An official website of the United States government
A solvent-free post-treatment process known as vapor phase infiltration (VPI) is used to engineer the organic solvent reverse osmosis (OSRO) performance of polymer of intrinsic microporosity 1 (PIM-1) membranes via infiltration of trimethylaluminum (TMA) metal-organic vapor. The infiltration of inorganic aluminum constituents hybridizes the pure polymer PIM-1 into an organic-inorganic material (AlOxHy/PIM-1) with enhanced chemical stability. A homogenous distribution of inorganic loading in PIM-1 is achieved due to the reaction-limited infiltration mechanism, and the OSRO performance is enhanced as a result. OSRO separations of ethanol/isooctane mixtures using these membranes are shown to be capable of breaking the azeotropic composition with a separation factor for ethanol over isooctane greater than 5 and an ethanol permeance of 0.1 Lm–2h–1bar–1. Thus, these organic-inorganic hybrid membranes created via VPI show promise as an alternative method for separating azeotropic liquid mixtures.
more »
« less
Room Temperature Evaporation Behavior of Homogeneous Azeotropes Used in Art Conservation Cleaning Treatments
Cleaning painted surfaces of their grime, aged varnishes, and discolored overpaint is one of the most common interventive treatments for art conservators. Carefully concocted solvent mixtures navigate the solubility differences between the material removed and the original paint underneath. However, these solutions may be altered by differential evaporation rates of the component solvents (zeotropic behavior), potentially leading to ineffectively weak cleaning or conversely overly strong residual liquid capable of damaging the underlying paint. Azeotropic solvent blends, which maintain a constant composition during evaporation, offer a promising solution. These blends consist of two or more solvents combined at precise concentrations to function as a single solvent. Additionally, pressure-maximum azeotropes feature higher vapor pressure compared to other mixtures, further minimizing contact time and sorption of the solvents into artworks. This study examines azeotropes of isopropanol with n-hexane and 2-butanone in cyclohexane, which have been used previously in art conservation. The evaporation behavior at room temperature of these boiling point azeotropes was assessed using vapor pressure measurements, refractive index determinations, gravimetric analysis, and gas chromatography. Results showed changes in composition during evaporation and found that the actual room temperature azeotropic composition can vary between 1 and 10% v/v in concentration with those commonly reported at their boiling points. Art conservators should be cautious when using azeotropic blends reported at boiling points significantly higher than room temperature. To ensure the safety and efficacy of these mixtures, it is recommended to determine individual azeotropic cleaning blends experimentally before their use.
more »
« less
- Award ID(s):
- 1725674
- PAR ID:
- 10479098
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Applied Sciences
- Volume:
- 13
- Issue:
- 21
- ISSN:
- 2076-3417
- Page Range / eLocation ID:
- 11962
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)The standard random phase approximation (RPA) model is applied to investigate the cononsolvency of polymers in mixtures of two good solvents. It is shown that in the RPA framework, the two types of cononsolvency behaviors reported in previous theoretical studies can be unified under the same concept of mean-field density correlations. The two types of cononsolvency are distinguished by the solvent composition at which maximum immiscibility is predicted to occur. The maximum immiscibility occurs with the cosolvent being the minor solvent if the driving mechanism is the preferential solvation of polymers. For the cononsolvency driven by the preferential mixing of solvents, the maximum immiscibility is predicted at a symmetric solvent composition. An interplay of the two driving forces gives rise to a reentrant behavior in which the cononsolvency of the two types switches from one to the other, through a “conventional” region where the overall solvent quality varies monotonically with the solvent composition. The RPA model developed in this work provides a unified analytical framework for understanding the conformational and solubility transition of polymers in multi-solvent mixtures. Such findings highlight the complex role played by the solvents in polymer solutions, a problem of fundamental and practical interest in diverse applications of materials science.more » « less
-
Nonaqueous dispersions of graphene nanoplatelets (GrNPs) can be used to prepare thin films and coatings free of surfactants, but typically involve polar organic solvents with high boiling points and low exposure limits. Here we describe the mechanochemical exfoliation and dispersion of GrNPs in volatile aprotic solvents such as ethyl acetate (EtOAc) and acetone, which rank favorably in green solvent selection guides. GrNPs in powder form were exfoliated with solvent on a horizontal ball mill for 48 hours then sonicated at moderate power, to produce suspensions in excess of 300 µg/mL with minimum loss of dispersion stability over 7 weeks at room temperature. Atomic force microscopy (AFM) of individual particles indicate a median thickness and lateral width of 8‒10 layers and 180 nm, respectively. GrNP films can be deposited by conventional airbrush equipment with a dry time of seconds and applied as layers and coatings that enhance the reproducibility and performance of electronic devices. We demonstrate the utility of spray-coated GrNPs as contact layers for low-cost electrochemical sensing with improvements in intrabatch reproducibility, and as conformal coatings on metal heat sinks with enhanced rates of heat dissipation.more » « less
-
Emergent, flowable electrochemical energy storage technologies suitable for grid-scale applications are often limited by sluggish electron transfer kinetics that impede overall energy conversion efficiencies. To improve our understanding of these kinetic limitations in heterometallic charge carriers, we study the role of solvent in influencing the rates of heterogeneous electron transfer, demonstrating its impact on the kinetics of di-titanium substituted polyoxovanadate-alkoxide cluster, [Ti 2 V 4 O 5 (OMe) 14 ]. Our studies also illustrate that the one electron reduction and oxidation processes exhibit characteristically different rates, suggesting that different mechanisms of electron transfer are operative. We report that a 1 : 4 v/v mixture of propylene carbonate and acetonitrile can lead to a three-fold increase in the rate of electron transfer for one electron oxidation, and a two-fold increase in the one electron reduction process as compared to pure acetonitrile. We attribute this behavior to solvent–solvent interactions that lead to a deviation from ideal solution behavior. Coulombic efficiencies ≥90% are maintained in MeCN–PC mixtures over 20 charge/discharge cycles, greater than the efficiencies that are obtained for individual solvents. The results provide insight into the role of solvent in improving the rate of charge transfer and paves a way to systematically tune solvent composition to yield faster electron transfer kinetics.more » « less
-
All-climate temperature operation capability and increased energy density have been recognized as two crucial targets, but they are rarely achieved together in rechargeable lithium (Li) batteries. Herein, we demonstrate an electrolyte system by using monodentate dibutyl ether with both low melting and high boiling points as the sole solvent. Its weak solvation endows an aggregate solvation structure and low solubility toward polysulfide species in a relatively low electrolyte concentration (2 mol L −1 ). These features were found to be vital in avoiding dendrite growth and enabling Li metal Coulombic efficiencies of 99.0%, 98.2%, and 98.7% at 23 °C, −40 °C, and 50 °C, respectively. Pouch cells employing thin Li metal (50 μm) and high-loading sulfurized polyacrylonitrile (3.3 mAh cm −2 ) cathodes (negative-to-positive capacity ratio = 2) output 87.5% and 115.9% of their room temperature capacity at −40 °C and 50 °C, respectively. This work provides solvent-based design criteria for a wide temperature range Li-sulfur pouch cells.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3390/app132111962
