An official website of the United States government
Metal additive manufacturing has significantly evolved since the 1990s, achieving a market valuation of USD 6.36 billion in 2022, with an anticipated compound annual growth rate of 24.2% from 2023 to 2030. While powder-bed-based methods like powder bed fusion and binder jetting dominate the market due to their high accuracy and resolution, they face challenges such as lengthy build times, excessive costs, and safety concerns. Non-powder-bed-based techniques, including direct energy deposition, material extrusion, and sheet lamination, offer advantages such as larger build sizes and lower energy consumption but also encounter issues like residual stress and poor surface finish. The existing reviews of non-powder-bed-based metal additive manufacturing are restricted to one technical branch or one specific material. This survey investigates and analyzes each non-powder-bed-based technique in terms of its manufacturing method, materials, product quality, and summary for easy understanding and comparison. Innovative designs and research status are included.
more »
« less
Biotechnological production of omega-3 fatty acids: current status and future perspectives
Omega-3 fatty acids, including alpha-linolenic acids (ALA), eicosapentaenoic acid (EPA), and docosahexaenoic acid (DHA), have shown major health benefits, but the human body’s inability to synthesize them has led to the necessity of dietary intake of the products. The omega-3 fatty acid market has grown significantly, with a global market from an estimated USD 2.10 billion in 2020 to a predicted nearly USD 3.61 billion in 2028. However, obtaining a sufficient supply of high-quality and stable omega-3 fatty acids can be challenging. Currently, fish oil serves as the primary source of omega-3 fatty acids in the market, but it has several drawbacks, including high cost, inconsistent product quality, and major uncertainties in its sustainability and ecological impact. Other significant sources of omega-3 fatty acids include plants and microalgae fermentation, but they face similar challenges in reducing manufacturing costs and improving product quality and sustainability. With the advances in synthetic biology, biotechnological production of omega-3 fatty acids via engineered microbial cell factories still offers the best solution to provide a more stable, sustainable, and affordable source of omega-3 fatty acids by overcoming the major issues associated with conventional sources. This review summarizes the current status, key challenges, and future perspectives for the biotechnological production of major omega-3 fatty acids.
more »
« less
- Award ID(s):
- 1911480
- PAR ID:
- 10497581
- Editor(s):
- Paul David Cotter, Professor
- Publisher / Repository:
- Frontiers
- Date Published:
- Journal Name:
- Frontiers in Microbiology
- Volume:
- 14
- ISSN:
- 1664-302X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)This paper is review with 119 references. Approaches to supplant currently used plastics with materials made from more sustainably-sourced monomers is one of the great contemporary challenges in sustainable chemistry. Fatty acids are attractive candidates as polymer precursors because they can be affordably produced on all inhabited continents, and they are also abundant as underutilized by-products of other industries. In surveying the array of synthetic approaches to convert fatty acids into polymers, those routes that produce organosulfur polymers stand out as being especially attractive from a sustainability standpoint. The first well-explored synthetic approach to fatty acid-derived organosulfur polymers employs the thiol-ene click reaction or the closely-related thiol-yne variation. This approach is high-yielding under mild conditions with up to 100% atom economy and high functional group tolerance. More recently, inverse vulcanization has been employed to access high sulfur-content polymers by the reaction of fatty acid-derived olefins with elemental sulfur. This approach is attractive not only because it is theoretically 100% atom economical but also because elemental sulfur is itself an underutilized by-product of fossil fuel refining. The thiol-ene, inverse vulcanization, and mechanistically-related thiol-yne and classic vulcanization are therefore discussed as promising routes to access polymers and composites from fatty acid-derived precursors.more » « less
-
Abstract Microalgae are the main source of the omega‐3 fatty acids eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA), essential for the healthy development of most marine and terrestrial fauna including humans. Inverse correlations of algal EPA and DHA proportions (% of total fatty acids) with temperature have led to suggestions of a warming‐induced decline in the global production of these biomolecules and an enhanced importance of high latitude organisms for their provision. The cold Arctic Ocean is a potential hotspot of EPA and DHA production, but consequences of global warming are unknown. Here, we combine a full‐seasonal EPA and DHA dataset from the Central Arctic Ocean (CAO), with results from 13 previous field studies and 32 cultured algal strains to examine five potential climate change effects; ice algae loss, community shifts, increase in light, nutrients, and temperature. The algal EPA and DHA proportions were lower in the ice‐covered CAO than in warmer peripheral shelf seas, which indicates that the paradigm of an inverse correlation of EPA and DHA proportions with temperature may not hold in the Arctic. We found no systematic differences in the summed EPA and DHA proportions of sea ice versus pelagic algae, and in diatoms versus non‐diatoms. Overall, the algal EPA and DHA proportions varied up to four‐fold seasonally and 10‐fold regionally, pointing to strong light and nutrient limitations in the CAO. Where these limitations ease in a warming Arctic, EPA and DHA proportions are likely to increase alongside increasing primary production, with nutritional benefits for a non‐ice‐associated food web.more » « less
-
Abstract Western diets are becoming increasingly common around the world. Western diets have high omega 6 (ω-6) and omega 3 (ω-3) fatty acids and are linked to bone loss in humans and animals. Dietary fats are not created equal; therefore, it is vital to understand the effects of specific dietary fats on bone. We aimed to determine how altering the endogenous ratios of ω-6:ω-3 fatty acids impacts bone accrual, strength, and fracture toughness. To accomplish this, we used the Fat-1 transgenic mice, which carry a gene responsible for encoding a ω-3 fatty acid desaturase that converts ω-6 to ω-3 fatty acids. Male and female Fat-1 positive mice (Fat-1) and Fat-1 negative littermates (WT) were given either a high-fat diet (HFD) or low-fat diet (LFD) at 4 wk of age for 16 wk. The Fat-1 transgene reduced fracture toughness in males. Additionally, male BMD, measured from DXA, decreased over the diet duration for HFD mice. In males, neither HFD feeding nor the presence of the Fat-1 transgene impacted cortical geometry, trabecular architecture, or whole-bone flexural properties, as detected by main group effects. In females, Fat-1-LFD mice experienced increases in BMD compared to WT-LFD mice; however, cortical area, distal femur trabecular thickness, and cortical stiffness were reduced in Fat-1 mice compared to pooled WT controls. However, reductions in stiffness were caused by a decrease in bone size and were not driven by changes in material properties. Together, these results demonstrate that the endogenous ω-6:ω-3 fatty acid ratio influences bone material properties in a sex-dependent manner. In addition, Fat-1 mediated fatty acid conversion was not able to mitigate the adverse effects of HFD on bone strength and accrual.more » « less
-
Conversion of plastic wastes to fatty acids is an attractive means to supplement the sourcing of these high-value, high-volume chemicals. We report a method for transforming polyethylene (PE) and polypropylene (PP) at ~80% conversion to fatty acids with number-average molar masses of up to ~700 and 670 daltons, respectively. The process is applicable to municipal PE and PP wastes and their mixtures. Temperature-gradient thermolysis is the key to controllably degrading PE and PP into waxes and inhibiting the production of small molecules. The waxes are upcycled to fatty acids by oxidation over manganese stearate and subsequent processing. PP ꞵ-scission produces more olefin wax and yields higher acid-number fatty acids than does PE ꞵ-scission. We further convert the fatty acids to high-value, large–market-volume surfactants. Industrial-scale technoeconomic analysis suggests economic viability without the need for subsidies.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.3389/fmicb.2023.1280296
