Achieving high electrical conductivity and thermoelectric power factor simultaneously for n‐type organic thermoelectrics is still challenging. By constructing two new acceptor‐acceptor n‐type conjugated polymers with different backbones and introducing the 3,4,5‐trimethoxyphenyl group to form the new n‐type dopant 1,3‐dimethyl‐2‐(3,4,5‐trimethoxyphenyl)‐2,3‐dihydro‐1
This content will become publicly available on November 20, 2024
The field of electronic textiles currently lacks n‐type polymer fibers that can complement the more established p‐type polymer fibers. Here, a highly conductive n‐type polymer fiber is obtained via wet‐spinning of n‐doped poly(3,7‐dihydrobenzo[1,2‐b:4,5‐b’]difuran‐2,6‐dione) (n‐PBDF). The electrical conductivity of the fibers increases from 1000 to 1600 S cm−1with increased draw during processing and correlates well with Young's modulus. Wide‐angle X‐ray scattering reveals the existence of a bimodal orientation of the polymer chains, favoring parallel alignment to the fiber axis with increased draw. After 14 d in 80% humid air, fiber conductivity stabilizes maintaining 81% of the initial conductivity. Although the electrical conductivity drops slightly over time, the Seebeck coefficient increases, resulting in the highest thermoelectric power factor being measured at 91 µW m−1K−2for the most drawn fiber 14 d after its fabrication. A proof‐of‐concept two‐couple thermoelectric textile is crafted by embroidering bundles of n‐type PBDF fibers and p‐type PEDOT:PSS fibers. The device generates 2.40 nW at a 22 °C temperature gradient. This work represents the initial steps and a crucial advancement toward fabricating high‐performance n‐type polymer fibers that can complement their p‐type counterparts to close the existing performance gap.
more » « less- NSF-PAR ID:
- 10475078
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Functional Materials
- ISSN:
- 1616-301X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract H ‐benzo[d]imidazole (TP‐DMBI), high electrical conductivity of 11 S cm−1and power factor of 32 μW m−1 K−2are achieved. Calculations using Density Functional Theory show that TP‐DMBI presents a higher singly occupied molecular orbital (SOMO) energy level of −1.94 eV than that of the common dopant 4‐(1, 3‐dimethyl‐2, 3‐dihydro‐1H ‐benzoimidazol‐2‐yl) phenyl) dimethylamine (N‐DMBI) (−2.36 eV), which can result in a larger offset between the SOMO of dopant and lowest unoccupied molecular orbital (LUMO) of n‐type polymers, though that effect may not be dominant in the present work. The doped polymer films exhibit higher Seebeck coefficient and power factor than films using N‐DMBI at the same doping levels or similar electrical conductivity levels. Moreover, TP‐DMBI doped polymer films offer much higher electron mobility of up to 0.53 cm2 V−1 s−1than films with N‐DMBI doping, demonstrating the potential of TP‐DMBI, and 3,4,5‐trialkoxy DMBIs more broadly, for high performance n‐type organic thermoelectrics. -
more » « less
Abstract Achieving high electrical conductivity and thermoelectric power factor simultaneously for n‐type organic thermoelectrics is still challenging. By constructing two new acceptor‐acceptor n‐type conjugated polymers with different backbones and introducing the 3,4,5‐trimethoxyphenyl group to form the new n‐type dopant 1,3‐dimethyl‐2‐(3,4,5‐trimethoxyphenyl)‐2,3‐dihydro‐1
H ‐benzo[d]imidazole (TP‐DMBI), high electrical conductivity of 11 S cm−1and power factor of 32 μW m−1 K−2are achieved. Calculations using Density Functional Theory show that TP‐DMBI presents a higher singly occupied molecular orbital (SOMO) energy level of −1.94 eV than that of the common dopant 4‐(1, 3‐dimethyl‐2, 3‐dihydro‐1H ‐benzoimidazol‐2‐yl) phenyl) dimethylamine (N‐DMBI) (−2.36 eV), which can result in a larger offset between the SOMO of dopant and lowest unoccupied molecular orbital (LUMO) of n‐type polymers, though that effect may not be dominant in the present work. The doped polymer films exhibit higher Seebeck coefficient and power factor than films using N‐DMBI at the same doping levels or similar electrical conductivity levels. Moreover, TP‐DMBI doped polymer films offer much higher electron mobility of up to 0.53 cm2 V−1 s−1than films with N‐DMBI doping, demonstrating the potential of TP‐DMBI, and 3,4,5‐trialkoxy DMBIs more broadly, for high performance n‐type organic thermoelectrics. -
null (Ed.)The emerging field of electronic textiles is currently hindered by a lack of mechanically robust fibers and yarns that efficiently conduct electricity. Conjugated polymer fibers are promising candidates to meet those requirements. In this work, a wet-spinning process is described to fabricate PEDOT:PSS fibers with electrical conductivities up to 3663 ± 326 S cm −1 , Young's moduli up to 22 GPa and tensile strength of 550 MPa, through inclusion of a sulfuric acid drawing step. The mechanism by which the sulfuric acid drawing step enhances the electrical and mechanical properties of the fibers is investigated. Moreover, the electrical conductivity of these fibers was further increased to 4039 ± 215 S cm −1 by immersing the fibers in sulfuric acid for additional time, at the expense, however, of lowering their Young's modulus and tensile strength. Additionally, we demonstrate the use of the fibers in various electronic textile applications such as: (a) flexible textile interconnections in an LED circuit, (b) a proof of concept thermochromic fiber bundle that changes color on demand, (c) a thermoelectric textile device using the fibers as the p-type legs, and (d) using the fibers as the channel in an organic electrochemical transistor to build an LED dimmer. This work presents a unique type of material with the potential of becoming a cornerstone in the emerging field of electronic textiles.more » « less
-
more » « less
Abstract Porous carbon plays a significant role in all‐solid‐state lithium‐sulfur batteries (ASSLSBs) to enhance the electronic conductivity of sulfur. However, the conventional porous carbon used in cell with liquid electrolyte exhibits low efficiency in ASSLSBs because the immobile solid electrolyte (SE) cannot reach sulfur confined in the deep pores. The structure and distribution of pores in carbon highly impact the electrochemical performance of ASSLSBs. Herein, a N‐doped carbon fiber with micropores located only at the surface with an ultrahigh surface area of 1519 m2 g–1is designed. As the porous layer is only on the surface, the sulfur hosted in the pores can effectively contact SE; meanwhile the dense core provides excellent electrical conductivity. Therefore, this structurally designed carbon fiber enhances both electron and ion accessibilities, promotes charge transfer, and thus dramatically improves the reaction kinetic in the ASSLSBs and boosts sulfur utilization. Compared to the vapor grown carbon fibers, the ASSLSBs using PAN‐derived porous carbon fibers exhibit three times enhancement in the initial capacity of 1166 mAh g–1at C/20. An exceedingly cycling stability of 710 mAh g–1is maintained after 220 cycles at C/10, and satisfactory rate capability of 889 mAh g–1at C/2 is achieved.
-
more » « less
Abstract N‐Type thermoelectrics typically consist of small molecule dopant+polymer host. Only a few polymer dopant+polymer host systems have been reported, and these have lower thermoelectric parameters. N‐type polymers with high crystallinity and order are generally used for high‐conductivity (
) organic conductors. Few n‐type polymers with only short‐range lamellar stacking for high‐conductivity materials have been reported. Here, we describe an n‐type short‐range lamellar‐stacked all‐polymer thermoelectric system with highest of 78 S−1, power factor ( PF ) of 163 μW m−1 K−2, and maximum Figure of merit (ZT ) of 0.53 at room temperature with a dopant/host ratio of 75 wt%. The minor effect of polymer dopant on the molecular arrangement of conjugated polymer PDPIN at high ratios, high doping capability, high Seebeck coefficient (S ) absolute values relative to, and atypical decreased thermal conductivity ( ) with increased doping ratio contribute to the promising performance.
