An official website of the United States government
Tertiary phosphines are ubiquitous in inorganic chemistry. They play important roles as ligands in coordination chemistry and catalysis. Furthermore, they act as surface acidity probes for oxide surfaces. However, only volatile phosphines, such as PH3 have been applied in this function so far. Here we demonstrate for the first time that the triaryl- and trialkylphosphines PPh3 and PCy3 with high melting points self-adsorb readily onto a silica surface even in the absence of a solvent. The self-adsorption takes place within days when both solid components are mixed and then left undisturbed. The phosphines form well-defined monolayers on the surface and the transition from monolayer to left-over polycrystalline phosphine is abrupt. Therefore, the maximal surface coverage with a monolayer can be easily determined. When the phosphines are adsorbed from solutions, the same maximal surface coverage is found. Solid-state NMR spectroscopy provides a unique analytical tool for studying the structure and dynamics of phosphines in different environments. 31P and 2H solid-state NMR measurements are successfully applied for characterizing the adsorption process and the mobilities of the adsorbed phosphines across the silica surface. Furthermore, using (Ph3P)2Ni(CO)2 as a representative, it is demonstrated that the silica surface has a hitherto unrecognized impact on immobilized and surface-residing catalysts because it competes for phosphine ligands coordinated to a metal center. This competition manifests as one more factor leading to the loss of phosphine ligands and ultimately leaching of immobilized metal complexes or nanoparticle formation. Besides the increase of fundamental knowledge about adsorption processes, the presented results have implications for chromatographic separations of metal complexes and for the lifetime of immobilized and other types of surface-residing catalysts.
more »
« less
Creating Well-Defined monolayers of phosphine linkers incorporating ethoxysilyl groups on silica surfaces for superior immobilized catalysts
Many applications of catalysts immobilized on solid supports like silica via bifunctional phosphine linkers are still hampered by their decomposition, leaching, agglomeration, and uncontrolled nanoparticle formation, all of which change their activities and selectivities. In general, the success of an immobilized catalyst is crucially dependent on the linker and its attachment to the oxide support. In this contribution, an improved method for covalently binding phosphine linkers to silica via ethoxysilane groups is described. This method leads to well-defined sub-monolayers of linkers on silica surfaces without cross-linking of the linkers, which typically leads to clogged pores and metal agglomeration during catalysis, thus entailing less active and selective catalysts. The novel immobilization method has been supported by multinuclear classical CP/MAS solid-state NMR spectroscopy, as well as suspension NMR of slurries. It has been demonstrated by TEM that nickel complexes coordinated by immobilized phosphine linkers in a well-defined sub-monolayer coverage do not form larger aggregates or nanoparticles during the catalytic cyclotrimerization of phenylacetylene under various conditions, in contrast to analogous complexes in homogeneous catalytic runs.
more »
« less
- Award ID(s):
- 1900100
- PAR ID:
- 10480136
- Publisher / Repository:
- Elsevier
- Date Published:
- Journal Name:
- Applied Surface Science
- Volume:
- 615
- Issue:
- C
- ISSN:
- 0169-4332
- Page Range / eLocation ID:
- 156380
- Subject(s) / Keyword(s):
- Phosphine Linkers ethoxysilane groups covalent binding to silica solid-state NMR immobilized nickel catalysts
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Oxidations represent important reactions that are ubiquitous in academia and industry. Hydrogen peroxide (H2O2) is a common source of active oxygen for oxidations. H2O2 is usually diluted in water as it is too unstable to be used in pure form. However, the presence of water can complicate reactions because biphasic mixtures with organic solvents form. Furthermore, secondary reactions with water may lead to side products. Therefore, alternative forms of H2O2, such as peroxide adducts, are an active area of research. Di(hydroperoxy)alkane adducts of phosphine oxides are one attractive solution because they are soluble in organic solvents, crystallizable, shelf-stable and active towards a variety of oxidation reactions. The only drawback is that the phosphine oxide carrier has to be removed after the reaction. In this contribution, the bifunctional ligand (EtO)3Si(CH2)2PPh2 is immobilized on a silica (SiO2) support which is subsequently end-capped with EtOSi(CH3)3. The new surface-bound di(hydroperoxy)propane adduct is then generated with the immobilized phosphine oxide as carrier. The adduct and a deuterated analog are characterized with solid-state and solution NMR spectroscopy. It has been demonstrated that substrates in organic solvents easily access the surface-bound peroxide and are oxidized quantitatively. The phosphine oxide carrier remains bound to the surface and can be removed easily by settling of the silica. Using the oxidative esterification of nonyl aldehyde it is proven that the immobilized peroxide adduct does not leach from the silica support and is active and reusable over multiple cycles.more » « less
-
Catalytically active asymmetric membranes were developed by crosslinking a polydimethylsiloxane (PDMS) thin layer onto a porous polyamide‐imide hollow fiber (PAIHF) support, followed by grafting of aminosilane with hydroxyl derived-PDMS/PAIHF, and finally palladium nanoparticles (PdNPs) immobilization using salicylic aldehyde. Aminosilane and salicylic aldehyde linkers were used to permanently immobilize PdNPs onto the PDMS surface through metal coordination chelation, which prevented their agglomeration and leaching from the catalytic membrane reactor (CMR) module. The obtained CMRs were used as a heterogeneous catalyst and continuous-flow membrane reactor for hydrogenation of 4-nitrophenol, aldol and nitroaldol condensation, Heck coupling, CO2 cycloaddition and hydroxyalkylation of aniline, and tandem reactions of glucose and fructose to 5-hydroxymethylfurfural (HMF). Our findings also revealed that the turnover frequency (TOF) and selectivity can be tuned and controlled by adjusting the chemistry and degree of cross-linkers, reaction solvents, and flow rates. Even though our polymeric hollow fiber microreactors showed relatively good performance at temperatures up to 150 °C, some amount of active spices (e.g., Pd nanoparticles) leached out from the microreactor due to polymer swelling, plasticization, and pore shrinkage during flow reaction, especially when exposed to polar aprotic solvents and aromatics, and deteriorated the stability of the immobilized catalysts.more » « less
-
Metal-Organic Frameworks (MOFs) are the subject of intense research focus due to their potential applications in gas storage and separation, biomedicine, energy, and catalysis. Recently, low-valent MOFs (LVMOFs) have been explored for their potential use as heterogeneous catalysts, and multitopic phosphine linkers have been shown as a useful building block for the formation of LVMOFs. However, the synthesis of LVMOFs using phosphine linkers requires conditions that are distinct from the majority of the MOF synthetic literature, including the exclusion of air and water and the use of unconventional modulators and solvents, making it somewhat more challenging to access these materials. This work serves as a general tutorial for the synthesis of LVMOFs with phosphine linkers, including information on: 1) judicious choice of metal precursor, modulator, and solvent; 2) experimental procedures, air-free techniques, and required equipment; 3) proper storage and handling of the resultant LVMOFs; and 4) useful characterization methods for these materials. The intention of this report is to lower the barrier and make more accessible this new subfield of MOF research and facilitate advancements toward novel catalytic materials.more » « less
-
Warren Piers (Ed.)Although cobalt( i ) bis-phosphine complexes have been implicated in many selective C–C bond-forming reactions, until recently relatively few of these compounds have been fully characterized or have been shown to be intermediates in catalytic reactions. In this paper we present a new practical method for the synthesis and isolation of several cobalt( i )-bis-phosphine complexes and their use in Co( i )-catalyzed reactions. We find that easily prepared ( in situ generated or isolated) bis-phosphine and (2,6- N -aryliminoethyl)pyridine (PDI) cobalt( ii ) halide complexes are readily reduced by 1,4-bis-trimethylsilyl-1,4-dihydropyrazine or commercially available lithium nitride (Li 3 N), leaving behind only innocuous volatile byproducts. Depending on the structures of the bis-phosphines, the cobalt( i ) complex crystallizes as a phosphine-bridged species [(P∼P)(X)Co I [μ-(P∼P)]Co I (X)(P∼P)] or a halide-bridged species [(P∼P)Co I [μ-(X)] 2 Co I (P∼P)]. Because the side-products are innocuous, these methods can be used for the in situ generation of catalytically competent Co( i ) complexes for a variety of low-valent cobalt-catalyzed reactions of even sensitive substrates. These complexes are also useful for the synthesis of rare cationic [(P∼P)Co I -η 4 -diene] + X − or [(P∼P)Co I -η 6 -arene] + X − complexes, which are shown to be excellent single-component catalysts for the following regioselective reactions of dienes: heterodimerizations with ethylene or methyl acrylate, hydroacylation and hydroboration. The reactivity of the single-component catalysts with the in situ generated species are also documented.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.apsusc.2023.156380
