skip to main content


Title: Data-driven prediction of temperature variations in an open cathode proton exchange membrane fuel cell stack using Koopman operator
In this study, a novel application of the Koopman operator for control-oriented modeling of proton exchange membrane fuel cell (PEMFC)stacks is proposed. The primary contributions of this paper are: (1) the design of Koopman-based models for a fuel cell stack, incorporating K-fold cross-validation, varying lifted dimensions, radial basis functions (RBFs), and prediction horizons; and (2) comparison of the performance of Koopman based approach with a more traditional physics-based model. The results demonstrate the high accuracy of the Koopman-based model in predicting fuel cell stack behavior, with an error of less than 3%. The proposed approach offers several advantages, including enhanced computational efficiency, reduced computational burden, and improved interpretability. This study demonstrates the suitability of the Koopman operator for the modeling and control of PEMFCs and provides valuable insights into a novel control-oriented modeling approach that enables accurate and efficient predictions for fuel cell stacks.  more » « less
Award ID(s):
2135735
NSF-PAR ID:
10479129
Author(s) / Creator(s):
;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Energy and AI
Volume:
14
Issue:
C
ISSN:
2666-5468
Page Range / eLocation ID:
100289
Subject(s) / Keyword(s):
Proton exchange membrane fuel cell (PEMFC) Data-driven modeling Koopman operator Dynamic modeling Control-oriented modeling Physics-based modeling
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. open-cathode proton exchange membrane ; data-driven modeling ; Koopman operator ; physics-based modeling ; control-oriented modeling (Ed.)
    Accurate modeling is crucial for the effective design and control of fuel cell stacks. Although physics-based models are widely used, data-driven methods such as the Koopman operator have not been fully explored for fuel cell modeling. In this paper, a Koopman-based approach is utilized to model the thermal dynamics of a 5 kW open cathode proton exchange membrane fuel cell stack. A physics-based model is used as the baseline for comparison. By varying the cooling fan rotational speed, the dynamics of the fuel cell stack were measured from the low load of near 0 kW to about 5 kW. Compared to experimental results, the steady-state absolute errors of Koopman-based models are within 3%. Additionally, once given sufficient dimension, the development effort required for the Koopman-based model is relatively low compared to the traditional physics-based approach, while still achieving a high level of accuracy. These findings suggest the Koopman operator may be a suitable alternative approach for fuel cell stack modeling that enables the development of more accurate and efficient modeling methods for fuel cell systems and facilitates the implementation of the linear optimal algorithms. 
    more » « less
  2. This study presents a novel approach to optimal control utilizing a Koopman operator integrated with a linear quadratic regulator (LQR) to enhance the thermal management and power output efficiency of an open-cathode proton exchange membrane fuel cell (PEMFC) stack. First, a linear time-invariant dynamic model was derived through Koopman operator to forecast the behavior of the PEMFC stack. Second, this Koopman-based model was directly integrated with LQR for optimizing temperature, temperature variations, and output power efficiency of the PEMFC stack by regulating fan speed, with a physics-based model serving as the plant model. Finally, the performance of the Koopman-based LQRs (KLQR) was compared to a baseline proportional-integral (PI) controller across various ambient temperatures and operating conditions, focusing on temperature, temperature variations, and net power output. The results demonstrate the proposed Koopman-based approach can be seamless integration with linear optimal control algorithms, effectively minimizing temperature, temperature variations across the PEMFC stack, and the net power outputs under different ambient temperature and operating conditions. 
    more » « less
  3. Abstract Purpose of Review

    We review recent advances in algorithmic development and validation for modeling and control of soft robots leveraging the Koopman operator theory.

    Recent Findings

    We identify the following trends in recent research efforts in this area. (1) The design of lifting functions used in the data-driven approximation of the Koopman operator is critical for soft robots. (2) Robustness considerations are emphasized. Works are proposed to reduce the effect of uncertainty and noise during the process of modeling and control. (3) The Koopman operator has been embedded into different model-based control structures to drive the soft robots.

    Summary

    Because of their compliance and nonlinearities, modeling and control of soft robots face key challenges. To resolve these challenges, Koopman operator-based approaches have been proposed, in an effort to express the nonlinear system in a linear manner. The Koopman operator enables global linearization to reduce nonlinearities and/or serves as model constraints in model-based control algorithms for soft robots. Various implementations in soft robotic systems are illustrated and summarized in the review.

     
    more » « less
  4. Proton exchange membrane (PEM) fuel cells have emerged as a viable alternative energy production source for stationary and transportation applications. Reliable and sustainable fuel cell operation requires effective water management. Membrane water content can vary along the stack during transients which can lead to losses in fuel cell performance. To control these variations, a model that predicts the internal humidity dynamics of the stack is needed. In this study, a control-oriented model for predicting membrane water content variation was developed and implemented in MATLAB/Simulink. A lumped parameter model was initially developed and then further discretized into smaller control volumes to track humidity distribution along the stack. To validate the model’s predictions, the predicted results were compared to computer simulation results from GT-Suite. The root mean square error (RMSE) between the model’s prediction and GT-Suite’s simulation results was found to be within 1.5 membrane water content for all cases, demonstrating the model’s capability to capture the variation in membrane water content along the stack. The developed model will be useful for real-time control of membrane water content distribution in PEM fuel cells. 
    more » « less
  5. This paper presents a data-driven methodology for linear embedding of nonlinear systems. Utilizing structural knowledge of general nonlinear dynamics, the authors exploit the Koopman operator to develop a systematic, data-driven approach for constructing a linear representation in terms of higher order derivatives of the underlying nonlinear dynamics. With the linear representation, the nonlinear system is then controlled with an LQR feedback policy, the gains of which need to be calculated only once. As a result, the approach enables fast control synthesis. We demonstrate the efficacy of the approach with simulations and experimental results on the modeling and control of a tail-actuated robotic fish and show that the proposed policy is comparable to backstepping control. To the best of our knowledge, this is the first experimental validation of Koopman-based LQR control. 
    more » « less