skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Composites retard hydrolytic crack growth
Degradable polymers are under intense development for sustainability and healthcare. Evidence has accumulated that the chemical reaction that decomposes a polymer an also grow a crack. Even under a small load, the crack speed can be orders of magnitude higher than the overall rate of degradation, leading to premature failure. Here, we demonstrate that a crack slows down markedly in a composite of two degradable materials. In a homogeneous degradable material, the stress concentrates at the crack tip, so that a relatively small applied stretch induces a high stress and a high rate of reaction. The fracture behavior of a composite that consists of two degradable materials, a stiff material for the fibers and a compliant material for the matrix, with strong adhesion between both, is different: The soft matrix blunts the crack and distributes the stresses at the crack tip over a long length of the fibers. The same rate of reaction requires a larger applied stretch. This stress de-concentration retards crack growth in the composite. We demonstrate this concept using a composite made of stiff polydimethylsiloxane (PDMS) fibers in a soft PDMS matrix. In the presence of water molecules in the environment, siloxane bonds in the PDMS hydrolyze, causing hydrolytic crack growth. We show that a hydrolytic crack grows much more slowly in a PDMS composite than in homogeneous PDMS, and may even arrest in the composite. It is hoped that this concept will contribute to the development of degradable materials that resist premature failure.  more » « less
Award ID(s):
2011754
PAR ID:
10501579
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Extreme Mechanics Letters
Volume:
48
Issue:
C
ISSN:
2352-4316
Page Range / eLocation ID:
101433
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, Physical Review E)
    Polyurethane (PU) elastomers are among the most used rubberlike materials due to their combined merits, including high abrasion resistance, excellent mechanical properties, biocompatibility, and good processing performance. A PU elastomer exhibits pronounced hysteresis, leading to a high toughness on the order of 104 J/m2. However, toughness gained from hysteresis is ineffective to resist crack growth under cyclic load, causing a fatigue threshold below 100 J/m2. Here we report a fatigue-resistant PU fiber–matrix composite, using commercially available Spandex as the fibers and PU elastomer as the matrix. The Spandex fibers are stiff, strong, and stretchable. The matrix is soft, tough, and stretchable. We describe a pullout test to measure the adhesion toughness between the fiber and matrix. The test is highly reproducible, showing an adhesion toughness of 3170 J/m2. The composite shows a maximum stretchability of 6.0, a toughness of 16.7 kJ/m2, and a fatigue threshold of 3900 J/m2. When a composite with a precut crack is stretched, the soft matrix causes the crack tip to blunt greatly, which distributes high stress over a long segment of the Spandex fiber ahead the crack tip. This deconcentration of stress makes the composite resist the growth of cracks under monotonic and cyclic loads. The PU elastomer composites open doors for realistic applications of fatigue-resistant elastomers 
    more » « less
  2. ; ; (, Soft Matter)
    In this work, we report 3D printable soft composites that are simultaneously stretchable and tough. The matrix of the composite consists of polydimethylsiloxane containing octuple hydrogen bonding sites, resulting in a material significantly tougher than conventional polydimethylsiloxane. Short glass fibers are also added to the material. Prior to solvent evaporation, the material possesses a viscoelastic yield stress making it suitable for printing via direct ink writing. We mechanically characterize the printed composite, including fracture tests. We observe robust crack deflection and delay of catastrophic failure, leading to measured toughness values up to 2 00 000 J m −2 for specimens with 5 vol% glass fibers. The printed composites exhibit an unprecedented combination of stiffness, stretchability, and toughness. 
    more » « less
  3. ; ; ; ; ; (, Soft Matter)
    null (Ed.)
    Fibrillar adhesives composed of fibers with non-circular cross-sections and contacts, including squares and rectangles, offer advantages that include a larger real contact area when arranged in arrays and simplicity in fabrication. However, they typically have a lower adhesion strength compared to circular pillars due to a stress concentration at the corner of the non-circular contact. We investigate the adhesion of composite pillars with circular, square and rectangular cross-sections each consisting of a stiff pillar terminated by a thin compliant layer at the tip. Finite element mechanics modeling is used to assess differences in the stress distribution at the interface for the different geometries and the adhesion strength of different shape pillars is measured in experiments. The composite fibrillar structure results in a favorable stress distribution on the adhered interface that shifts the crack initiation site away from the edge for all of the cross-sectional contact shapes studied. The highest adhesion strength achieved among the square and rectangular composite pillars with various tip layer thicknesses is approximately 65 kPa. This is comparable to the highest strength measured for circular composite pillars and is about 6.5× higher than the adhesion strength of a homogenous square or rectangular pillar. The results suggest that a composite fibrillar adhesive structure with a local stress concentration at a corner can achieve comparable adhesion strength to a fibrillar structure without such local stress concentrations if the magnitude of the corner stress concentrations are sufficiently small such that failure does not initiate near the corners, and the magnitude of the peak interface stress away from the edge and the tip layer thickness are comparable. 
    more » « less
  4. ; ; ; ; ; ; ; (, Advanced Materials Technologies)
    The field of soft wearable bioelectronics requires materials that are flexible, stretchable, biocompatible, and capable of being used over long durations. Although polydimethylsiloxane (PDMS) is one of the most commonly used substrates for these devices due to its biomimetic properties compared to biological tissues, its intrinsic hydrophobicity causes it to underperform in biological environments. In this work, a hydrophilic, stretchable PDMS electrospun fibrous mat is developed to overcome this limitation by incorporating the amphiphilic polymer polyethylene glycol block copolymer (PEG‐BCP) into the porous PDMS matrix. The nonwoven hydrophilic silicone mat shows apparent improvement in stable hydrophilicity, indicated by a significant decrease in water contact angle (from 125° to 51°) for 7 days, along with improved cellular adhesion and enhanced breathability. The PDMS‐PEG fibers show higher cell proliferation than unmodified PDMS fibers, suggesting potential for long‐term biological applications. The fibrous mat also maintains its structural integrity under mechanical stress, demonstrated by a stretchability of up to 308.8% strain with reduced adhesion forces. This novel material surpasses previous PDMS fibrous substrates and enables electroless gold plating, providing a promising future for wearable fibrous electronics and biomedical devices featuring hydrophilic, stretchable, conductive, and biointegrated materials. 
    more » « less
  5. ; ; ; (, Experimental mechanics)
    Though they share the similarity of inducing material failure at a crack tip, the cutting and tearing energies of soft materials cannot be quantitatively related to one another. One of the reasons for this lack of understanding comes from additional complications that arise during standard cutting techniques. Decades ago, Lake and Yeoh [Int. J. of Fracture, 1978] described a natural rubber cutting method that uses a `Y-shaped' sample geometry to mitigate several of these challenges, including minimizing friction and controlling the strain energy available to drive fracture. The latter, understood via a fracture mechanics framework, enables relative tuning between a tearing contribution to the cutting energy and a cutting contribution. In this manuscript, we extend Lake and Yeoh's largely unreplicated results to softer, more highly deformable polydimethylsiloxane (PDMS) materials. The range of applicability of this technique to variations in material response, sample geometry, boundary conditions, and cutting rate is large. We utilize this flexibility to describe factors leading to the onset of a material-dependent, stick-slip cutting response, which occurs at low cutting rates and high tearing contributions. Furthermore, variation in cutting blade radius reveals a minimum cutting energy threshold even for blades with radii on the order of a few tens of nanometers. For blunter blades, cutting energy reflects the effects of material strain-stiffening. These results establish the Y-shaped cutting geometry as a useful tool in the study of soft fracture. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email