses in soft particulate gels using 2D and 3D numerical simulations. We use a recently developed theoretical framework predicting the analytical form of stress–stress correlations in amorphous assemblies of athermal grains that acquire rigidity under an external load. These correlations exhibit a pinch-point singularity in Fourier space. This leads to long-range correlations and strong anisotropy in real space, which are at the origin of force-chains in granular solids. Our analysis of the model particulate gels at low particle volume fractions demonstrates that stress–stress correlations in these soft materials have characteristics very similar to those in granular solids and can be used to identify force chains. We show that the stress–stress correlations can distinguish floppy from rigid gel networks and that the intensity patterns reflect changes in shear moduli and network topology, due to the emergence of rigid structures during solidification.
more »
« less
- PAR ID:
- 10471991
- Publisher / Repository:
- AIP Publishing
- Date Published:
- Journal Name:
- The Journal of Chemical Physics
- Volume:
- 158
- Issue:
- 11
- ISSN:
- 0021-9606
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract This study investigates computationally the impact of particle size disparity and cohesion on force chain formation in granular media. The granular media considered in this study are bi-disperse systems under uniaxial compression, consisting of spherical, frictionless particles that interact through a modified Hookean model. Force chains in granular media are characterized as networks of particles that meet specific criteria for particle stress and inter-particle forces. The computational setup decouples the effects of particle packing on force chain formations, ensuring an independent assessment of particle size distribution and cohesion on force chain formation. The decoupling is achieved by characterizing particle packing through the radial density function, which enables the identification of systems with both regular and irregular packing. The fraction of particles in the force chains network is used to quantify the presence of the force chains. The findings show that particle size disparity promotes force chain formation in granular media with nearly-regular packing (i.e., an almost-ordered system). However, as particle size disparities grow, it promotes irregular packing (i.e., a disordered systems), leading to fewer force chains carrying larger loads than in ordered systems. Further, it is observed that the increased cohesion in granular systems leads to fewer force chains irrespective of particle size or packing.more » « less
-
Soft particulate gels can reversibly yield when sufficient deformation is applied, and the characteristics of this transition can be enhanced or limited by designing hybrid hydrogel composites. While the microscopic dynamics and macroscopic rheology of these systems have been studied separately in detail, the development of direct connections between the two has been difficult, particularly with regard to the nonlinear rheology. To bridge this gap, we perform a series of large amplitude oscillatory shear (LAOS) numerical measurements on model soft particulate gels at different volume fractions using coarse-grained molecular dynamics simulations. We first study a particulate network with local bending stiffness and then we combine it with a second component that can provide additional cross-linking to obtain two-component networks. Through the sequence of physical processes (SPP) framework, we define time-resolved dynamic moduli, and by tracking the changes in these moduli through the period, we can distinguish transitions in the material behavior as a function of time. This approach helps us establish the microscopic origin of the nonlinear rheology by connecting the changes in dynamic moduli to the corresponding microstructural changes during the deformation including the nonaffine displacement of particles, and the breakage, formation, and orientation of bonds.more » « less
-
Aguirre, M.A.; Luding, S.; Pugnaloni, L.A.; Soto, R. (Ed.)We have developed and employed a 3D particle stress tensor and contact force inference technique that employs synchrotron X-ray tomography and diffraction with an optimization algorithm. We have used this technique to study stress and force heterogeneity, particle fracture mechanics, contact-level energy dissipation, and the origin of wave phenomena in 3D granular media for the past five years. Here, we review the technique, describe experimental and numerical sources of uncertainty, and use experimental data and discrete element method simulations to study the method’s accuracy. We find that inferred forces in the strong force network of a 3D granular material are accurately determined even in the presence of noisy stress measurements.more » « less
-
Gels made from soft microscale particles smoothly transition between the fluid and solid states, making them an ideal medium in which to create macroscopic structures with microscopic precision. While tracing out spatial paths with an injection tip, the granular gel fluidizes at the point of injection and then rapidly solidifies, trapping injected material in place. This physical approach to creating three-dimensional (3D) structures negates the effects of surface tension, gravity, and particle diffusion, allowing a limitless breadth of materials to be written. With this method, we used silicones, hydrogels, colloids, and living cells to create complex large aspect ratio 3D objects, thin closed shells, and hierarchically branched tubular networks. We crosslinked polymeric materials and removed them from the granular gel, whereas uncrosslinked particulate systems were left supported within the medium for long times. This approach can be immediately used in diverse areas, contributing to tissue engineering, flexible electronics, particle engineering, smart materials, and encapsulation technologies.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0131473
