More Like this

1. Measurement of the mass dependence of the transverse momentum of lepton pairs in Drell–Yan production in proton–proton collisions at $$\sqrt{s} = 13\,\text {Te\hspace{-.08em}V} $$

   https://doi.org/10.1140/epjc/s10052-023-11631-7  

   Tumasyan, A. ; Adam, W. ; Andrejkovic, J. W. ; Bergauer, T. ; Chatterjee, S. ; Dragicevic, M. ; Valle, A. Escalante ; Frühwirth, R. ; Jeitler, M. ; Krammer, N. ; et al ( July 2023 , The European Physical Journal C)

   The double differential cross sections of the Drell–Yan lepton pair ($$\ell ^+\ell ^-$$${\ell }^{+}{\ell }^{-}$, dielectron or dimuon) production are measured as functions of the invariant mass$$m_{\ell \ell }$$$m_{\ell \ell }$, transverse momentum$$p_{\textrm{T}} (\ell \ell )$$$p_{\text{T}}\left(\ell \ell \right)$, and$$\varphi ^{*}_{\eta }$$${\phi }_{\eta }^{\ast }$. The$$\varphi ^{*}_{\eta }$$${\phi }_{\eta }^{\ast }$observable, derived from angular measurements of the leptons and highly correlated with$$p_{\textrm{T}} (\ell \ell )$$$p_{\text{T}}\left(\ell \ell \right)$, is used to probe the low-$$p_{\textrm{T}} (\ell \ell )$$$p_{\text{T}}\left(\ell \ell \right)$region in a complementary way. Dilepton masses up to 1$$\,\text {Te\hspace{-.08em}V}$$$\text{Te}\text{V}$are investigated. Additionally, a measurement is performed requiring at least one jet in the final state. To benefit from partial cancellation of the systematic uncertainty, the ratios of the differential cross sections for various$$m_{\ell \ell }$$$m_{\ell \ell }$ranges to those in the Z mass peak interval are presented. The collected data correspond to an integrated luminosity of 36.3$$\,\text {fb}^{-1}$$${\text{fb}}^{-1}$of proton–proton collisions recorded with the CMS detector at the LHC at a centre-of-mass energy of 13$$\,\text {Te\hspace{-.08em}V}$$$\text{Te}\text{V}$. Measurements are compared with predictions based on perturbative quantum chromodynamics, including soft-gluon resummation.

    

   more » « less
2. Ultrahigh evaporative heat transfer measured locally in submicron water films

   https://doi.org/10.1038/s41598-022-26182-2  

   Wang, Xiaoman ; Ghaffarizadeh, S. Arman ; He, Xiao ; McGaughey, Alan J. H. ; Malen, Jonathan A. ( December 2022 , Scientific Reports)

   Thin film evaporation is a widely-used thermal management solution for micro/nano-devices with high energy densities. Local measurements of the evaporation rate at a liquid-vapor interface, however, are limited. We present a continuous profile of the evaporation heat transfer coefficient ($$h_{\text {evap}}$$$h_{\text{evap}}$) in the submicron thin film region of a water meniscus obtained through local measurements interpreted by a machine learned surrogate of the physical system. Frequency domain thermoreflectance (FDTR), a non-contact laser-based method with micrometer lateral resolution, is used to induce and measure the meniscus evaporation. A neural network is then trained using finite element simulations to extract the$$h_{\text {evap}}$$$h_{\text{evap}}$profile from the FDTR data. For a substrate superheat of 20 K, the maximum$$h_{\text {evap}}$$$h_{\text{evap}}$is$$1.0_{-0.3}^{+0.5}$$$1.0_{-0.3}^{+0.5}$ MW/$$\text {m}^2$$${\text{m}}^2$-K at a film thickness of$$15_{-3}^{+29}$$${15}_{-3}^{+29}$ nm. This ultrahigh$$h_{\text {evap}}$$$h_{\text{evap}}$value is two orders of magnitude larger than the heat transfer coefficient for single-phase forced convection or evaporation from a bulk liquid. Under the assumption of constant wall temperature, our profiles of$$h_{\text {evap}}$$$h_{\text{evap}}$and meniscus thickness suggest that 62% of the heat transfer comes from the region lying 0.1–1 μm from the meniscus edge, whereas just 29% comes from the next 100 μm.

    

   more » « less
3. Semileptonic form factors for $$B\rightarrow D^*\ell \nu $$ at nonzero recoil from $$2+1$$-flavor lattice QCD: Fermilab Lattice and MILC Collaborations

   https://doi.org/10.1140/epjc/s10052-022-10984-9  

   Bazavov, A. ; DeTar, C. E. ; Du, D. ; El-Khadra, A. X. ; Gámiz, E. ; Gelzer, Z. ; Gottlieb, S. ; Heller, U. M. ; Kronfeld, A. S. ; Laiho, J. ; et al ( December 2022 , The European Physical Journal C)

   We present the first unquenched lattice-QCD calculation of the form factors for the decay$$B\rightarrow D^*\ell \nu $$$B\to D^{\ast }\ell \nu$at nonzero recoil. Our analysis includes 15 MILC ensembles with$$N_f=2+1$$$N_f=2+1$flavors of asqtad sea quarks, with a strange quark mass close to its physical mass. The lattice spacings range from$$a\approx 0.15$$$a\approx 0.15$fm down to 0.045 fm, while the ratio between the light- and the strange-quark masses ranges from 0.05 to 0.4. The valencebandcquarks are treated using the Wilson-clover action with the Fermilab interpretation, whereas the light sector employs asqtad staggered fermions. We extrapolate our results to the physical point in the continuum limit using rooted staggered heavy-light meson chiral perturbation theory. Then we apply a model-independent parametrization to extend the form factors to the full kinematic range. With this parametrization we perform a joint lattice-QCD/experiment fit using several experimental datasets to determine the CKM matrix element$$|V_{cb}|$$$|V_{\mathrm{cb}}|$. We obtain$$\left| V_{cb}\right| = (38.40 \pm 0.68_{\text {th}} \pm 0.34_{\text {exp}} \pm 0.18_{\text {EM}})\times 10^{-3}$$$\left(V_{\mathrm{cb}}\right)=(38.40\pm 0.{68}_{\text{th}}\pm 0.{34}_{\text{exp}}\pm 0.{18}_{\text{EM}})\times {10}^{-3}$. The first error is theoretical, the second comes from experiment and the last one includes electromagnetic and electroweak uncertainties, with an overall$$\chi ^2\text {/dof} = 126/84$$${\chi }^2\text{/dof}=126/84$, which illustrates the tensions between the experimental data sets, and between theory and experiment. This result is in agreement with previous exclusive determinations, but the tension with the inclusive determination remains. Finally, we integrate the differential decay rate obtained solely from lattice data to predict$$R(D^*) = 0.265 \pm 0.013$$$R\left(D^{\ast }\right)=0.265\pm 0.013$, which confirms the current tension between theory and experiment.

    

   more » « less
4. Measurements of the Higgs boson production cross section and couplings in the W boson pair decay channel in proton-proton collisions at $$\sqrt{s}=13\,\text {Te\hspace{-.08em}V} $$

   https://doi.org/10.1140/epjc/s10052-023-11632-6  

   Tumasyan, A. ; Adam, W. ; Andrejkovic, J. W. ; Bergauer, T. ; Chatterjee, S. ; Damanakis, K. ; Dragicevic, M. ; Escalante Del Valle, A. ; Hussain, P. S. ; Jeitler, M. ; et al ( July 2023 , The European Physical Journal C)

   Production cross sections of the standard model Higgs boson decaying to a pair of W bosons are measured in proton-proton collisions at a center-of-mass energy of 13$$\,\text {Te\hspace{-.08em}V}$$$\text{Te}\text{V}$. The analysis targets Higgs bosons produced via gluon fusion, vector boson fusion, and in association with a W or Z boson. Candidate events are required to have at least two charged leptons and moderate missing transverse momentum, targeting events with at least one leptonically decaying W boson originating from the Higgs boson. Results are presented in the form of inclusive and differential cross sections in the simplified template cross section framework, as well as couplings of the Higgs boson to vector bosons and fermions. The data set collected by the CMS detector during 2016–2018 is used, corresponding to an integrated luminosity of 138$$\,\text {fb}^{-1}$$${\text{fb}}^{-1}$. The signal strength modifier$$\mu $$$\mu$, defined as the ratio of the observed production rate in a given decay channel to the standard model expectation, is measured to be$$\mu = 0.95^{+0.10}_{-0.09}$$$\mu =0.{95}_{-0.09}^{+0.10}$. All results are found to be compatible with the standard model within the uncertainties.

    

   more » « less
5. 3D Mirror Symmetry for Instanton Moduli Spaces

   https://doi.org/10.1007/s00220-023-04831-5  

   Koroteev, Peter ; Zeitlin, Anton M. ( September 2023 , Communications in Mathematical Physics)

   We prove that the Hilbert scheme ofkpoints on$${\mathbb {C}}^2$$$C^2$($$\hbox {Hilb}^k[{\mathbb {C}}^2]$$${\text{Hilb}}^k\left[C^2\right]$) is self-dual under three-dimensional mirror symmetry using methods of geometry and integrability. Namely, we demonstrate that the corresponding quantum equivariant K-theory is invariant upon interchanging its Kähler and equivariant parameters as well as inverting the weight of the$${\mathbb {C}}^\times _\hbar $$$C_{ħ}^{\times }$-action. First, we find a two-parameter family$$X_{k,l}$$$X_{k,l}$of self-mirror quiver varieties of type A and study their quantum K-theory algebras. The desired quantum K-theory of$$\hbox {Hilb}^k[{\mathbb {C}}^2]$$${\text{Hilb}}^k\left[C^2\right]$is obtained via direct limit$$l\longrightarrow \infty $$$l⟶\infty$and by imposing certain periodic boundary conditions on the quiver data. Throughout the proof, we employ the quantum/classical (q-Langlands) correspondence between XXZ Bethe Ansatz equations and spaces of twisted$$\hbar $$$ħ$-opers. In the end, we propose the 3d mirror dual for the moduli spaces of torsion-free rank-Nsheaves on$${\mathbb {P}}^2$$$P^2$with the help of a different (three-parametric) family of type A quiver varieties with known mirror dual.

    

   more » « less