Abstract. A LiDAR Statistical Barnes Objective Analysis (LiSBOA) for the optimal design of lidar scans and retrieval of the velocity statistical moments is proposed. LiSBOA represents an adaptation of the classical Barnes scheme for the statistical analysis of unstructured experimental data in N-dimensional space, and it is a suitable technique for the evaluation over a structured Cartesian grid of the statistics of scalar fields sampled through scanning lidars. LiSBOA is validated and characterized via a Monte Carlo approach applied to a synthetic velocity field. This revisited theoretical framework for the Barnes objective analysis enables the formulation of guidelines for the optimal design of lidar experiments and efficient application of LiSBOA for the postprocessing of lidar measurements. The optimal design of lidar scans is formulated as a two-cost-function optimization problem, including the minimization of the percentage of the measurement volume not sampled with adequate spatial resolution and the minimization of the error on the mean of the velocity field. The optimal design of the lidar scans also guides the selection of the smoothing parameter and the total number of iterations to use for the Barnes scheme. LiSBOA is assessed against a numerical data set generated using the virtual lidar technique applied to the data obtained from a large eddy simulation (LES). The optimal sampling parameters for a scanning Doppler pulsed wind lidar are retrieved through LiSBOA, and then the estimated statistics are compared with those of the original LES data set, showing a maximum error of about 4 % for both mean velocity and turbulence intensity.
more »
« less
Synthetic Forest Stands and Point Clouds for Model Selection and Feature Space Comparison
The challenges inherent in field validation data, and real-world light detection and ranging (lidar) collections make it difficult to assess the best algorithms for using lidar to characterize forest stand volume. Here, we demonstrate the use of synthetic forest stands and simulated terrestrial laser scanning (TLS) for the purpose of evaluating which machine learning algorithms, scanning configurations, and feature spaces can best characterize forest stand volume. The random forest (RF) and support vector machine (SVM) algorithms generally outperformed k-nearest neighbor (kNN) for estimating plot-level vegetation volume regardless of the input feature space or number of scans. Also, the measures designed to characterize occlusion using spherical voxels generally provided higher predictive performance than measures that characterized the vertical distribution of returns using summary statistics by height bins. Given the difficulty of collecting a large number of scans to train models, and of collecting accurate and consistent field validation data, we argue that synthetic data offer an important means to parameterize models and determine appropriate sampling strategies.
more » « less- Award ID(s):
- 2134904
- PAR ID:
- 10472979
- Publisher / Repository:
- Remote Sensing
- Date Published:
- Journal Name:
- Remote Sensing
- Volume:
- 15
- Issue:
- 18
- ISSN:
- 2072-4292
- Page Range / eLocation ID:
- 4407
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)A LiDAR Statistical Barnes Objective Analysis (LiSBOA) for the optimal design of lidar scans and retrieval of the velocity statistical moments is proposed. LiSBOA represents an adaptation of the classical Barnes scheme for the statistical analysis of unstructured experimental data in N-dimensional space, and it is a suitable technique for the evaluation over a structured Cartesian grid of the statistics of scalar fields sampled through scanning lidars. LiSBOA is validated and characterized via a Monte Carlo approach applied to a synthetic velocity field. This revisited theoretical framework for the Barnes objective analysis enables the formulation of guidelines for the optimal design of lidar experiments and efficient application of LiSBOA for the postprocessing of lidar measurements. The optimal design of lidar scans is formulated as a two-cost-function optimization problem, including the minimization of the percentage of the measurement volume not sampled with adequate spatial resolution and the minimization of the error on the mean of the velocity field. The optimal design of the lidar scans also guides the selection of the smoothing parameter and the total number of iterations to use for the Barnes scheme. LiSBOA is assessed against a numerical data set generated using the virtual lidar technique applied to the data obtained from a large eddy simulation (LES). The optimal sampling parameters for a scanning Doppler pulsed wind lidar are retrieved through LiSBOA, and then the estimated statistics are compared with those of the original LES data set, showing a maximum error of about 4 % for both mean velocity and turbulence intensity.more » « less
-
Roberts, Scott (Ed.)more » « less
Abstract On-the-ground sample-based forest inventory methods have been the standard practice for more than a century, however, remote sensing technologies such as airborne laser scanning (ALS) are providing wall-to-wall inventories based on individual tree measurements. In this study, we assess the accuracy of individual tree height, diameter, and volume derived from field-cruising measurements and three ALS data-derived methods in a 1.1 ha stand using direct measurements acquired on felled trees and log-scale volume measurements. Results show that although height derived from indirect conventional field measurements and ALS were statistically equivalent to felled tree height measurements, ALS measured heights had lower root mean square error (RMSE) and bias. Individual tree diameters modeled using a height-to-diameter-at-breast-height model derived from local forest inventory data and the software ForestView had moderate RMSE (8.3–8.5 cm) and bias (-3.0 – -0.3 cm). The ALS-based methods underdetected trees but accounted for 78%–91% of the field reference harvested merchantable volume and 71%–99% of the merchantable volume scaled at the mill. The results also illustrate challenges of using mill-scaled volume estimates as validation data and highlight the need for more research in this area. Overall, the results provide key insights to forest managers on accuracies associated with conventional field-derived and ALS-derived individual tree inventories.
Study Implications: Forest inventory data provide critical information for operational decisions and forest product supply chain planning. Traditionally, forest inventories have used field sampling of stand conditions, which is time-intensive and cost-prohibitive to conduct at large spatial scales. Remote sensing technologies such as airborne laser scanning (ALS) provide wall-to-wall inventories based on individual tree measurements. This study advances our understanding of the accuracy of conventional field-derived and ALS-derived individual tree inventories by evaluating these inventories with felled tree and log scaling data. The results provide key insights to forest managers on errors associated with conventional field and ALS-derived individual tree measurements.
-
Background: Poststroke recovery depends on multiple factors and varies greatly across individuals. Using machine learning models, this study investigated the independent and complementary prognostic role of different patient-related factors in predicting response to language rehabilitation after a stroke. Methods: Fifty-five individuals with chronic poststroke aphasia underwent a battery of standardized assessments and structural and functional magnetic resonance imaging scans, and received 12 weeks of language treatment. Support vector machine and random forest models were constructed to predict responsiveness to treatment using pretreatment behavioral, demographic, and structural and functional neuroimaging data. Results: The best prediction performance was achieved by a support vector machine model trained on aphasia severity, demographics, measures of anatomic integrity and resting-state functional connectivity (F1=0.94). This model resulted in a significantly superior prediction performance compared with support vector machine models trained on all feature sets (F1=0.82, P <0.001) or a single feature set (F1 range=0.68–0.84, P <0.001). Across random forest models, training on resting-state functional magnetic resonance imaging connectivity data yielded the best F1 score (F1=0.87). Conclusions: While behavioral, multimodal neuroimaging data and demographic information carry complementary information in predicting response to rehabilitation in chronic poststroke aphasia, functional connectivity of the brain at rest after stroke is a particularly important predictor of responsiveness to treatment, both alone and combined with other patient-related factors.more » « less
-
more » « less
Abstract Wood accumulations influence geomorphic, hydraulic, and ecologic functions within a river corridor, but characterizing these accumulations presents challenges across a range of field and remote sensing methodologies. We evaluate the ability of handheld lidar scanners, specifically lidar‐scanning capabilities of a fourth‐generation iPad Pro, to collect three‐dimensional wood accumulation data, which can be used to inform measurements of wood volume, porosity, complexity, and roughness. We discuss the potential and limitations of this novel methodology for river research and management. We found that handheld lidar presents a cost‐effective input for data‐processing workflows that field measurements of wood accumulation dimensions cannot as easily replicate including (1) a user‐friendly means of data collection and visualization; (2) accurate comparisons of wood volume over time; (3) integration into workflows to measure porosity parameters; and (4) potential use in informing hydraulic and morphodynamic models. Consideration of study area constraints and intended use of scans are prerequisites to using handheld lidar as an effective tool. We identified some specific limitations of using handheld lidar scanners in wood‐rich river corridors, including (1) scanners perform poorly when wood is under water or surrounded by dense vegetation; (2) scanners require physical access to areas of interest at distances less than 5 m; (3) scans need to be manually georeferenced; and (4) scans require manual measurements for any dimensional data, which still have associated user time and error. Handheld lidar as a scientific tool is rapidly developing and there is substantial room for expansion of applications, utilization, and advances in the use of this tool in river research and management.
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/rs15184407
