An official website of the United States government
The optical extinction caused by a small particle, such as an aerosol particle, is an important measurable quantity. Understanding the influence of atmospheric aerosols on the climate, assessing visibility in urban environments, and remote sensing applications such as lidar all need accurate measurements of particle extinction. While multiple methods are known to measure extinction, digital in-line holography (DIH) features the unique ability to provide contact-free images of particles simultaneously with estimates for the extinction cross section. This is achieved through an integration of a measured hologram followed by an extrapolation. By means of a supercontinuum laser, we investigate the measurement of the cross section via DIH for stationary particles across a broad spectrum, from 440 nm to 1040 nm. The particles considered include a 50 µm glass microsphere, a volcanic ash particle, and an iron(III) oxide particle. The results show the ability to estimate a particle’s cross section to within 10% error across portions of the spectrum and approximately 20% error otherwise. An examination of the accompanying hologram-derived particle images reveals details in the images that evolve with wavelength. The behavior suggests a basic means to resolve whether absorption or scattering dominates a particle’s extinction.
more »
« less
Measuring extinction with digital holography: noisy holograms
Digital in-line holography is a versatile method to obtain lens-less images of small particles, such as aerosol particles, ranging from several to over one hundred microns in size. It has been shown theoretically, and verified by measurement, that a particle’s extinction cross section can also be obtained from a digital hologram. The process involves a straightforward integration, but if noise is present it fails to give accurate results. Here we present a method to reduce the noise in measured holograms of single particles for the purpose of rendering the cross-section estimation more effective. The method involves masking the complex-valued particle image-amplitude obtained from a noisy hologram followed by a Fresnel transformation to generate a new noise-reduced hologram. Examples are given at two wavelengths, 440 nm and 1040 nm, where the cross section is obtained for a micro-sphere particle and several non-spherical particles approximately 50 microns in size.
more »
« less
- Award ID(s):
- 2107715
- PAR ID:
- 10478198
- Publisher / Repository:
- Optical Society of America
- Date Published:
- Journal Name:
- Optics Express
- Volume:
- 31
- Issue:
- 26
- ISSN:
- 1094-4087; OPEXFF
- Format(s):
- Medium: X Size: Article No. 43213
- Size(s):
- Article No. 43213
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
A method is developed to isolate the interference-fringe pattern associated with an individual particle from a single digital in-line hologram containing overlapping patterns from multiple particles. The method is illustrated with a measured hologram of road-dust aerosol particles nominally 20-50 µm in size. It is further tested for 2.5-3.0 µm particles by simulation with the discrete dipole approximation. By incrementally degrading a hologram’s resolution, the method is shown to perform well for particles that are poorly resolved, at least for the first few central fringes in the pattern. The method may be useful in cases where particle characterization is done directly from a hologram, i.e., instead of from the reconstructed images.more » « less
-
This work applies digital holography to image stationary micro-particles in color. The approach involves a Michelson interferometer to mix reference light with the weak intensity light backscattered from a distribution of particles. To enable color images, three wavelengths are used, 430, 532, and 633 nm, as primary light sources. Three separate backscattered holograms are recorded simultaneously, one for each wavelength, which are resolved without spectral cross talk using a three-CMOS prism sensor. Fresnel diffraction theory is used to render monochrome images from each hologram. The images are then combined via additive color mixing with red, green, and blue as the primary colors. The result is a color image similar in appearance to that obtained with a conventional microscope in white-light epi-illumination mode. A variety of colored polyethylene micro-spheres and nonspherical dust particles demonstrate the feasibility of the approach and illustrate the effect of simple speckle-noise suppression and white balance methods. Finally, a chromaticity analysis is applied that is capable of differentiating particles of different colors in a quantitative and objective manner.more » « less
-
Water vapor condensation on hygroscopic aerosol particles plays an important role in cloud formation, climate change, secondary aerosol formation, and aerosol aging. Conventional understanding considers deliquescence of nanosized hygroscopic aerosol particles a nearly instantaneous solid to liquid phase transition. However, the nanoscale dynamics of water condensation and aerosol particle dissolution prior to and during deliquescence remain obscure due to a lack of high spatial and temporal resolution single particle measurements. Here we use real time in situ transmission electron microscopy (TEM) imaging of individual sodium chloride (NaCl) nanoparticles to demonstrate that water adsorption and aerosol particle dissolution prior to and during deliquescence is a multistep dynamic process. Water condensation and aerosol particle dissolution was investigated for lab generated NaCl aerosols and found to occur in three distinct stages as a function of increasing RH. First, a < 100 nm water layer adsorbed on the NaCl cubes and caused sharp corners to dissolve and truncate. The water layer grew to several hundred nanometers with increasing RH and was rapidly saturated with solute, as evidenced by halting of particle dissolution. Adjacent cube corners displayed second-scale curvature fluctuations with no net particle dissolution or water layer thickness change. We propose that droplet solute concentration fluctuations drove NaCl transport from regions of high local curvature to regions of low curvature. Finally, we observed coexistence of a liquid water droplet and aerosol particle immediately prior to deliquescence. Particles dissolved discretely along single crystallographic directions, separating by few second lag times with no dissolution. This work demonstrates that deliquescence of simple pure salt particles with sizes in the range of 100 nm to several microns is not an instantaneous phase transition and instead involves a range of complex dissolution and water condensation dynamics.more » « less
-
null (Ed.)Biomass burning (BB) aerosols contribute to climate forcing, but much is still unknown about the extent of this forcing, owing partially to the high level of uncertainty regarding BB aerosol optical properties. A key optical parameter is the refractive index (RI), which influences the absorbing and scattering properties of aerosols. This quantity is not measured directly, but it is obtained by fitting the measured scattering cross section and extinction cross section to a theoretical model using the RI as a fitting parameter. We used the Rayleigh–Debye–Gans (RDG) approximation to retrieve the complex RI of freshly emitted BB aerosol from two fuels (eucalyptus and olive) from Africa in the spectral range of 500–580 nm. Experimental measurements were carried out using cavity ring-down spectroscopy to measure extinction over the range of wavelengths of 500–580 nm and nephelometry to measure scattering at three wavelengths of 450, 550, and 700 nm for size-selected BB aerosol particles. The fuels were combusted in a tube furnace at a temperature of 800 °C, which is representative of the flaming stage of burning. Filter samples were collected and imaged using tunneling electron microscopy to obtain information on the morphology and size of the particles, which was used in the RDG calculations. The mean radii of the monomers were 27.8 and 31.5 nm for the eucalyptus and the olive fuels, respectively. The components of the retrieved complex RI were in the range of 1.31 ≤ n ≤ 1.56 and 0.045 ≤ k ≤ 0.468. The real and complex parts of the RI increase with increasing particle mobility diameter. The real part of the RI is lower, and the imaginary part is higher than what was recommended in literature for black carbon generated by propane or field measurements from fires of mixed wood samples. Fuel dependent results from controlled laboratory experiments can be used in climate modeling efforts and to constrain field measurements from biomass burning.more » « less
