skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Stability of Ti 3 C 2 T x MXenes in Engineered Environments
MXenes are a newer class of 2D materials, possess with desirable properties such as large specific surface area, conductivity, and hydrophilicity, making them attractive for various environmental applications, including remediation and as membranes for water treatment. Until recently, the practical implementation of MXenes was hindered by their instability in water, although improved synthesis procedures have largely addressed this issue. Consequently, it is now important to assess the stability of MXenes in engineered environments relevant to drinking water and membrane operation (e.g. backwashing). In this study, Ti3C2Tx MXenes were found to remain stable upon exposure to an aqueous environment saturated with oxygen and to UVC and UVA light at circumneutral pH, but were transformed upon exposure to Fe(III) chloride and free chlorine. The chlorination reaction kinetics are 1st order with respect to Ti3C2Tx and free chlorine concentration, with a rate constant that increased at pH ≤ 7.5, implicating HOCl as the reactive species. We propose that MXene reactions with HOCl occur by an electrophilic attack of Cl+, forming TiO2 and degrading the MXene. AFM data shows that transformations are initiated at the edges of the MXene sheets and localized areas on the MXene, suggesting that the initial sites for Cl+ attack are defect sites and/or uncoordinated Ti atoms. During the initial stages of the oxidative degradation, the sheet-like structure of colloidal MXenes is preserved, although prolonged chlorine exposure leads to three-dimensional crystalline (anatase) TiO2 formation. The degradation of MXenes during chlorinationThis contrasts with the inertness of nanoscale TiC, highlighting the need to devise surface modification processes that will allow MXenes to resist the oxidative conditions associated with membrane regeneration/backwashing.  more » « less
Award ID(s):
2001611
PAR ID:
10485231
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
The Royal Society of Chemistry
Date Published:
Journal Name:
Environmental Science: Nano
ISSN:
2051-8153
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, The Journal of Physical Chemistry Letters)
    MXenes are versatile 2D materials demonstrating outstanding electrochemical and physical properties, but their practical use is limited, because of fast degradation in an aqueous environment. To prevent the degradation of MXenes, it is essential to understand the atomistic details of the reaction and to identify active sites. In this letter, we provided a computational analysis of the degradation processes at the interface between MXene basal planes and water using enhanced sampling ab initio molecular dynamics simulations and symbolic regression analysis. Our results indicate that the reactivity of Ti sites toward the water attack reaction depends on both local coordination and chemical composition of the MXene surfaces. Decreasing the work function of the Ti3C2Tx surfaces and avoiding Ti sites that are loosely anchored to the subsurface (e.g., O-coordinated) can improve surface stability. The developed computational framework can be further used to investigate other possible culprits of the degradation reaction, including the role of defects and edges. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Desalination)
    As the demand for sustainable and efficient water treatment solutions grows, the integration of advanced nanomaterials has become a focal point in enhancing membrane technologies. The purpose of this review is to provide a comprehensive and critical analysis of the current state of research on Ti3C2Tx MXenes, highlighting their unique properties, the challenges they address, and the potential they hold for MXene-enhanced biofiltration-membrane systems. The perspective systematically examines how Ti3C2Tx MXenes, with their exceptional electrical conductivity, hydrophilicity, and tunable surface chemistry, can be integrated into biofiltration-membrane systems to improve key performance metrics such as water flux, contaminant rejection, and fouling resistance. Various processes, including biofiltration, adsorption, and nanofiltration, are discussed, where Ti3C2Tx MXenes have been shown to have a potential application. In addition to synthesizing existing literature, experimental validations are presented that demonstrate how MXene incorporation can alter membrane morphology and structure, leading to improved antibacterial properties and enhanced overall performance. These findings underscore the transformative potential of Ti3C2Tx MXenes in developing next-generation biofiltration-membrane technologies that are not only more efficient but also more sustainable. Through this perspective, the key challenges that remain, such as cost implications and long-term stability, are identified, and future research directions are proposed to address these issues. This in-depth analysis highlights the critical role MXenes can play in advancing water treatment technologies, particularly in the context of water reuse, and encourages further interdisciplinary research in this rapidly evolving field. 
    more » « less
  3. ; ; (, Environmental Science: Water Research & Technology)
    Chlorinated and brominated forms of salicylic acid (SA) have recently been identified as a new class of disinfection byproducts (DBPs) in drinking water. Herein, we report the inherent reactivity of several aqueous halogenating agents toward hydrogen salicylate, the predominant species of salicylic acid under environmental conditions. Using synthetic waters, halogenation rates associated with the formation of 3-chloro, 5-chloro, 3-bromo, and 5-bromosalicylate were measured as a function of pH, [Cl − ], [Br − ], free chlorine dose, and the initial concentration of SA. Halogenating-agent specific second-order rate constants were determined and decrease in the order: BrCl > BrOCl > Br 2 > Br 2 O > Cl 2 > Cl 2 O > HOBr > HOCl. Chloride is capable of enhancing rates of bromination and chlorination, ostensibly by promoting the formation of BrCl and Cl 2 , both of which are several orders of magnitude more inherently reactive than HOBr and HOCl, respectively. Kinetic data also support the participation of salicyloyl hypochlorite as a chlorination intermediate capable of influencing chlorination rates at pH >8. Experiments in which buffer concentrations were varied indicate that phosphate buffers can enhance rates of SA bromination but not chlorination; carbonate and borate buffers did not appreciably influence rates of bromination or chlorination. Under conditions representative of chlorinated drinking water, rates of SA bromination will generally exceed rates of SA chlorination. The results discussed herein demonstrate the importance of considering halogenating agents beyond HOBr and HOCl when developing kinetic models to describe and predict halogenation rates and selectivity in waters containing free chlorine. 
    more » « less
  4. ; ; ; ; ; (, Environmental Science: Water Research & Technology)
    null (Ed.)
    This study investigated the reaction kinetics on the oxidative transformation of lead( ii ) minerals by free chlorine (HOCl) and free bromine (HOBr) in drinking water distribution systems. According to chemical equilibrium predictions, lead( ii ) carbonate minerals, cerussite PbCO 3(s) and hydrocerussite Pb 3 (CO 3 ) 2 (OH) 2(s) , and lead( ii ) phosphate mineral, chloropyromorphite Pb 5 (PO 4 ) 3 Cl (s) are formed in drinking water distribution systems in the absence and presence of phosphate, respectively. X-ray absorption near edge spectroscopy (XANES) data showed that at pH 7 and a 10 mM alkalinity, the majority of cerussite and hydrocerussite was oxidized to lead( iv ) mineral PbO 2(s) within 120 minutes of reaction with chlorine (3 : 1 Cl 2  : Pb( ii ) molar ratio). In contrast, very little oxidation of chloropyromorphite occurred. Under similar conditions, oxidation of lead( ii ) carbonate and phosphate minerals by HOBr exhibited a reaction kinetics that was orders of magnitude faster than by HOCl. Their end oxidation products were identified as mainly plattnerite β-PbO 2(s) and trace amounts of scrutinyite α-PbO 2(s) based on X-ray diffraction (XRD) and extended X-ray absorption fine structure (EXAFS) spectroscopic analysis. A kinetic model was established based on the solid-phase experimental data. The model predicted that in real drinking water distribution systems, it takes 0.6–1.2 years to completely oxidize Pb( ii ) minerals in the surface layer of corrosion scales to PbO 2(s) by HOCl without phosphate, but only 0.1–0.2 years in the presence of bromide (Br − ) due the catalytic effects of HOBr generation. The model also predicts that the addition of phosphate will significantly inhibit Pb( ii ) mineral oxidation by HOCl, but only be modestly effective in the presence of Br − . This study provides insightful understanding on the effect of residual disinfectant on the oxidation of lead corrosion scales and strategies to prevent lead release from drinking water distribution systems. 
    more » « less
  5. ; ; ; (, Analytical Methods)
    Free chlorine and free bromine ( e.g. , HOCl and HOBr) are employed as disinfectants in a variety of aqueous systems, including drinking water, wastewater, ballast water, recreational waters, and cleaning products. Yet, the most widely used methods for quantifying free halogens, including those employing N , N -diethyl- p -phenylenediamine (DPD), cannot distinguish between HOCl and HOBr. Herein, we report methods for selectively quantifying free halogens in a variety of aqueous systems using 1,3,5-trimethoxybenzene (TMB). At near-neutral pH, TMB reacted on the order of seconds with HOCl, HOBr, and inorganic bromamines to yield halogenated products that were readily quantified by liquid chromatography or, following liquid–liquid extraction, gas chromatography-mass spectrometry (GC-MS). The chlorinated and brominated products of TMB were stable, and their molar concentrations were used to calculate the original concentrations of HOCl (method quantitation limit (MQL) by GC-MS = 15 nmol L −1 = 1.1 μg L −1 as Cl 2 ) and HOBr (MQL by GC-MS = 30 nmol L −1 = 2 μg L −1 as Cl 2 ), respectively. Moreover, TMB derivatization was efficacious for quantifying active halogenating agents in drinking water, pool water, chlorinated surface waters, and simulated spa waters treated with 1-bromo-3-chloro-5,5-dimethylhydantoin. TMB was also used to quantify bromide as a trace impurity in 20 nominally bromide-free reagents (following oxidation of bromide by HOCl to HOBr). Several possible interferents were tested, and iodide was identified as impeding accurate quantitation of HOCl and HOBr. Overall, compared to the DPD method, TMB can provide lower MQLs, larger linear ranges, and selectivity between HOCl and HOBr. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email