An official website of the United States government
Protecting both the essential building contents and the structural system—as well as facilitating and accelerating the post-event functionality of business operations—is a major concern during natural hazards. Floor isolation systems (FIS) with rolling pendulum bearings along with nonlinear fluid viscous dampers (NFVD) have been proposed to mitigate damage and enhance the resiliency of non-structural and structural systems, respectively. These devices are designed to decrease vibrations under dynamic loading conditions. In this poster, we introduce research using tridimensional nonlinear cyber-physical experimental testing (i.e., real-time hybrid simulations) to validate the performance of these response modification devices placed in structural systems under wind and earthquake loading conditions. The effects of soil-structure-foundation and fluid-structure interactions were also accounted for. The novelty of the project is the use of multi-directional large-scale real-time hybrid simulations of complex nonlinear systems under wind and earthquake demands to combine experimental structural modification passive devices with analytical multi-story buildings considering soil-foundation interaction via neural network. Results show that the FIS and NFVD can significantly reduce the demand on non-structural and structural systems of buildings subjected to natural hazards whose response can be also significantly affected by soil-foundation-structure interaction. A product of this research is the data (which is linked in Related Works), which can be used to compare with new studies using the same experimental techniques and structural modification devices or with alternative approaches. Researchers interested in multi-natural hazards resilience and mitigation, state-of-the-art structural experimental techniques, and the use of machine learning as a tool to improve modeling efficiency will benefit from its results. Also, companies dedicated to the commercial development of structural response modification devices, as well as policymakers working or with interest in economic and social resilience.
more »
« less
Open-source simulation of strongly-coupled fluid-structure interaction between non-conformal interfaces
Design code-based “life-safety” requirements for structural earthquake and tsunami design offer reasonable guidelines to construct buildings that will remain standing during a tsunami or seismic event. Much less consideration has been given to assessing structural resilience during sequential earthquake and tsunami multi-hazard events. Such events present a series of extreme loading scenarios, where damage sustained during the earthquake influences structural performance during the subsequent inundation. Similar difficulties exist with respect to damage sustained during tropical events, as wind and fluid loading may vary with structural response or accumulated damage. To help ensure critical structures meet a “life-safety” level of performance during such multi-hazard events, analysis software capable of simulating simultaneous structural and fluid dynamics must be developed. To address this gap in understanding of non-linear fluid-structure-interaction (FSI), an open-source tool (FOAMySees) was developed for simulation of tsunami and wave impact analysis of post-earthquake non-linear structural response of buildings. The tool is comprised of the Open-source Field Operation And Manipulation software package and OpenSeesPy, a Python 3 interpreter of OpenSees. The programs are coupledviapreCICE, a coupling library for partitioned multi-physics simulation. FOAMySees has been written to work in a Linux OS environment with HPC clusters in mind. The FOAMySees program offers a partitioned conventional-serial-staggered coupling scheme, with optional implicit iteration techniques to ensure a strongly-coupled two-way FSI solution. While FOAMySees was developed specifically for tsunami-resilience analysis, it may be utilized for other FSI applications with ease. With this coupled Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) program, tsunami and earthquake simulations may be run sequentially or simultaneously, allowing for the evaluation of non-linear structural response to multi-hazard excitation.
more »
« less
- Award ID(s):
- 1933184
- PAR ID:
- 10493411
- Editor(s):
- Rodriguez, Julio A.
- Publisher / Repository:
- Frontiers
- Date Published:
- Journal Name:
- Frontiers in Built Environment
- Volume:
- 9
- ISSN:
- 2297-3362
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Driven by demand for sustainable buildings and reduction in construction time, mass timber, specifically cross-laminated timber (CLT), is being more widely used in mid-rise buildings in the US. In areas of the US with a significant seismic (i.e. earthquake) hazard, mass timber buildings that are seismically resilient are of significant interest. Low damage post-tensioned self-centering CLT shear walls (SC-CLT walls) provide an opportunity to develop seismically resilient CLT buildings. There is however insufficient knowledge of the lateral-load response and damage states of SC-CLT walls under multidirectional seismic loading conditions, which can have a pronounce effect on the seismic resilience of buildings with SC-CLT walls. In order to fill this knowledge gap, a series of lateral-load tests were performed at the NHERI Lehigh Large-Scale Multi-directional Hybrid Simulation Experimental Facility to investigate the multidirectional cyclic behavior of a low damage, resilient three-dimensional CLT building sub-assembly with SC-CLT coupled shear walls, CLT floor diaphragm, collector beams, and gravity load system. Comparisons are made between the lateral-load experimental response of the SC-CLT walls under unidirectional and multidirectional cyclic loading.more » « less
-
A series of shake table tests were recently conducted on full-scale 10-story and 6-story mass timber buildings at the 6-DOF Large High-Performance Outdoor Shaking Table facility at the University of California San Diego. Stairs, providing the primary egress in and out of a building during and after an earthquake event, were incorporated in each of these building test programs. To ensure they support the immediate recovery of building function, a variety of drift-release details were incorporated. Previous earthquake events and experimental studies have shown that stairs are among the most drift-sensitive nonstructural systems and are prone to damage, therefore relieving interstory drifts is paramount to improving their performance. To this end, the designed drift-release connections within the stairs considered the test buildings response during earthquake motions scaled at various hazard levels with expected minor and repairable damage under large earthquake loading. This paper provides an overview of the shake table test programs from the perspective of the design and performance of resilient steel stairs.more » « less
-
The objective of this paper is to investigate the post-earthquake thermal-mechanical response of cold-formed steel (CFS) members. A 10-story cold-formed steel building (CFS-NHERI) will undergo seismic tests, followed by post-earthquake live fire tests. To support the fire test setup, computational models are developed to simulate the impact of varying post-earthquake damage levels on the fire response of the structure. As a panelized system, damage to different finish and nonstructural systems significantly affects the thermal behavior and load-bearing capacity of the CFS components. The computational models integrate the modeling capability in CUFSM and SAFIR for the elastic buckling, heat transfer, and transient structural analysis under fire. A parametric analysis considering different seismic damage levels is conducted to study the buckling and strength behavior of the CFS members under fire-induced nonuniform temperature fields. These pre-test models inform the duration and severity of the fire tests to maintain structural stability while achieving substantial thermal loading on the CFS load-bearing system. They also provide guidance for the sensor layout plan for the fire tests. This study advances methods for fire resilience of thin-walled CFS structures under multi-hazard scenarios.more » « less
-
Abstract Advancing the seismic resilience of building systems is an active area of research in earthquake engineering. Ensuring safe egress in and out of buildings during extreme events, such as an earthquake, is essential to supporting this effort. To this end, understanding the seismic response of stairs facilitates the robust design of egress systems to ensure they can remain operable after an earthquake. From prior earthquake events and physical experiments, it is understood that stairs with a flight to landing fixed connection at multiple levels within a building are prone to damage. In addition, the stair system with flight to landing fixed attachments may affect the dynamic behavior of the building. To accommodate seismic inter‐story drifts, a kinematically free connection between the stairs and landing has been proposed. Herein this connection is referred to as adrift‐compatiblestair connection. To investigate and aid in the design of such a connection, a unique set of shake table experiments were conducted at the University of Nevada, Reno. In this paper, an overview of these tests is presented, and a high‐fidelity finite element model of the tested stair system is used to predict the responses measured during these experiments. Developed in Abaqus, the robustness of the modeled stair unit is investigated considering a variety of contrasting connections, namely, drift‐compatible connections, fixed ends and one end fixed and the other free. Results from these numerical simulations offer guidance towards development of simplified models of multi‐level stair subsystems. Such models are needed when investigating seismic resilience of building systems across a wider range of hazard levels. Furthermore, best practices observed utilizing the models developed and evaluated herein against experimental data will be useful for subsequent analysis of larger stair tower models, such as the 10‐story stair system implemented in the NHERI Tall Wood mass timber building with post‐tensioned rocking walls, conducted in 2023 at the UC San Diego Large High‐Performance Outdoor Shake Table.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3389/fbuil.2023.1120518
