skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: An Expanding Foam‐Fabric Orthopedic Cast
Abstract Traditional orthopedic casting strategies used in the treatment of fractured limbs, such as fiberglass and plaster‐based tapes, suffer from several drawbacks, including technically challenging molding for application, occurrence of skin complications, and the requirement of a potentially hazardous oscillatory saw for removal, which is frightening for pediatric patients. This work presents the design and evaluation of a foam‐fabric cast (FFC) to overcome these drawbacks by integrating strategies from soft materials engineering and functional apparel design. A fabric sleeve is designed to enable the reactive injection molding of a polymer foam and provide a form‐fitting orthopedic cast for the human forearm—with sufficient mechanical reinforcement to stabilize a fractured limb. Through testing with a replica limb and human subjects with a range of forearm volumes, the FFC application process is demonstrated and characterized. The thermal, pressural, chemical, and hygienic safety are comparable to or safer than existing clinical technologies. The FFC weighs only ≈150 g, is water resistant, and represents a robust alternative to traditional casts that can be i) manufactured at a large scale for a low cost; ii) applied to patients simply, rapidly (≈5 min), and reliably; and iii) removed easily with a pair of scissors.  more » « less
Award ID(s):
2011754
PAR ID:
10500020
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Materials Technologies
Volume:
7
Issue:
9
ISSN:
2365-709X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Robotica)
    Summary A design and manufacturing method is described for creating a motor tendon–actuated soft foam robot. The method uses a castable, light, and easily compressible open-cell polyurethane foam, producing a structure capable of large (~70% strain) deformations while requiring low torques to operate ( < 0.2 N·m). The soft robot can change shape, by compressing and folding, allowing for complex locomotion with only two actuators. Achievable motions include forward locomotion at 13 mm/s (4.3% of body length per second), turning at 9◦/s, and end-over-end flipping. Hard components, such as motors, are loosely sutured into cavities after molding. This reduces unwanted stiffening of the soft body. This work is the first demonstration of a soft open-cell foam robot locomoting with motor tendon actuators. The manufacturing method is rapid (~30 min per mold), inexpensive (under $3 per robot for the structural foam), and flexible, and will allow a variety of soft foam robotic devices to be produced. 
    more » « less
  2. ; ; (, Advanced Materials Technologies)
    Abstract Wearable strain sensors for movement tracking are a promising paradigm to improve clinical care for patients with neurological or musculoskeletal conditions, with further applicability to athletic wear, virtual reality, and next‐generation game controllers. Clothing‐like wearable strain sensors can support these use cases, as the fabrics used for clothing are generally lightweight and breathable, and interface with the skin in a manner that is mechanically and thermally familiar. Herein, a fabric capacitive strain sensor is presented and integrated into everyday clothing to measure human motions. The sensor is made of thin layers of breathable fabrics and exhibits high strains (>90%), excellent cyclic stability (>5000 cycles), and high water vapor transmission rates (≈50 g/h m2), the latter of which allows for sweat evaporation, an essential parameter of comfort. The sensor's functionality is verified under conditions similar to those experienced on the surface of the human body (35°C and % relative humidity) and after washing with fabric detergent. In addition, the fabric sensor shows stable capacitance at excitation frequencies up to 1 MHz, facilitating its low‐cost implementation in the Arduino environment. Finally, as a proof of concept, multiple fabric sensors are seamlessly integrated with commercial activewear to collect movement data. With the prioritization of breathability (air permeability and water vapor transmission), the fabric sensor design presented herein paves the way for future comfortable, unobtrusive, and discrete sensory clothing. 
    more » « less
  3. ; ; (, Journal of Materials Chemistry B)
    null (Ed.)
    Magnesium–yttrium-rare earth element alloys such as WE43 are potential candidates for future bioabsorbable orthopedic implant materials due to their biocompatibility, mechanical properties similar to human bone, and the ability to completely degrade in vivo . Unfortunately, the high corrosion rate of WE43 Mg alloys in physiological environments and subsequent loss of structural integrity limit the wide applications of these materials. In this study, the effect of chemical heterogeneity and microstructure on the corrosion resistance of two alloys with different metallurgical states was investigated: cast (as in traditional preparation) and as-deposited produced by magnetron sputtering. The corrosion behavior was studied by potentiodynamic polarization and electrochemical impedance spectroscopy tests in blood bank buffered saline solution. It was found that the as-deposited alloy showed more than one order of magnitude reduction in corrosion current density compared to the cast alloy, owing to the elimination of micro-galvanic coupling between the Mg matrix and the precipitates. The microstructure and formation mechanism of corrosion products formed on both alloys were discussed based on immersion tests and direct measurements of X-ray photoelectron spectrometry (XPS) and cross-sectional transmission electron microscopy (TEM) analysis. 
    more » « less
  4. ; ; ; ; (, MRS Advances)
    Abstract A polycrystalline Cu foam with sub-micron ligament sizes was formed by creating a non-woven fabric via electrospinning with a homogeneous mixture of polyvinyl alcohol(PVA)-and copper acetate(Cu(Ac) 2 ). Thermogravimetric measurement of the electrospun fabric of the precursor solution is reported. Oxidizing the precursor fabric at 773K formed an oxide nano-foam; subsequent heating at 573K with a reducing gas transformed the CuO nano-foam to Cu with a similar ligament and meso-scale pore size morphology. A cross-section prepared by focused ion beam lift-out shows the polycrystalline structure with multi-scale porosity. The mechanical property of the Cu nano-foam is measured by nano-indentation. The load-depth curves and deduced mechanical properties suggest that additional intra-ligament pores lead to unique structure-property relations in this non-conventional form of metal. 
    more » « less
  5. ; ; ; ; ; (, Applied Clinical Informatics)
    Objective Visual cohort analysis utilizing electronic health record data has become an important tool in clinical assessment of patient outcomes. In this article, we introduce Composer, a visual analysis tool for orthopedic surgeons to compare changes in physical functions of a patient cohort following various spinal procedures. The goal of our project is to help researchers analyze outcomes of procedures and facilitate informed decision-making about treatment options between patient and clinician. Methods In collaboration with orthopedic surgeons and researchers, we defined domain-specific user requirements to inform the design. We developed the tool in an iterative process with our collaborators to develop and refine functionality. With Composer, analysts can dynamically define a patient cohort using demographic information, clinical parameters, and events in patient medical histories and then analyze patient-reported outcome scores for the cohort over time, as well as compare it to other cohorts. Using Composer's current iteration, we provide a usage scenario for use of the tool in a clinical setting. Conclusion We have developed a prototype cohort analysis tool to help clinicians assess patient treatment options by analyzing prior cases with similar characteristics. Although Composer was designed using patient data specific to orthopedic research, we believe the tool is generalizable to other healthcare domains. A long-term goal for Composer is to develop the application into a shared decision-making tool that allows translation of comparison and analysis from a clinician-facing interface into visual representations to communicate treatment options to patients. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email