skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Additive manufacturing of stiff and strong structures by leveraging printing-induced strength anisotropy in topology optimization
Title: Additive manufacturing of stiff and strong structures by leveraging printing-induced strength anisotropy in topology optimization
Anisotropy in additive manufacturing (AM), particularly in the material extrusion process, plays a crucial role in determining the actual structural performance, including the stiffness and strength of the printed parts. Unless accounted for, anisotropy can compromise the objective performance of topology-optimized structures and allow premature failures for stress-sensitive design domains. This study harnesses process-induced anisotropy in material extrusion-based 3D printing to design and fabricate stiff, strong, and lightweight structures using a two-step framework. First, an AM-oriented anisotropic strength-based topology optimization formulation optimizes the structural geometry and infill orientations, while assuming both anisotropic (i.e., transversely isotropic) and isotropic infill types as candidate material phases. The dissimilar stiffness and strength interpolation schemes in the formulation allow for the optimized allocation of anisotropic and isotropic material phases in the design domain while satisfying their respective Tsai–Wu and von Mises stress constraints. Second, a suitable fabrication methodology realizes anisotropic and isotropic material phases with appropriate infill density, controlled print path (i.e., infill directions), and strong interfaces of dissimilar material phases. Experimental investigations show up to 37% improved stiffness and 100% improved strength per mass for the optimized and fabricated structures. The anisotropic strength-based optimization improves load-carrying capacity by simultaneous infill alignment along the stress paths and topological adaptation in response to high stress concentration. The adopted interface fabrication methodology strengthens comparatively weaker anisotropic joints with minimal additional material usage and multi-axial infill patterns. Furthermore, numerically predicted failure locations agree with experimental observations. The demonstrated framework is general and can potentially be adopted for other additive manufacturing processes that exhibit anisotropy, such as fiber composites.  more » « less
Award ID(s):
2127134 2047692
PAR ID:
10492196
Author(s) / Creator(s):
;
Publisher / Repository:
ScienceDirect
Date Published:
Journal Name:
Additive Manufacturing
Volume:
75
Issue:
C
ISSN:
2214-8604
Page Range / eLocation ID:
103730
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Rapid Prototyping Journal)
    null (Ed.)
    Purpose Mechanical anisotropy associated with material extrusion additive manufacturing (AM) complicates the design of complex structures. This study aims to focus on investigating the effects of design choices offered by material extrusion AM – namely, the choice of infill pattern – on the structural performance and optimality of a given optimized topology. Elucidation of these effects provides evidence that using design tools that incorporate anisotropic behavior is necessary for designing truly optimal structures for manufacturing via AM. Design/methodology/approach A benchmark topology optimization (TO) problem was solved for compliance minimization of a thick beam in three-point bending and the resulting geometry was printed using fused filament fabrication. The optimized geometry was printed using a variety of infill patterns and the strength, stiffness and failure behavior were analyzed and compared. The bending tests were accompanied by corresponding elastic finite element analyzes (FEA) in ABAQUS. The FEA used the material properties obtained during tensile and shear testing to define orthotropic composite plies and simulate individual printed layers in the physical specimens. Findings Experiments showed that stiffness varied by as much as 22% and failure load varied by as much as 426% between structures printed with different infill patterns. The observed failure modes were also highly dependent on infill patterns with failure propagating along with printed interfaces for all infill patterns that were consistent between layers. Elastic FEA using orthotropic composite plies was found to accurately predict the stiffness of printed structures, but a simple maximum stress failure criterion was not sufficient to predict strength. Despite this, FE stress contours proved beneficial in identifying the locations of failure in printed structures. Originality/value This study quantifies the effects of infill patterns in printed structures using a classic TO geometry. The results presented to establish a benchmark that can be used to guide the development of emerging manufacturing-oriented TO protocols that incorporate directionally-dependent, process-specific material properties. 
    more » « less
  2. ; ; (, Journal of Manufacturing Science and Engineering)
    Abstract Extrusion-based sintering-assisted additive manufacturing (ES-AM) enables the fabrication of intricate metal structures, spanning from simple geometries to complex lattice structures. Sintering plays a vital role in metal densification that requires effective design and optimization of sintering processes for high-quality sintered parts. Notably, sintering behaviors in ES-AM differ from those in traditional methods, primarily due to the heterogeneous distribution of particles and pores induced by the anisotropic fabrication nature of additive manufacturing (AM). This review offers an overview of sintering processes and mechanisms fundamental to ES-AM. Theories governing solid-state sintering and liquid-phase sintering are summarized to advance a thorough comprehension of the associated sintering mechanisms. Computational studies on sintering processes at different length scales are also discussed, including atomic-level molecular dynamics, microlevel simulations (Monte Carlo, phase field, and discrete element method), and macroscopic continuum models. The distinctive anisotropic sintering behaviors in the ES-AM process are further elucidated across multiple levels. Ultimately, future directions for ES-AM, encompassing materials, sintering process, and sintering mechanisms, are outlined to guide research endeavors in this field. This review summarizes multiscale sintering behaviors in both traditional manufacturing and AM, contributing to a deeper understanding of sintering mechanisms and paving the way for innovations in the next generation of manufacturing. 
    more » « less
  3. ; ; ; (, Additive Manufacturing Letters)
    Fusion-based Material Extrusion (MEX) Additive Manufacturing (AM) processes have been extensively used for the fabrication of smart structures with embedded sensors, proving to have several benefits such as reduction in cost, manufacturing time, and assembly. A major issue negatively affecting 3D printed sensors is related to their poor electrical conductivity, as well as inconsistent electrical performance, which leads to electrical power losses amongst other issues. In the present paper, a set of process parameters (ironing, printing temperature, and infill overlap) has been analyzed by performing a Design of Experiment (DoE) factorial plan to minimize the electrical resistance. The best process parameters configuration involves a remarkable reduction of electrical resistance of 47.9%, as well as an improvement of mechanical properties of 31.9% (ultimate tensile strength), 25.8% (elongation at break) and 28.14% (flexural stress). The microstructure of the obtained results has also been analyzed by employing a high-resolution, X-ray Computed Tomography (X-Ray CT) system showing a reduction of intralayer voids of 19.5%. This work demonstrates a clear correlation between process parameters and the corresponding electrical properties, mechanical properties, and internal microstructure. In the present research, it has been shown that i) it is possible to significantly improve the overall 3D printed sensors performance by process parameter selection, and ii) small changes in the microstructure lead to remarkable improvements in electrical and mechanical performance. 
    more » « less
  4. ; ; (, Science Advances)
    Because of increased geometric freedom at a widening range of length scales and access to a growing material space, additive manufacturing has spurred renewed interest in topology optimization of parts with spatially varying material properties and structural hierarchy. Simultaneously, a surge of micro/nanoarchitected materials have been demonstrated. Nevertheless, multiscale design and micro/nanoscale additive manufacturing have yet to be sufficiently integrated to achieve free-form, multiscale, biomimetic structures. We unify design and manufacturing of spatially varying, hierarchical structures through a multimicrostructure topology optimization formulation with continuous multimicrostructure embedding. The approach leads to an optimized layout of multiple microstructural materials within an optimized macrostructure geometry, manufactured with continuously graded interfaces. To make the process modular and controllable and to avoid prohibitively expensive surface representations, we embed the microstructures directly into the 3D printer slices. The ideas provide a critical, interdisciplinary link at the convergence of material and structure in optimal design and manufacturing. 
    more » « less
  5. ; (, 2024 Solid Freeform Fabrication Conference)
    The advance of additive manufacturing makes it possible to design spatially varying lattice structures with complex geometric configurations. The homogenized elastic properties of these periodic lattice structures are known to deviate significantly from isotropic behavior where orthotropic material symmetry is often assumed. This paper addresses the need for a robust homogenization method for evaluating anisotropy of periodic lattice structures including an understanding of how the elastic properties transform under rotation. Here, periodic boundary conditions are applied on two-material representative volume element (RVE) finite element models to evaluate the complete homogenized stiffness tensor. A constrained multi-output regression approach is proposed to evaluate the elasticity tensor components under any assumed material symmetry model. This approach is applied to various lattice structures including scaffold and surface-based Triply Periodic Minimal Surface (TPMS). Our approach is used to assess the accuracy of rotation for assumed anisotropic and orthotropic homogenized material models over a range of lattice structures. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email