An official website of the United States government
Bioinspired mechanical mineralization of organogels
Abstract Mineralization is a long-lasting method commonly used by biological materials to selectively strengthen in response to site specific mechanical stress. Achieving a similar form of toughening in synthetic polymer composites remains challenging. In previous work, we developed methods to promote chemical reactions via the piezoelectrochemical effect with mechanical responses of inorganic, ZnO nanoparticles. Herein, we report a distinct example of a mechanically-mediated reaction in which the spherical ZnO nanoparticles react themselves leading to the formation of microrods composed of a Zn/S mineral inside an organogel. The microrods can be used to selectively create mineral deposits within the material resulting in the strengthening of the overall resulting composite.
more »
« less
- Award ID(s):
- 2011854
- PAR ID:
- 10479751
- Publisher / Repository:
- Nature Publishing Group
- Date Published:
- Journal Name:
- Nature Communications
- Volume:
- 14
- Issue:
- 1
- ISSN:
- 2041-1723
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
Iron doped ZnO (Fe-ZnO) nanoparticles were synthesized using two techniques that are economical as well as scalable to yield tunable properties of nanoparticles for facilitating down conversion in an absorbing layer of a solar cell. To evaluate the suitability of Fe-ZnO nanoparticles prepared by two deposition methods, we present a comparison of optical, electrical, and structural properties of Fe-ZnO using several experimental techniques. Structural properties were analyzed using transmission electron microscopy and x-ray diffraction spectroscopy (XRD) with Rietveld analysis for extracting information on compositional variations with Fe doping. The chemical composition of nanoparticles was analyzed through X-ray photoelectron spectroscopy (XPS). The optical properties of nanoparticles were studied using photoluminescence and UV-Vis absorption spectroscopy. In addition, fluorescence lifetime measurement was also performed to study the changes in an exponential decay of lifetimes. The electrical transport properties of Fe-ZnO were analyzed by impedance spectroscopy. Our studies indicate that ethanol as a solvent in a microwave method would produce smaller nanoparticles up to the size of 11 nm. In contrast, the precipitation method produces secondary phases of Fe2O3 beyond 5% doping. In addition, our studies show that the optical and electrical properties of resulting Fe-ZnO nanoparticles depend on the particle sizes and the synthesis techniques used. These new results provide insight into the role of solvents in fabricating Fe-ZnO nanoparticles by precipitation and microwave methods for photovoltaic and other applications.more » « less
-
ABSTRACT This study investigates the morphological, thermal, mechanical, and bioactive properties of centrifugally spun fibrous composites made from poly(D,L‐lactide)/poly(3‐hydroxybutyrate) (PLA/PHB) blends with zinc oxide (ZnO) and hydroxyapatite (Hap) nanoparticles. A 75/25 PLA/PHB weight ratio was chosen to balance mechanical and thermal properties. The precursor solution viscosities ranged from 0.25 to 0.50 Pa s, increasing with nanoparticle incorporation probably due to polymer‐nanoparticle interactions. SEM revealed a uniform fibrous morphology, with diameters of 1.21 for PLA/PHB, 2.65 for PLA/ZnO/Hap, and 1.80 μm for PLA/PHB/ZnO/Hap. TGA showed two‐step degradation for PLA/PHB fibers, while PLA/PHB/ZnO/Hap degraded in a single step at 249°C, leaving a residue of 9.95%. DSC indicated partial miscibility, with cold crystallization at 85°C (enthalpy: 7.72 J/g), slightly modified by nanoparticle addition. PLA/PHB fibers achieved a Young's modulus of 24.96 ± 3.91 MPa, three times that of pure PLA, but adding ZnO and Hap reduced modulus and tensile strength to 6.03 and 0.29 MPa, retaining suitability for biomedical applications. PLA/PHB/ZnO/Hap fibers exhibited 90%Escherichia coligrowth inhibition and enhanced MC3T3‐E1 cell viability by 120% on day 7. These results highlight their potential for antimicrobial, biocompatible medical devices.more » « less
-
null (Ed.)Abstract This paper presents research results of biocidal effect of thermoplastic- polyester-elastomer (TPE-E) with incorporation of hybrid Ag/ZnO/SiO 2 NPs (silver/Zinc oxide/SiO 2 nanoparticles). These results were compared with various gamma-irradiated doses and processing techniques including extrusion, injection molding and compression molding. In all these processing techniques the TPE-E was mixed with mineral oil and Ag/ZnO/SiO 2 nanoparticles. The TPE-E nanocomposites were characterized by differential scanning calorimetry (DSC), thermogravimetry analysis (TGA), Infrared FT spectroscopy (FTIR), surface enhanced Raman technique ( SERS), FESEM (Field emission scanning electron microscopy), Energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), TEM (transmission electronic microscopy) and antimicrobial test. Antibacterial activity against E. coli and S. aureus , are reported and these results showed potential application in health care products.more » « less
-
Abstract Zinc oxide nanoparticles (ZnO NPs) are versatile and promising, with diverse applications in environmental remediation, nanomedicine, cancer treatment, and drug delivery. In this study, ZnO NPs were synthesized utilizing extracts derived fromAcacia catechu, Artemisia vulgaris, andCynodon dactylon. The synthesized ZnO NPs showed an Ultraviolet–visible spectrum at 370 nm, and X-ray diffraction analysis indicated the hexagonal wurtzite framework with the average crystallite size of 15.07 nm, 16.98 nm, and 18.97 nm for nanoparticles synthesized utilizingA. catechu, A. vulgaris,andC. dactylonrespectively. Scanning electron microscopy (SEM) demonstrated spherical surface morphology with average diameters of 18.5 nm, 17.82 nm, and 17.83 nm for ZnO NPs prepared fromA. catechu, A. vulgaris, andC. dactylon,respectively. Furthermore, ZnO NPs tested againstStaphylococcus aureus, Kocuria rhizophila, Klebsiella pneumonia,andShigella sonneidemonstrated a zone of inhibition of 8 to 14 mm. The cell viability and cytotoxicity effects of ZnO NPs were studied on NIH-3T3 mouse fibroblast cells treated with different concentrations (5 μg/mL, 10 μg/mL, and 50 μg/mL). The results showed biocompatibility of all samples, except with higher doses causing cell death. In conclusion, the ZnO NPs synthesized through plant-mediated technique showed promise for potential utilization in various biomedical applications in the future.more » « less
