skip to main content


Title: Intensive aerosol properties of boreal and regional biomass burning aerosol at Mt. Bachelor Observatory: larger and black carbon (BC)-dominant particles transported from Siberian wildfires

Abstract. We characterize the aerosol physical and optical properties of 13 transported biomass burning (BB) events. BB events included long-rangeinfluence from fires in Alaskan and Siberian boreal forests transported to Mt. Bachelor Observatory (MBO) in the free troposphere (FT) over 8–14+ d and regional wildfires in northern California and southwestern Oregon transported to MBO in the boundary layer (BL) over 10 h to 3 d. Intensive aerosol optical properties and normalized enhancement ratios for BB events were derived from measured aerosol light scattering coefficients (σscat), aerosol light-absorbing coefficients (σabs), fine particulate matter (PM1), and carbon monoxide (CO) measurements made from July to September 2019, with particle size distribution collected from August to September. The observations showed that the Siberian BB events had a lower scattering Ångström exponent (SAE), a higher mass scattering efficiency (MSE; Δσscat/ΔPM1), and a bimodal aerosol size distribution with a higher geometric mean diameter (Dg). We hypothesize that the larger particles and associated scatteringproperties were due to the transport of fine dust alongside smoke in addition to contributions from condensation of secondary aerosol, coagulation of smaller particles, and aqueous-phase processing duringtransport. Alaskan and Siberian boreal forest BB plumes were transported long distances in the FT and characterized by lower absorptionÅngström exponent (AAE) values indicative of black carbon (BC)dominance in the radiative budget. Significantly elevated AAE values wereonly observed for BB events with <1 d transport, which suggests strong production of brown carbon (BrC) in these plumes but limited radiative forcing impacts outside of the immediate region.

 
more » « less
Award ID(s):
1829893
NSF-PAR ID:
10482422
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Atmospheric Chemistry and Physics
Date Published:
Journal Name:
Atmospheric Chemistry and Physics
Volume:
23
Issue:
4
ISSN:
1680-7324
Page Range / eLocation ID:
2747 to 2764
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. The month of August 2015 featured extensive wildfires in the Northwestern U.S. and no significant fires in Alaska and Canada. With the majority of carbonaceous aerosols (CA), including black carbon (BC) and brown carbon (BrC), over the U.S. dominated by emissions from Northwestern wildfires, this month presented a unique opportunity for testing wildfire BrC representation in the Weather Research and Forecasting model with chemistry (WRF-Chem). We performed parallel simulations that (1) did not account for BrC absorption, (2) accounted for BrC absorption, and (3) accounted for BrC absorption as well as its decay due to photobleaching. We used a comprehensive set of extensive and pseudo-intensive optical properties, namely the aerosol optical depth (AOD), aerosol absorption optical depth (AAOD), absorption Ångström exponent (AAE), and single scattering albedo (SSA) to constrain the model output against observations from the Aerosol Robotic Network (AERONET). We found that accounting for BrC absorption and photobleaching resulted in the best agreement with observations in terms of aerosol absorption (AAOD and AAE). However, the model severely underestimated AOD and SSA compared to observations. We attributed this discrepancy to missing scattering due to missing secondary organic aerosol (SOA) formation from wildfire emissions in the model. To test this hypothesis, we applied a zeroth-order representation of wildfire SOA, which significantly improved the AOD and SSA model-observation comparison. Our findings indicate that BrC absorption, the decay of its absorption due to photobleaching, as well as SOA formation should be accounted for in chemical transport models in order to accurately represent CA emissions from wildfires. 
    more » « less
  2. Abstract

    Evaluating our understanding of smoke from wild and prescribed fires can benefit from downwind measurements that include inert tracers to test production and transport and reactive species to test chemical mechanisms. We characterized smoke from fires in coniferous forest fuels for >1,000 hr over two summers (2017 and 2018) at our Missoula, Montana, surface station and found a narrow range for key properties. ΔPM2.5/ΔCO was 0.1070 ± 0.0278 (g/g) or about half the age‐independent ratios obtained at free troposphere elevations (0.2348 ± 0.0326). The average absorption Ångström exponent across both years was 1.84 ± 0.18, or about half the values available for very fresh smoke. Brown carbon (BrC) was persistent (~50% of absorption at 401 nm) in both years, despite differences in smoke age. ΔBC/ΔCO doubled from 2017 to 2018, but the average across 2 years was within 33% of recent airborne measurements, suggesting low sampling bias among platforms. Switching from a 1.0 to a 2.5 micron cutoff increased the mass scattering and mass absorption coefficients, suggesting often overlooked supermicron particles impact the optical properties of moderately aged smoke. O3was elevated ~6 ppb on average over a full diurnal period when wildfire smoke was present, and smoke‐associated O3increases were highest (~9 pbb) at night, suggesting substantial upwind production. NOxwas mostly local in origin. NOxspurred high rates of NO3production, including in the presence of wildfire smoke (up to 2.44 ppb hr−1) and at least one nighttime BrC secondary formation event that could have impacted next‐day photochemistry.

     
    more » « less
  3. Abstract. Even though the Arctic is remote, aerosol properties observed there arestrongly influenced by anthropogenic emissions from outside the Arctic. Thisis particularly true for the so-called Arctic haze season (January throughApril). In summer (June through September), when atmospheric transportpatterns change, and precipitation is more frequent, local Arctic sources,i.e., natural sources of aerosols and precursors, play an important role.Over the last few decades, significant reductions in anthropogenic emissionshave taken place. At the same time a large body of literature shows evidencethat the Arctic is undergoing fundamental environmental changes due toclimate forcing, leading to enhanced emissions by natural processes that mayimpact aerosol properties. In this study, we analyze 9 aerosol chemical species and 4 particleoptical properties from 10 Arctic observatories (Alert, Kevo, Pallas,Summit, Thule, Tiksi, Barrow/Utqiaġvik, Villum, and Gruvebadet and ZeppelinObservatory – both at Ny-Ålesund Research Station) to understand changesin anthropogenic and natural aerosol contributions. Variables includeequivalent black carbon, particulate sulfate, nitrate, ammonium,methanesulfonic acid, sodium, iron, calcium and potassium, as well asscattering and absorption coefficients, single scattering albedo andscattering Ångström exponent. First, annual cycles are investigated, which despite anthropogenic emissionreductions still show the Arctic haze phenomenon. Second, long-term trendsare studied using the Mann–Kendall Theil–Sen slope method. We find in total41 significant trends over full station records, i.e., spanning more than adecade, compared to 26 significant decadal trends. The majority ofsignificantly declining trends is from anthropogenic tracers and occurredduring the haze period, driven by emission changes between 1990 and 2000.For the summer period, no uniform picture of trends has emerged. Twenty-sixpercent of trends, i.e., 19 out of 73, are significant, and of those 5 arepositive and 14 are negative. Negative trends include not only anthropogenictracers such as equivalent black carbon at Kevo, but also natural indicatorssuch as methanesulfonic acid and non-sea-salt calcium at Alert. Positivetrends are observed for sulfate at Gruvebadet. No clear evidence of a significant change in the natural aerosolcontribution can be observed yet. However, testing the sensitivity of theMann–Kendall Theil–Sen method, we find that monotonic changes of around 5 % yr−1 in an aerosol property are needed to detect a significanttrend within one decade. This highlights that long-term efforts well beyonda decade are needed to capture smaller changes. It is particularly importantto understand the ongoing natural changes in the Arctic, where interannualvariability can be high, such as with forest fire emissions and theirinfluence on the aerosol population. To investigate the climate-change-induced influence on the aerosolpopulation and the resulting climate feedback, long-term observations oftracers more specific to natural sources are needed, as well as of particlemicrophysical properties such as size distributions, which can be used toidentify changes in particle populations which are not well captured bymass-oriented methods such as bulk chemical composition. 
    more » « less
  4. Abstract. Measurement of light absorption of solar radiation byaerosols is vital for assessing direct aerosol radiative forcing, whichaffects local and global climate. Low-cost and easy-to-operate filter-basedinstruments, such as the Particle Soot Absorption Photometer (PSAP), that collect aerosols on a filter and measure light attenuation through thefilter are widely used to infer aerosol light absorption. However,filter-based absorption measurements are subject to artifacts that aredifficult to quantify. These artifacts are associated with the presence ofthe filter medium and the complex interactions between the filter fibers and accumulated aerosols. Various correction algorithms have been introduced to correct for the filter-based absorption coefficient measurements toward predicting the particle-phase absorption coefficient (Babs). However, the inability of these algorithms to incorporate into their formulations the complex matrix of influencing parameters such as particle asymmetry parameter, particle size, and particle penetration depth results in prediction of particle-phase absorption coefficients with relatively low accuracy. The analytical forms of corrections also suffer from a lack of universal applicability: different corrections are required for rural andurban sites across the world. In this study, we analyzed and compared 3 months of high-time-resolution ambient aerosol absorption data collectedsynchronously using a three-wavelength photoacoustic absorption spectrometer (PASS) and PSAP. Both instruments were operated on the same sampling inletat the Department of Energy's Atmospheric Radiation Measurement program's Southern Great Plains (SGP) user facility in Oklahoma. We implemented the two mostcommonly used analytical correction algorithms, namely, Virkkula (2010) and the average of Virkkula (2010) and Ogren (2010)–Bond et al. (1999) as well as a random forest regression (RFR) machine learning algorithm to predict Babs values from the PSAP's filter-based measurements. The predicted Babs was compared against the reference Babs measured by the PASS. The RFR algorithm performed the best by yielding the lowest root mean squareerror of prediction. The algorithm was trained using input datasets from the PSAP (transmission and uncorrected absorption coefficient), a co-locatednephelometer (scattering coefficients), and the Aerosol Chemical Speciation Monitor (mass concentration of non-refractory aerosol particles). A revisedform of the Virkkula (2010) algorithm suitable for the SGP site has beenproposed; however, its performance yields approximately 2-fold errors when compared to the RFR algorithm. To generalize the accuracy and applicabilityof our proposed RFR algorithm, we trained and tested it on a dataset oflaboratory measurements of combustion aerosols. Input variables to thealgorithm included the aerosol number size distribution from the Scanning Mobility Particle Sizer, absorption coefficients from the filter-basedTricolor Absorption Photometer, and scattering coefficients from amultiwavelength nephelometer. The RFR algorithm predicted Babs values within 5 % of the reference Babs measured by the multiwavelength PASS during the laboratory experiments. Thus, we show that machine learningapproaches offer a promising path to correct for biases in long-termfilter-based absorption datasets and accurately quantify their variabilityand trends needed for robust radiative forcing determination. 
    more » « less
  5. Abstract

    During the summer of 2018, the upward-pointing Wyoming Cloud Lidar (WCL) was deployed on board the University of Wyoming King Air (UWKA) research aircraft for the Biomass Burning Flux Measurements of Trace Gases and Aerosols (BB-FLUX) field campaign. This paper describes the generation of calibrated attenuated backscatter coefficients and aerosol extinction coefficients from the WCL measurements. The retrieved aerosol extinction coefficients at the flight level strongly correlate (correlation coefficient, rr > 0.8) with in situ aerosol concentration and carbon monoxide (CO) concentration, providing a first-order estimate for converting WCL extinction coefficients into vertically resolved CO and aerosol concentration within wildfire smoke plumes. The integrated CO column concentrations from the WCL data in nonextinguished profiles also correlate (rr = 0.7) with column measurements by the University of Colorado Airborne Solar Occultation Flux instrument, indicating the validity of WCL-derived extinction coefficients. During BB-FLUX, the UWKA sampled smoke plumes from more than 20 wildfires during 35 flights over the western United States. Seventy percent of flight time was spent below 3 km above ground level (AGL) altitude, although the UWKA ascended up to 6 km AGL to sample the top of some deep smoke plumes. The upward-pointing WCL observed a nearly equal amount of thin and dense smoke below 2 km and above 5 km due to the flight purpose of targeted fresh fire smoke. Between 2 and 5 km, where most of the wildfire smoke resided, the WCL observed slightly more thin smoke than dense smoke due to smoke spreading. Extinction coefficients in dense smoke were 2–10 times stronger, and dense smoke tended to have larger depolarization ratio, associated with irregular aerosol particles.

     
    more » « less