An official website of the United States government
The food industry is one of the most regulated businesses in the world and follows strict internal and regulated requirements to ensure product reliability and safety. In particular, the industry must ensure that biological, chemical, and physical hazards are controlled from the production and distribution of raw materials to the consumption of the finished product. In the United States, the FDA regulates the efficacy and safety of food ingredients and packaging. Traditional packaging materials such as paper, aluminum, plastic, and biodegradable compostable materials have gradually evolved. Coatings made with nanotechnology promise to radically improve the performance of food packaging materials, as their excellent properties improve the appearance, taste, texture, and shelf life of food. This review article highlights the role of nanomaterials in designing and manufacturing anti-fouling and antimicrobial coatings for the food packaging industry. The use of nanotechnology coatings as protective films and sensors to indicate food quality levels is discussed. In addition, their assessment of regulatory and environmental sustainability is developed. This review provides a comprehensive perspective on nanotechnology coatings that can ensure high-quality nutrition at all stages of the food chain, including food packaging systems for humanitarian purposes.
more »
« less
High-throughput coating with biodegradable antimicrobial pullulan fibres extends shelf life and reduces weight loss in an avocado model
Food waste and food safety motivate the need for improved food packaging solutions. However, current films/coatings addressing these issues are often limited by inefficient release dynamics that require large quantities of active ingredients. Here we developed antimicrobial pullulan fibre (APF)-based packaging that is biodegradable and capable of wrapping food substrates, increasing their longevity and enhancing their safety. APFs were spun using a high-throughput system, termed focused rotary jet spinning, with water as the only solvent, allowing the incorporation of naturally derived antimicrobial agents. Using avocados as a representative example, we demonstrate that APF-coated samples had their shelf life extended by inhibited proliferation of natural microflora, and lost less weight than uncoated control samples. This work offers a promising technique to produce scalable, low-cost and environmentally friendly biodegradable antimicrobial packaging systems.
more »
« less
- Award ID(s):
- 2011754
- PAR ID:
- 10500023
- Publisher / Repository:
- Nature
- Date Published:
- Journal Name:
- Nature Food
- Volume:
- 3
- Issue:
- 6
- ISSN:
- 2662-1355
- Page Range / eLocation ID:
- 428 to 436
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Carbon dots represent a rapidly advancing and expanding research field, with a large number of literature reports on their potential technological applications including those relevant to food safety. In this article, the dot samples prepared by the deliberate chemical functionalization of preexisting small carbon nanoparticles or by thermal carbonization of various organic precursors under different processing conditions are highlighted and critiqued for their similarities and differences in sample structure-morphology and properties, especially antimicrobial properties for their food safety–related uses. Also highlighted and discussed are representative recent examples for the use of dot samples to inactivate foodborne pathogens, disrupt biofilms or prevent their formation, and extend the shelf life of food products, which involve different antibacterial mechanisms. Some perspectives on the further development of the carbon dots–based/derived antimicrobial platform and related excellent application opportunities in food safety are provided.more » « less
-
Abstract Food quality monitoring, particularly, the detection of bacterial pathogens and spoilage throughout the food supply chain, is critical to ensure global food safety and minimize food loss. Incorporating sensors into packaging is promising, but it is challenging to achieve the required sampling volume while using food‐safe sensor materials. Here, by leveraging water‐based processing of silk fibroin, a platform for the detection of pathogenic bacteria in food is realized using a porous silk microneedle array; the microneedle array samples fluid from the interior of the food by capillary action, presenting the fluid to polydiacetylene‐based bioinks printed on the backside of the array. Through the colorimetric response of bioink patterns,Escherichia colicontamination in fish fillets is identified within 16 h of needle injection. This response is distinct from spoilage measured via the increase in sample pH. It is also shown that the microneedles can pierce commercial food packaging, and subsequently sample fluid and present it to the sensor, enabling the adaptation of the technology downstream in food supply chains such as in stores or at home. This study highlights that regenerated structural biopolymers can serve as safe materials for food contact and sensing with robust mechanical properties and tailored chemistry.more » « less
-
Abstract This research aims to develop chitosan-zein protein films supplemented withBergenia ciliata(Bc) extract, a traditionally important medical herb of Himalayan origin. The film’s physicochemical, mechanical, antioxidant, and antimicrobial properties were systematically explored. The opacity of chitosan film increased from 2.42 ± 0.97 to 10.32 ± 1.44 upon introducing zein (Z) protein in chitosan (Cs) in a 1:2 ratio (w/w); conferring enhanced UV-blocking attributes. IncorporatingB. ciliataextracts in the chitosan-zein film (Cs-Z-Bc) under optimized conditions further increased the opacity to 16.27 ± 1.03 without compromising the tensile strength. The α-diphenyl-β-picrylhydrazyl scavenging activity of the Cs-Z-Bc film was found to be 97.07 ± 1.09%. Additionally, these optimized films displayed significant antimicrobial efficacy, with zones of inhibition of 11.4 mm measured for gram-positive strains likeC. subtilisandS. aureusand 11.2 mm and 11.1 mm forE. coliandK. pneumoniae(gram-negative) bacterial strains. The film also showed excellent biodegradable properties. The shelf life study of Himalayan cheese was significantly increased when wrapped with the film. These findings suggested thatB. ciliataextract-fortified chitosan-zein films can be an excellent food packaging material.more » « less
-
The United Nations (UN) estimates that more than one billion people in this world do not have access to safe drinking water due to microbial hazards and it kills more than 7.6 million children every year via waterborne diseases. Driven by the need for the removal and inactivation of waterborne pathogens in drinking water, we report the chemical design and details of microscopic characterization of a bio-conjugated chitosan attached carbon nanotube based three dimensional (3D) nanoporous architecture, which has the capability for effective separation and complete disinfection of waterborne pathogens from environmental water samples. In the reported design, chitosan, a biodegradable antimicrobial polysaccharide with an architecture-forming ability has been used for the formation of 3D pores as channels for water passage, as well as to increase the permeability on the inner and outer architectures for killing Rotavirus and Shigella waterborne pathogens. On the other hand, due to their large surface area, CNTs have been wrapped by chitosan to enhance the adsorption capability of the architecture for the separation and removal of pathogens from water. The reported data show that the anti- Rotavirus VP7 antibody and LL-37 antimicrobial peptide conjugated chitosan–CNT architecture can be used for efficient separation, identification and 100% eradication of Rotavirus and Shigella waterborne pathogens from water samples of different sources. A detailed mechanism for the separation and inactivation of waterborne pathogens using the bio-conjugated chitosan based 3D architecture has been discussed using microscopic and spectroscopic studies. Reported experimental data demonstrate that the multifunctional bio-conjugated 3D architecture has good potential for use in waterborne pathogen separation and inactivation technology.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1038/s43016-022-00523-w
