Vinylogous urethane (VUO) based polymer networks are widely used as catalyst‐free vitrimers that show rapid covalent bond exchange at elevated temperatures. In solution, vinylogous ureas (VUN) undergo much faster bond exchange than VUOand are highly dynamic at room temperature. However, this difference in reactivity is not observed in their respective dynamic polymer networks, as VUOand VUNvitrimers prepared herein with very similar macromolecular architectures show comparable stress relaxation and creep behavior. However, by using mixtures of VUOand VUNlinkages within the same network, the dynamic reactions can be accelerated by an order of magnitude. The results can be rationalized by the effect of intermolecular hydrogen bonding, which is absent in VUOvitrimers, but is very pronounced for vinylogous urea moieties. At low concentrations of VUN, these hydrogen bonds act as catalysts for covalent bond exchange, while at high concentration, they provide a pervasive vinylogous urea ‐ urethane (VU) network of strong non‐covalent interactions, giving rise to phase separation and inhibiting polymer chain dynamics. This offers a straightforward design principle for dynamic polymer materials, showing at the same time the possible additive and synergistic effects of supramolecular and dynamic covalent polymer networks.
Materials with tunable modulus, viscosity, and complex viscoelastic spectra are crucial in applications such as self-healing, additive manufacturing, and energy damping. It is still challenging to predictively design polymer networks with hierarchical relaxation processes, as many competing factors affect dynamics. Here, networks with both pendant and telechelic architecture are synthesized with mixed orthogonal dynamic bonds to understand how the network connectivity and bond exchange mechanisms govern the overall relaxation spectrum. A hydrogen-bonding group and a vitrimeric dynamic crosslinker are combined into the same network, and multimodal relaxation is observed in both pendant and telechelic networks. This is in stark contrast to similar networks where two dynamic bonds share the same exchange mechanism. With the incorporation of orthogonal dynamic bonds, the mixed network also demonstrates excellent damping and improved mechanical properties. In addition, two relaxation processes arise when only hydrogen-bond exchange is present, and both modes are retained in the mixed dynamic networks. This work provides molecular insights for the predictive design of hierarchical dynamics in soft materials.
more » « less- NSF-PAR ID:
- 10473434
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 14
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract -
more » « less
Abstract Polymer networks containing dynamic covalent bonds do not exhibit traditional thermoset material properties. Such dynamic covalent networks have the ability to undergo stress relaxation processes associated with dynamic covalent bond exchange, imparting these materials with adaptive/responsive properties. Reported herein is an investigation on the effect that changing the amount of dynamic hindered alkylurea bonds has on the viscoelastic behavior of a series of poly(alkylurea‐
co ‐urethane) networks prepared by reacting a trifunctional isocyanate crosslinker with varying ratios of anN ‐isopropyl amine endcapped poly(propylene glycol) and a poly(propylene glycol). Films that contain >50% dynamic alkylurea bonds (wrt. alkylurea + urethane bonds) exhibit facile reprocessability, while those films with <50% dynamic alkylurea bonds exhibit poor reprocessability under these same conditions. Analysis of the temperature‐dependent shear rheometry and uniaxial stress relaxation measurements demonstrates that the primary stress relaxation mode in these materials is linked to the dynamic bond exchange process. Interestingly, these films exhibit an increasingly rich viscoelastic spectrum with increasing fraction of non‐dynamic urethane bonds. In addition to the primary relaxation process an order‐of‐magnitude slower relaxation emerges, which is identified as being related to the relaxation of larger, permanently crosslinked polymeric clusters in an otherwise dynamic matrix. -
Recent experimental and theoretical work has shown that sticker clustering can be used to enhance properties such as toughness and creep resistance of polymer networks. While it is clear that the changes in properties are related to a change in network topology, the mechanistic relationship is still not well understood. In this work, the effect of sticker clustering was investigated by comparing the dynamics of random copolymers with those where the stickers are clustered at the ends of the chain in the unentangled regime using both linear mechanics and diffusion measurements. Copolymers of N , N -dimethyl acrylamide (DMA) and pendant histidine groups were synthesized using reversible addition–fragmentation chain transfer (RAFT) polymerization. The clustered polymers were synthesized using a bifunctional RAFT agent, such that the midblock consisted of PDMA and the two end blocks were random copolymers of DMA and the histidine-functionalized monomer. Upon addition of Ni ions, transient metal-coordinate crosslinks are formed as histidine–Ni complexes. Combined studies of rheology, neutron scattering and self-diffusion measurements using forced Rayleigh scattering revealed changes to the network topology and stress relaxation modes. The network topology is proposed to consist of aggregates of the histidine–Ni complexes bridged by the non-associative midblock. Therefore, stress relaxation requires the cooperative dissociation of multiple bonds, resulting in increased relaxation times. The increased relaxation times, however, were accompanied by faster diffusion. This is attributed to the presence of defects such as elastically inactive chain loops. This study demonstrates that the effects of cooperative sticker dissociation can be observed even in the presence of a significant fraction of loop defects which are known to alter the nonlinear properties of conventional telechelic polymers.more » « less
-
Integration of multiple types of dynamic linkages into one polymer network is challenging and not well understood especially in the design and fabrication of dynamic polymer nanocomposites (DPNs). In this contribution, we present facile methods for synthesizing flexible, healable, conductive, and recyclable thermoresponsive DPNs using three dynamic chemistries playing distinct roles. Dynamic hydrogen bonds account for material flexibility and recycling character. Thiol-Michael exchange accounts for thermoresponsive properties. Diels–Alder reaction leads to covalent bonding between polymer matrix and nanocomposite. Overall, the presence of multiple types of orthogonal dynamic bonds provided a solution to the trade-off between enhanced mechanical performance and material elongation in DPNs. Efficient reinforcement was achieved using <1 wt % multiwalled carbon nanotubes as nanocomposite. Resulting DPNs showed excellent healability with over 3 MPa increase in stress compared to unreinforced materials. Due to multiple responsive dynamic linkages, >90% stress–relaxation was observed with self-healing achieved within 1 h of healing time. Increased mechanical strength, electrical conductivity, and reprocessability were achieved all while maintaining material flexibility and extensibility, hence highlighting the strong promise of these DPNs in the rapidly growing fields of flexible compliant electrodes and strain sensors.more » « less
-
Vitrimers, dynamic polymer networks with topology conserving exchange reactions, have emerged as a promising platform for sustainable and reprocessable materials. While prior work has documented how dynamic bonds impact stress relaxation and viscosity, their role on crystallization has not been systematically explored. Precise ethylene vitrimers with 8, 10, or 12 methylene units between boronic ester junctions were investigated to understand the impact of bond exchange on crystallization kinetics and morphology. Compared to linear polyethylene which has been heavily investigated for decades, a long induction period for crystallization is seen in the vitrimers ultimately taking weeks in the densest networks. An increase in melting temperatures ( T m ) of 25–30 K is observed with isothermal crystallization over 30 days. Both C 10 and C 12 networks initially form hexagonal crystals, while the C 10 network transforms to orthorhombic over the 30 day window as observed with wide angle X-ray scattering (WAXS) and optical microscopy (OM). After 150 days of isothermal crystallization, the three linker lengths led to double diamond (C 8 ), orthorhombic (C 10 ), and hexagonal (C 12 ) crystals indicating the importance of precision on final morphology. Control experiments on a precise, permanent network implicate dynamic bonds as the cause of long-time rearrangements of the crystals, which is critical to understand for applications of semi-crystalline vitrimers. The dynamic bonds also allow the networks to dissolve in water and alcohol-based solvents to monomers, followed by repolymerization while preserving the mechanical properties and melting temperatures.more » « less
