An official website of the United States government
Rotational inertial mechanisms can produce mass amplification effects with only a small physical mass by converting translation to the rotation of a fly-wheel, which makes them attractive for structural control applications. A variable inertia rotational mechanism (VIRM) is a nonlinear mechanism in which masses in the flywheel can move radially, causing variable inertia. The performance of the VIRM depends on its parameters and the objectives considered. This paper presents the optimum parameters of the VIRM in a single-degree-of-freedom (SDOF) system using an artificial neural network (ANN) model. Optimum VIRM values of several sets of SDOF systems are used to train the ANN model. These values are determined using numerical simulations, and the RMS amplitude of total energy in the system is considered the optimization objective. Numerical simulations of VIRM systems are presented to demonstrate the effective-ness and examine the ANN-based machine learning optimization process's performance.
more »
« less
Experimental Investigation of a Variable Inertia Rotational Mechanism
Recent advances in passive structural control systems have included devices that exploit nonlinear behavior. The explicit inclusion of nonlinearities allows these passive devices to be designed to have behavior and performance that varies with different load types and amplitudes. The variable inertial rotational mechanism (VIRM) is an example of a nonlinear passive control device and consists of a mechanism that converts linear motion into rotational motion and an attached flywheel that includes masses that can move radially inside the flywheel. The radial motion of the VIRM flywheel masses results in the flywheel moment of inertia continuously varying during the response of the device. Despite a potentially small physical mass, the VIRM can provide to a system large added mass effects that can vary greatly depending on the flywheel moment of inertia. The large and variable mass effects provided by the VIRM can significantly shift the natural frequency and reduce the response amplitude of an underlying structure. While the VIRM has been investigated numerically by a number of authors, the experimental study of these devices has been limited. Moreover, most of the studies have considered semi-active or active variable inertia flywheels. The investigation of passive VIRMs are rare. This study aims to address these gaps in knowledge and experimentally investigate the response modification and pseudo resonance frequency changes of an underlying structure produced by the VIRM considering different loading conditions. For this experimental investigation, a VIRM was designed and fabricated that utilizes a lead screw and a flywheel that contains masses connected to springs that can move radially in the flywheel. This VIRM was then attached to a single-degree-of-freedom structure and subjected to different excitation types using a shake table. With data from these experimental tests, the overall fundamental frequency and the response of the system was evaluated using the experimentally estimated system transfer functions. The results of this study shows that the inclusion of the VIRM reduces the response amplitude and significantly shifted the pseudo resonance frequency of the underlying structure and that these shifts in pseudo resonance frequency are highly dependent on the loading amplitude.
more »
« less
- Award ID(s):
- 1944513
- PAR ID:
- 10477245
- Publisher / Repository:
- Springer
- Date Published:
- Journal Name:
- Conference Proceedings of the Society for Experimental Mechanics Series
- ISBN:
- 978-3-031-36663-5
- Subject(s) / Keyword(s):
- Structural Dynamics Variable Inertia Nonlinear Shake Table Testing Natural Frequency Shifts
- Format(s):
- Medium: X
- Location:
- Austin, TX, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Centrifugal pendulum vibration absorbers (CPVAs) are essentially collections of pendulums attached to a rotor or rotating component or components within a mechanical system for the purpose of mitigating the typical torsional surging that is inherent to internal combustion engines and electric motors. The dynamic stability and performance of CPVAs are highly dependent on the motion path defined for their pendulous masses. Assemblies of absorbers are tuned by adjusting these paths such that the pendulums respond to problematic orders (multiples of average rotation speed) in a way that smooths the rotational accelerations arising from combustion or other non-uniform rotational acceleration events. For most motion paths, pendulum tuning indeed shifts as a function of the pendulum response amplitude. For a given motion path, the tuning shift that occurs as pendulum amplitude varies produces potentially undesirable dynamic instabilities. Large amplitude pendulum motion that mitigates a high percentage of torsional oscillation while avoiding instabilities brought on by tuning shift introduces complexity and hazards into CPVA design processes. Therefore, identifying pendulum paths whose tuning order does not shift as the pendulum amplitude varies, so-called tautochronic paths, may greatly simplify engineering design processes for generating high-performing CPVAs. This paper expands on the work of Sabatini, in which a mathematical condition for tautochronicity is identified for a class of differential equations that includes those that arise in the modeling of the motion of a pendulum in a centrifugal field. The approach is based on a transformation from the physical coordinate to a standard Hamiltonian system. We show that transforming a nonlinear oscillator made tautochronic through path modification actually transforms the nonlinear oscillator into a simple harmonic oscillator. To illustrate the new approach and results, the technique is applied to the simplified problem of determining the cut-out shape that produces tautochronic motion for a mass sliding in the cut-out of a larger mass that is free to translate horizontally without friction. In the simplified problem, centrifugal acceleration is replaced by constant gravitational acceleration and rotation of the rotor inertia is replaced by the translation of the large base mass.more » « less
-
Centrifugal pendulum vibration absorbers (CPVAs) are essentially collections of pendulums attached to a rotor or rotating component or components within a mechanical system for the purpose of mitigating the typical torsional surging that is inherent to internal combustion engines and electric motors. The dynamic stability and performance of CPVAs are highly dependent on the motion path defined for their pendulous masses. Assemblies of absorbers are tuned by adjusting these paths such that the pendulums respond to problematic orders (multiples of average rotation speed) in a way that smooths the rotational accelerations arising from combustion or other nonuniform rotational acceleration events. For most motion paths, pendulum tuning indeed shifts as a function of the pendulum response amplitude. For a given motion path, the tuning shift that occurs as pendulum amplitude varies produces potentially undesirable dynamic instabilities. Large amplitude pendulum motion that mitigates a high percentage of torsional oscillation while avoiding instabilities brought on by tuning shift introduces complexity and hazards into CPVA design processes. Therefore, identifying pendulum paths whose tuning order does not shift as the pendulum amplitude varies, so-called tautochronic paths, may greatly simplify engineering design processes for generating high-performing CPVAs. To illustrate this new approach and results, a tautochronic cut-out shape producing constant period system motion is obtained for a simplified problem involving a mass sliding in the cut-out of a larger mass that is free to translate horizontally without friction in a constant gravitational field, where the translating base mass replaces the rotating rotor in the centrifugal field.more » « less
-
Natural Frequencies of structures is an elegant intrinsic property that is essential for many Civil Structural applications, as Structural Health Monitoring and Simulation Modeling. The physically tangible relation between the frequency of the structures and its dynamic characteristics was the impetus for using different time/frequency based methods to quantify this fundamental property. Unfortunately, the disruption effect of noise requires incorporating advanced sensors, that provide signals with a low noise-intensity, to accurately identify the fundamental frequencies of the structure. This article solves this bottleneck via exploiting the Stochastic Resonance (SR) phenomena to extract the fundamental frequencies of a bridge using an acceleration recorded by a conventional portable sensor as the sensor implemented in small portable accelerometer. The portable accelerometer device has an M9 motion coprocessor designed mainly for tracking human activities. Human activities have an exaggerated amplitude when it is compared to the structural responses. Therefore, if an iPhone device is used to record the response of the structure (for example a bridge) the structure response will be swamped by severe surrounding noise because of its small amplitude. Therefore, in this vein, the SR phenomena has been employed to use rather than suppress the noise to magnify the feeble bridge response in the recorded acceleration and hence identify the corresponding frequency. The fidelity of the proposed approach has been verified using the data of a field experiment. The bridge frequencies are identified first using conventional vibration analysis, thereafter, the portable accelerometer has been attached to the bridge rail to record the bridge vibration under the passing traffic. The recorded data has been processed using a new Developed Underdamped Pinning Stochastic Resonance (DUPSR) technique to quantify the bridge frequency.more » « less
-
null (Ed.)In this paper, we present a sequential motion planning and control method for generating somersaults on bipedal robots. The somersault (backflip or frontflip) is considered as a coupling between an axile hopping motion and a rotational motion about the center of mass of the robot; these are encoded by a hopping Spring-loaded Inverted Pendulum (SLIP) model and the rotation of a Flywheel, respectively. We thus present the Flywheel SLIP model for generating the desired motion on the ground phase. In the flight phase, we present a momentum transmission method to adjust the orientation of the lower body based on the conservation of the centroidal momentum. The generated motion plans are realized on the full-dimensional robot via momentum-included task space control. Finally, the proposed method is implemented on a modified version of the bipedal robot Cassie in simulation wherein multiple somersault motions are generated.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
