An official website of the United States government
Abstract The hydrogenolysis of polymers is emerging as a promising approach to deconstruct plastic waste into valuable chemicals. Yet, the complexity of plastic waste, including multilayer packaging, is a significant barrier to handling realistic waste streams. Herein, we reveal fundamental insights into a new chemical route for transforming a previously unaddressed fraction of plastic waste – poly(ethylene‐co‐vinyl alcohol) (EVOH) and related polymer blends – into alkane products. We report that Ru/ZrO2is active for the concurrent hydrogenolysis, hydrogenation, and hydrodeoxygenation of EVOH and its thermal degradation products into alkanes (C1−C35) and water. Detailed reaction data, product analysis, and catalyst characterization reveal that the in‐situ thermal degradation of EVOH forms aromatic intermediates that are detrimental to catalytic activity. Increased hydrogen pressure promotes hydrogenation of these aromatics, preventing catalyst deactivation and improving alkane product yields. Calculated apparent rates of C−C scission reveal that the hydrogenolysis of EVOH is slower than low‐density polyethylene. We apply these findings to achieve hydrogenolysis of EVOH/polyethylene blends and elucidate the sensitivity of hydrogenolysis catalysts to such blends. Overall, we demonstrate progress towards efficient catalytic processes for the hydroconversion of waste multilayer film plastic packaging into valuable products.
more »
« less
Compositional analysis of multilayered plastic constituents and constituent mixtures using benchtop 1 H NMR spectroscopy
Abstract Multilayered plastics are widely used in food packaging and other commercial applications due to their tailored functional properties. By layering different polymers, the multilayered composite material can have enhanced mechanical, thermal, and barrier properties compared to a single plastic. However, there is a significant need to recycle these multilayer plastics, but their complex structure offers significant challenges to their successful recycling. Ultimately, the use and recycling of these complex materials requires the ability to characterize the composition and purity as a means of quality control for both production and recycling processes. New advances and availability of low‐field benchtop1H NMR spectrometers have led to increasing interest in its use for characterization of multicomponent polymers and polymer mixtures. Here, we demonstrate the capability of low‐field benchtop1H NMR spectroscopy for characterization of three common polymers associated with multilayered packaging systems (low‐density polyethylene [LDPE], ethylene vinyl alcohol [EVOH], and Nylon) as well as their blends. Calibration curves are obtained for determining the unknown composition of EVOH and Nylon in multilayered packaging plastics using both the EVOH hydroxyl peak area and an observed peak shift, both yielding results in good agreement with the prepared sample compositions. Additionally, comparison of results extracted for the same samples characterized by our benchtop spectrometer and a 500‐MHz spectrometer found results to be consistent and within 2 wt% on average. Overall, low‐field benchtop1H NMR spectroscopy is a reliable and accessible tool for characterization of these polymer systems.
more »
« less
- Award ID(s):
- 2132093
- PAR ID:
- 10504340
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Magnetic Resonance in Chemistry
- Volume:
- 62
- Issue:
- 8
- ISSN:
- 0749-1581
- Format(s):
- Medium: X Size: p. 619-628
- Size(s):
- p. 619-628
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Renewable nanocellulose materials received increased attention owing to their small dimensions, high specific surface area, high mechanical characteristics, biocompatibility, and compostability. Nanocellulose coatings are among many interesting applications of these materials to functionalize different by composition and structure surfaces, including plastics, polymer coatings, and textiles with broader applications from food packaging to smart textiles. Variations in porosity and thickness of nanocellulose coatings are used to adjust a load of functional molecules and particles into the coatings, their permeability, and filtration properties. Mechanical stability of nanocellulose coatings in a wet and dry state are critical characteristics for many applications. In this work, nanofibrillated and nanocrystalline cellulose coatings deposited on the surface of polymer films and textiles made of cellulose, polyester, and nylon are studied using atomic force microscopy, ellipsometry, and T-peel adhesion tests. Methods to improve coatings’ adhesion and stability using physical and chemical cross-linking with added polymers and polycarboxylic acids are analyzed in this study. The paper reports on the effect of the substrate structure and ability of nanocellulose particles to intercalate into the substrate on the coating adhesion.more » « less
-
Abstract ortho‐Phenylenes are one of the simplest classes of aromatic foldamers, adopting helical geometries because of aromatic stacking interactions. The folding and misfolding ofortho‐phenylenes are slow on the NMR timescale at or below room temperature, allowing detection of folding states using1H NMR spectroscopy. Herein, anortho‐phenylene hexamer is coupled with a RAFT chain transfer agent (CTA) on each repeat unit. A variety of acrylic monomers are polymerized onto the CTA‐functionalizedortho‐phenylene using PET‐RAFT to yield functionalized star polymers withortho‐phenylene cores. The steric bulk of the acrylate monomer units as well as the chain length of each arm of the star polymer is varied.1H NMR spectroscopy shows that the folding of theortho‐phenylenes do not vary, providing a robust helical core for star polymer systems.more » « less
-
Abstract Optical polymer‐based integrated photonic devices are gaining interest for applications in optical packaging, biosensing, and augmented/virtual reality (AR/VR). The low refractive index of conventional organic polymers has been a barrier to realizing dense, low footprint photonic devices. The fabrication and characterization of integrated photonic devices using a new class of high refractive index polymers, chalcogenide hybrid inorganic/organic polymers (CHIPs), which possess high refractive indices and lower optical losses compared to traditional hydrocarbon‐based polymers, are reported. These optical polymers are derived from elemental sulfur via the inverse vulcanization process, which allows for inexpensive monomers to be used for these materials. A facile fabrication strategy using CHIPs via lithography is described for single‐mode optical waveguides, Y junction splitters, multimode interferometers (MMIs), and high Q factor ring resonators, along with device characterization. Furthermore, propagation losses of 0.4 dB cm−1near 1550 nm wavelength, which is the lowest measured loss in non‐fluorinated optical polymer waveguides, coupled with the benefits of low cost materials and manufacturing are reported. Ring resonators with Q factor on the order of 6 × 104and cavity finesse of 45, which are some of the highest values reported for optical polymer‐based ring resonators, are also reported.more » « less
