An official website of the United States government
Metasurfaces exhibiting spatially asymmetric inner structures have been shown to host unidirectional scattering effects, benefiting areas where directional control of waves is desired. In this work, we propose a non-Hermitian planar elastic metasurface to achieve unidirectional focusing of flexural waves. The unit cells are constructed by piezoelectric disks and metallic blocks that are asymmetrically loaded. A tunable material loss is then introduced by negative capacitance shunting. By suitably engineering the induced loss profile, a series of unit cells are designed, which can individually access the exceptional points manifested by unidirectional zero reflection. We then construct a planar metasurface by tuning the reflected phase to ensure constructive interference at one side of the metasurface. Unidirectional focusing of the incident waves is demonstrated, where the reflected wave energy is focused from one direction, and zero reflection is observed in the other direction. The proposed metasurface enriches the flexibility in asymmetric elastic wave manipulation as the loss and the reflected phase can be tailored independently in each unit cell.
more »
« less
Tunable elastic wave modulation via local phase dispersion measurements of a piezoelectric metasurface with signal correlation enhancement
Tunable piezoelectric metasurfaces have been proposed as a means of adaptively steering incident elastic waves for various applications in vibration mitigation and control. Bonding piezoelectric material to thin structures introduces electromechanical coupling, enabling structural dynamics to be altered via tunable electric shunts connected across each unit cell. For example, by carefully calibrating the inductive shunts, it is possible to implement the discrete phase shifts necessary for gradient-based waveguiding behaviors. However, experimental validations of localized phase shifting are challenging due to the narrow bandgap of local resonators, resulting in poor transmission of incident waves and high sensitivity to transient noise. These factors, in combination with the difficulties in experimental circuitry synthesis, can lead to significant variability of data acquired within the bandgap operating region. This paper presents a systematic approach for extracting localized phase shifts by taking advantage of the inherent correlation between the incident and transmitted wavefronts. During this procedure, matched filtering greatly reduces noise in the transmitted signal when operating in or near bandgap frequencies. Experimental results demonstrate phase shifts as large as −170° within the locally resonant bandgap, with an average 28% reduction in error relative to a direct time domain measurement of phase, enabling effective comparison of the dispersive behavior with corresponding analytical and finite element models. In addition to demonstrating the tunable waveguide characteristics of a piezoelectric metasurface, this technique can easily be extended to validate localized phase shifting of other elastic waveguiding metasurfaces.
more »
« less
- Award ID(s):
- 1825324
- PAR ID:
- 10482730
- Publisher / Repository:
- AIP Publishing
- Date Published:
- Journal Name:
- Journal of Applied Physics
- Volume:
- 133
- Issue:
- 24
- ISSN:
- 0021-8979
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Abstract Controlling and manipulating elastic/acoustic waves via artificially structured metamaterials, phononic crystals, and metasurfaces have gained an increasing research interest in the last decades. Unlike others, a metasurface is a single layer in the host medium with an array of subwavelength-scaled patterns introducing an abrupt phase shift in the wave propagation path. In this study, an elastic metasurface composed of an array of slender beam resonators is proposed to control the elastic wavefront of low-frequency flexural waves. The phase gradient based on Snell’s law is achieved by tailoring the thickness of thin beam resonators connecting two elastic host media. Through analytical and numerical models, the phase-modulated metasurfaces are designed and verified to accomplish three dynamic wave functions, namely, deflection, non-paraxial propagation, and focusing. An oblique incident wave is also demonstrated to show the versatility of the proposed design for focusing of wave energy incident from multiple directions. Experimentally measured focusing metasurface has nearly three times wave amplification at the designed focal point which validates the design and theoretical models. Furthermore, the focusing metasurface is exploited for low-frequency energy harvesting and the piezoelectric harvester is improved by almost nine times in terms of the harvested power output as compared to the baseline harvester on the pure plate without metasurface.more » « less
-
Abstract In this paper, we design a tunable phase-modulated metasurface composed of periodically distributed piezoelectric patches with resonant-type shunt circuits. The electroelastic metasurface can control the wavefront of the lowest antisymmetric mode Lamb wave (A0mode) in a small footprint due to its subwavelength features. The fully coupled electromechanical model is established to study the transmission characteristics of the metasurface unit and validated through numerical and experimental studies. Based on the analysis of the metasurface unit, we first explore the performance of electroelastic metasurface with single-resonant shunts and then extend its capability with multi-resonant shunts. By only tuning the electric loads in the shunt circuits, we utilize the proposed metasurface to accomplish wave deflection and wave focusing ofA0mode Lamb waves at different angles and focal points, respectively. Numerical simulations show that the metasurface with single-resonant shunts can deflect the wavefront of 5 kHz and 6 kHz flexural waves by desired angles with less than deviation. In addition, it can be tuned to achieve nearly three times displacement amplification at the designed focal point for a wide range of angles from to 75∘. Furthermore, with multi-resonant shunts, the piezoelectric-based metasurface can accomplish anomalous wave control over flexural waves at multiple frequencies (i.e. simultaneously at 5 kHz and 10 kHz), developing new potentials toward a broad range of engineering applications such as demultiplexing various frequency components or guiding and focusing them at different positions.more » « less
-
Abstract The development of new optical materials and metamaterials has seen a natural progression toward both nanoscale geometries and dynamic performance. The development of these materials, such as optical metasurfaces which impart discrete, spatially dependent phase shifts on incident light, often benefits from the measurement of transmitted or reflected phase. Careful measurement of phase typically proves difficult to implement, due to high measurement sensitivity to practically unavoidable environmental sources of noise and drift. To date, no characterization technique has yet emerged as a frontrunner for these applications. This challenge is addressed using a custom‐designed three‐beam Mach–Zehnder interferometer capable of continuously referenced measurement of both phase and transmittance, resulting in a 10× reduction of noise and drift and phase measurement standard deviation over 10 min of 0.56° and over 16 h of 2.8°. High measurement stability provided by this method enables samples to be easily characterized under dynamic conditions. Temperature‐dependent measurements are demonstrated with phase‐change material vanadium dioxide (VO2), and with wavelength‐dependent measurements of a dielectric Huygens metasurface supporting a characteristic resonant reflection peak. A Fourier‐based signal filtering technique is applied, reducing measurement uncertainty to 0.13° and enabling discernment of monolayer thickness variations in 2D material MoS2.more » « less
-
ABSTRACT When arranged in a metasurface, the collective enhancement of field interactions within scattering elements enables precise control over the incident light phase and amplitude. In this work, we analyze collective multipolar resonances in metasurfaces that arise from the spatially extended nature of electromagnetic interactions within these structures, with particular emphasis on MXene metasurfaces. This collective scattering leads to unique and tunable resonance behaviors that reach beyond the simple dipolar approximations, thus enabling advanced manipulation of light at subwavelength scales. We also explore resonances in the scatterers and metasurfaces made of different materials, categorizing them into lossy materials, including transition metal dichalcogenides and conventional metals, and high‐refractive‐index materials, such as silicon. We observe the excitation of MXene multipolar resonances across the visible‐ and infrared‐wavelength spectra and demonstrate their control through the design of scattering elements of the metasurface. We show that periodic lattice arrays support strong localized resonances through the collective response of individual nanoresonators and that one can control multipolar resonances by engineering metasurface nanoresonators and their distribution.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1063/5.0145927
