More Like this

1. Lewis Acid Site Assisted Bifunctional Activity of Tin Doped Gallium Oxide and Its Application in Rechargeable Zn‐Air Batteries

   https://doi.org/10.1002/smll.202202648  

   Nair, Aruna_Narayanan; Sanad, Mohamed_F; Jayan, Rahul; Gutierrez, Guillermo; Ge, Yulu; Islam, Md_Mahbubul; Hernandez‐Viezcas, Jose_A; Zade, Vishal; Tripathi, Shalini; Shutthanandan, Vaithiyalingam; et al (July 2022, Small)

   Abstract The enhanced safety, superior energy, and power density of rechargeable metal‐air batteries make them ideal energy storage systems for application in energy grids and electric vehicles. However, the absence of a cost‐effective and stable bifunctional catalyst that can replace expensive platinum (Pt)‐based catalyst to promote oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at the air cathode hinders their broader adaptation. Here, it is demonstrated that Tin (Sn) doped β‐gallium oxide (β‐Ga₂O₃) in the bulk form can efficiently catalyze ORR and OER and, hence, be applied as the cathode in Zn‐air batteries. The Sn‐doped β‐Ga₂O₃sample with 15% Sn (Sn_x=0.15‐Ga₂O₃) displayed exceptional catalytic activity for a bulk, non‐noble metal‐based catalyst. When used as a cathode, the excellent electrocatalytic bifunctional activity of Sn_x=0.15‐Ga₂O₃leads to a prototype Zn‐air battery with a high‐power density of 138 mW cm⁻²and improved cycling stability compared to devices with benchmark Pt‐based cathode. The combined experimental and theoretical exploration revealed that the Lewis acid sites in β‐Ga₂O₃aid in regulating the electron density distribution on the Sn‐doped sites, optimize the adsorption energies of reaction intermediates, and facilitate the formation of critical reaction intermediate (O*), leading to enhanced electrocatalytic activity. 

   more » « less
2. Self-sufficient metal–air battery systems enabled by solid-ion conductive interphases

   https://doi.org/10.1039/D3FD00112A  

   Jin, Shuo; Hong, Shifeng; Gao, Xiaosi; Deng, Yue; Joo, Yong Lak; Archer, Lynden A (January 2024, Faraday Discussions)

   Rechargeable metal–air batteries operated in ambient air fail as a result of complex anode surface reactions. Interphases composed of metallic In protect Li anodes, enabling Li–air batteries to operate in ambient air. 

   more » « less
3. High Performance Air Breathing Flexible Lithium–Air Battery

   https://doi.org/10.1002/smll.202102072  

   Ahmad Jaradat, Chengji Zhang (January 2021, Small)

   null (Ed.)

   Lithium–oxygen (Li–O2) batteries possess the highest theoretical energy density (3500 Wh kg−1), which makes them attractive candidates for modern electronics and transportation applications. In this work, an inexpensive, flexible, and wearable Li–O2 battery based on the bifunctional redox mediator of InBr3, MoS2 cathode catalyst, and Fomblin-based oxygen permeable membrane that enable long-cycle-life operation of the battery in pure oxygen, dry air, and ambient air is designed, fabricated, and tested. The battery operates in ambient air with an open system air-breathing architecture and exhibits excellent cycling up to 240 at the high current density of 1 A g−1 with a relative humidity of 75%. The electrochemical performance of the battery including deep-discharge capacity, and rate capability remains almost identical after 1000 cycle in a bending fatigue test. This finding opens a new direction for utilizing high performance Li–O2 batteries for applications in the field of flexible and wearable electronics. 

   more » « less
4. (Digital Presentation) Ultrathin Stabilized Zn Metal Anode for Highly Reversible Aqueous Zn-Ion Batteries

   https://doi.org/10.1149/MA2022-024439mtgabs  

   Zhang, Yuxuan; Song, Han Wook; Lee, Sunghwan (October 2022, ECS Meeting Abstracts)

   Ever-increasing demands for energy, particularly being environmentally friendly have promoted the transition from fossil fuels to renewable energy.¹Lithium-ion batteries (LIBs), arguably the most well-studied energy storage system, have dominated the energy market since their advent in the 1990s.²However, challenging issues regarding safety, supply of lithium, and high price of lithium resources limit the further advancement of LIBs for large-scale energy storage applications.³Therefore, attention is being concentrated on an alternative electrochemical energy storage device that features high safety, low cost, and long cycle life. Rechargeable aqueous zinc-ion batteries (ZIBs) is considered one of the most promising alternative energy storage systems due to the high theoretical energy and power densities where the multiple electrons (Zn²⁺) . In addition, aqueous ZIBs are safer due to non-flammable electrolyte (e.g., typically aqueous solution) and can be manufactured since they can be assembled in ambient air conditions.⁴As an essential component in aqueous Zn-based batteries, the Zn metal anode generally suffers from the growth of dendrites, which would affect battery performance in several ways. Second, the led by the loose structure of Zn dendrite may reduce the coulombic efficiency and shorten the battery lifespan.⁵ Several approaches were suggested to improve the electrochemical stability of ZIBs, such as implementing an interfacial buffer layer that separates the active Zn from the bulk electrolyte.⁶However, the and thick thickness of the conventional Zn metal foils remain a critical challenge in this field, which may diminish the energy density of the battery drastically. According to a theretical calculation, the thickness of a Zn metal anode with an areal capacity of 1 mAh cm^-2is about 1.7 μm. However, existing extrusion-based fabrication technologies are not capable of downscaling the thickness Zn metal foils below 20 μm. Herein, we demonstrate a thickness controllable coating approach to fabricate an ultrathin Zn metal anode as well as a thin dielectric oxide separator. First, a 1.7 μm Zn layer was uniformly thermally evaporated onto a Cu foil. Then, Al₂O₃, the separator was deposited through sputtering on the Zn layer to a thickness of 10 nm. The inert and high hardness Al₂O₃layer is expected to lower the polarization and restrain the growth of Zn dendrites. Atomic force microscopy was employed to evaluate the roughness of the surface of the deposited Zn and Al₂O₃/Zn anode structures. Long-term cycling stability was gauged under the symmetrical cells at 0.5 mA cm^-2for 1 mAh cm^-2. Then the fabricated Zn anode was paired with MnO₂as a full cell for further electrochemical performance testing. To investigate the evolution of the interface between the Zn anode and the electrolyte, a home-developed in-situ optical observation battery cage was employed to record and compare the process of Zn deposition on the anodes of the Al₂O₃/Zn (demonstrated in this study) and the procured thick Zn anode. The surface morphology of the two Zn anodes after circulation was characterized and compared through scanning electron microscopy. The tunable ultrathin Zn metal anode with enhanced anode stability provides a pathway for future high-energy-density Zn-ion batteries.Obama, B., The irreversible momentum of clean energy.Science2017,355(6321), 126-129.Goodenough, J. B.; Park, K. S., The Li-ion rechargeable battery: a perspective.J Am Chem Soc2013,135(4), 1167-76.Li, C.; Xie, X.; Liang, S.; Zhou, J., Issues and Future Perspective on Zinc Metal Anode for Rechargeable Aqueous Zinc‐ion Batteries.Energy & Environmental Materials2020,3(2), 146-159.Jia, H.; Wang, Z.; Tawiah, B.; Wang, Y.; Chan, C.-Y.; Fei, B.; Pan, F., Recent advances in zinc anodes for high-performance aqueous Zn-ion batteries.Nano Energy2020,70.Yang, J.; Yin, B.; Sun, Y.; Pan, H.; Sun, W.; Jia, B.; Zhang, S.; Ma, T., Zinc Anode for Mild Aqueous Zinc-Ion Batteries: Challenges, Strategies, and Perspectives.Nanomicro Lett2022,14(1), 42.Yang, Q.; Li, Q.; Liu, Z.; Wang, D.; Guo, Y.; Li, X.; Tang, Y.; Li, H.; Dong, B.; Zhi, C., Dendrites in Zn-Based Batteries.Adv Mater2020,32(48), e2001854. Acknowledgment This work was partially supported by the U.S. National Science Foundation (NSF) Award No. ECCS-1931088. S.L. and H.W.S. acknowledge the support from the Improvement of Measurement Standards and Technology for Mechanical Metrology (Grant No. 22011044) by KRISS. Figure 1 

   more » « less
5. High-efficiency air-bridge thermophotovoltaic cells

   https://doi.org/10.1016/j.joule.2024.05.002  

   Roy-Layinde, Bosun; Lim, Jihun; Arneson, Claire; Forrest, Stephen R; Lenert, Andrej (May 2024, Joule)

   Thermophotovoltaic (TPV) cells generate electricity by converting infrared radiation emitted by a hot thermal source. Air-bridge TPVs have demonstrated enhanced power conversion efficiencies by recuperating a large amount of power carried by below-bandgap (out-of-band) photons. Here, we demonstrate single-junction InGaAs(P) air-bridge TPVs that exhibit up to 44% efficiency under 1435°C blackbody illumination. The air-bridge design leads to near-unity reflectance (97-99%) of out-of-band photons for ternary and quaternary TPVs whose bandgaps range from 0.74 to 1.1 eV. These results suggest the applicability of the air-bridge cells to a range of semiconductor systems suitable for electricity generation from thermal sources found in both consumer and industrial applications, including thermal batteries. 

   more » « less