skip to main content

Explore Research Products in the NSF-PAR

  • NSF Public Access
  • Search Results
  • Design of a Level-3 electric vehicle charging station using a 1-MW solar system via the distributed maximum power point tracking technique

This content will become publicly available on February 1, 2025

Title: Design of a Level-3 electric vehicle charging station using a 1-MW solar system via the distributed maximum power point tracking technique
Abstract

Solar power is mostly influenced by solar irradiation, weather conditions, solar array mismatches and partial shading conditions. Therefore, before installing solar arrays, it is necessary to simulate and determine the possible power generated. Maximum power point tracking is needed in order to make sure that, at any time, the maximum power will be extracted from the photovoltaic system. However, maximum power point tracking is not a suitable solution for mismatches and partial shading conditions. To overcome the drawbacks of maximum power point tracking due to mismatches and shadows, distributed maximum power point tracking is utilized in this paper. The solar farm can be distributed in different ways, including one DC–DC converter per group of modules or per module. In this paper, distributed maximum power point tracking per module is implemented, which has the highest efficiency. This technology is applied to electric vehicles (EVs) that can be charged with a Level 3 charging station in <1 hour. However, the problem is that charging an EV in <1 hour puts a lot of stress on the power grid, and there is not always enough peak power reserve in the existing power grid to charge EVs at that rate. Therefore, a Level 3 (fast DC) EV charging station using a solar farm by implementing distributed maximum power point tracking is utilized to address this issue. Finally, the simulation result is reported using MATLAB®, LTSPICE and the System Advisor Model. Simulation results show that the proposed 1-MW solar system will provide 5 MWh of power each day, which is enough to fully charge ~120 EVs each day. Additionally, the use of the proposed photovoltaic system benefits the environment by removing a huge amount of greenhouse gases and hazardous pollutants. For example, instead of supplying EVs with power from coal-fired power plants, 1989 pounds of CO2 will be eliminated from the air per hour.

  more » « less
Award ID(s):
2115427
NSF-PAR ID:
10484542
Author(s) / Creator(s):
;
Publisher / Repository:
Oxford Academic
Date Published:
Journal Name:
Clean Energy
Volume:
8
Issue:
1
ISSN:
2515-4230
Page Range / eLocation ID:
23 to 35
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ( , 2021 IEEE International Electric Machines & Drives Conference (IEMDC))
    null (Ed.)
    In the last several decades, public interest for electric vehicles (EVs) and research initiatives for smart AC and DC microgrids have increased substantially. Although EVs can yield benefits to their use, they also present new demand and new business models for a changing power grid. Some of the challenges include stochastic demand profiles from EVs, unplanned load growth by rapid EV adoption, and potential frequency (harmonics) and voltage disturbances due to uncoordinated charging. In order to properly account for any of these problems, an accurate and validated model for EV distributions in a power grid must be established. This model (or several models) may then be used for economic and technical analyses. This paper supplies insight into the impact that EVs play in effecting critical loads in a system, and develops a theoretical model to further support a hardware in-the-loop (HIL) real time simulation of modelling and analysis of a distribution feeder with distributed energy resources (DERs) and EVs based on existing data compiled. 
    more » « less
  2. ; ; ; ( , 2021 IEEE International Intelligent Transportation Systems Conference (ITSC))
    Charging infrastructure is the coupling link between power and transportation networks, thus determining charging station siting is necessary for planning of power and transportation systems. While previous works have either optimized for charging station siting given historic travel behavior, or optimized fleet routing and charging given an assumed placement of the stations, this paper introduces a linear program that optimizes for station siting and macroscopic fleet operations in a joint fashion. Given an electricity retail rate and a set of travel demand requests, the optimization minimizes total cost for an autonomous EV fleet comprising of travel costs, station procurement costs, fleet procurement costs, and electricity costs, including demand charges. Specifically, the optimization returns the number of charging plugs for each charging rate (e.g., Level 2, DC fast charging) at each candidate location, as well as the optimal routing and charging of the fleet. From a case-study of an electric vehicle fleet operating in San Francisco, our results show that, albeit with range limitations, small EVs with low procurement costs and high energy efficiencies are the most cost-effective in terms of total ownership costs. Furthermore, the optimal siting of charging stations is more spatially distributed than the current siting of stations, consisting mainly of high-power Level 2 AC stations (16.8 kW) with a small share of DC fast charging stations and no standard 7.7kW Level 2 stations. Optimal siting reduces the total costs, empty vehicle travel, and peak charging load by up to 10%. 
    more » « less
  3. ( , International Journal of Renewable Energy Research)
    null (Ed.)
    Distributed power generation plants with combined photovoltaic (PV) systems and integrated energy storage for grid-connected applications have seen an increase in research interest in recent years. However, the combination of multiple energy sources requires numerous DC-DC converters and thus becomes more complex. To address this issue, a multiport bidirectional DC-DC LLC resonant converter for grid connected applications is presented in this research. In order to minimize the control complexity of the proposed system, a zone based controller approach with an integrated modified maximum power point tracking (MMPPT) method, which is based on the incremental conductance method, is also developed. This proposed controller is able to regulate the converter voltage and power flow while either delivering or taking power from the utility grid. The converter presented in this study contains a bidirectional buck-boost converter and an LLC resonant converter in addition to a voltage source grid-tied inverter which are interfacing the PV, the battery and the utility. Extensive simulation analyses through MATLAB/Simulink have proved the operations of the proposed topology. 
    more » « less
  4. ; ; ; ( , 2022 IEEE Power & Energy Society General Meeting (PESGM))
    The development of new technologies is increasing transportation electrification and electric vehicles (EVs) are expected to become even more popular in coming years. High EV adoption rates can increase the potential to use EVs as an energy resource and operate in vehicle-to-grid (V2G) and vehicle-to-home (V2H). This paper focuses on the resilience analysis of using EVs and roof-top solar photovoltaic systems (PVs) to provide power support in network microgrids (MGs) experiencing an outage due to extreme weather conditions. To determine the effectiveness of using EVs and PVs as backup energy resources, a set of resilience metrics are evaluated for different cases and duration. Simulation results show that the management of EVs and PVs in residential networked MGs could provide power support for several hours during the restoration of a distribution system experiencing an outage. 
    more » « less
  5. ; ( , 2022 IEEE Green Technologies Conference (GreenTech))
    This paper makes use of electric vehicles (EVs) that are simultaneously connected to the Photovoltaic Cells (PV) and the power grid. In micro-grids, batteries of the electric vehicles (EVs) used as a source of power to feed the power grid in the peak demands of electricity. EVs can help regulation of the power grid by storing excess solar energy and returning it to the grid during high demand hours. This paper proposes a new architecture of micro-grids by using a rooftop solar system, Battery Electric Vehicles (BEVs), grid connected inverters, a boost converter, a bidirectional half-bridge converter, output filter, including L, LC, or LCL, and transformers. The main parts of this micro-grid are illustrated and modeled, as well as a simulation of their operation. In addition, simulation results explore the charging and discharging scenarios of the BEVs. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email