More Like this

1. RF Injection Locking of THz Metasurface Quantum‐Cascade VECSEL

   https://doi.org/10.1002/lpor.202300007  

   Wu, Yu; Curwen, Christopher A.; Shahili, Mohammad; Reno, John L.; Williams, Benjamin S. (August 2023, Laser & Photonics Reviews)

   Abstract Radiofrequency (RF) injection locking and spectral broadening of a terahertz (THz) quantum‐cascade vertical‐external‐cavity surface‐emitting laser (QC‐VECSEL) is demonstrated. An intracryostat VECSEL focusing cavity design is used to enable continuous‐wave lasing with a cavity length over 30 mm, which corresponds to a round‐trip frequency near 5 GHz. Strong RF current modulation is injected to the QC‐metasurface electrical bias to pull and lock the round‐trip frequency. The injection locking range at various RF injection powers is recorded and compared with the injection locking theory. Moreover, the lasing spectrum broadens from 14 GHz in free‐running mode to a maximum spectral width around 110 GHz with 20 dBm of injected RF power. This experimental setup is suitable for further exploration of active mode‐locking and picosecond pulse generation in THz QC‐VECSELs. 

   more » « less
2. Self-sensing of Dielectric Tubular Actuator and Its Validation in Feedback Control

   https://doi.org/10.1109/AIM43001.2020.9158899  

   Wang, Shengbin; Kaaya, Theophilus; Chen, Zheng (July 2020, 2020 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM))

   null (Ed.)

   Dielectric elastomer (DE) materials, a category of electroactive polymers, can be used to design actuators that are flexible, resilient, lightweight, and durable. However, due to the uncertainties in its actuation dynamics, DE actuators always rely on feedback control to perform accurate and safe operations. In this paper, a tubular dielectric elastomer actuator (DEA) with self-sensing capability is developed. It does not require external devices to measure displacement for feedback control. The displacement of the actuator is controlled using a proportional-integral controller with the capacitance measured at high probing frequency as the self-sensing mechanism component of the actuator. By superimposing actuation and probing voltage and applying them to the DE tube, the actuation voltage activates the movement of the DE tube and the probing voltage is used for self-sensing. Fast Fourier Transform (FFT) is then used to filter a given frequency of the probing current and voltage and then calculate the capacitance from the probing current and voltage during each time window. With the relationship between capacitance and displacement of the DE tube, the displacement output is estimated online and self-sensing without an external sensor is achieved. The self-sensing signal is then used as a feedback signal in a closed-loop design to follow a reference signal for tracking. The experimental results validate the self-sensing of the DE actuator in feedback control. 

   more » « less
3. Cavity-Assisted Coherent Phonon Generation and Control in a WSe ₂ /Au Structure

   https://doi.org/10.1021/acs.jpclett.5c01190  

   Brennan, Christian; Jo, Kiyoung; Wang, Chih-Feng; Joly, Alan G; O’Callahan, Brian T; Farias, William Edward; Bielicki, Alexander Donald; Teklu, Alem; Shi, Leilei; Zhang, Qian; et al (June 2025, The Journal of Physical Chemistry Letters)

   Coherent phonons in the Terahertz (THz) regime have gained attention as potential candidates for next-generation high-speed, low-energy information carriers in atomically thin phononic or phonon-integrated on-chip devices. Nevertheless, achieving efficient control of the phonon generation dynamics over THz coherent phonons continues to pose a considerable challenge. In this work, we explore THz coherent phonon generation in exfoliated van der Waals (vdW) flakes of WSe2 on Au (WSe2/Au) and Si (WSe2/Si) by using time-resolved pump–probe spectroscopy. The generation of THz coherent phonons was studied as a function of the WSe2 layer thickness and laser wavelength. Notably, a significant enhancement in THz coherent phonon generation was observed in the WSe2/Au structure, but only within a specific range of WSe2 thicknesses and laser wavelengths. The results from numerical simulations, which consider a self-hybridized optical cavity depending on WSe2 thickness and optical reflectance and Raman spectroscopy measurements, all align well with the time-domain observations of THz coherent phonon generation. We propose that the observed enhancement in THz coherent phonon generation is strongly influenced by light–matter interactions in the WSe2 cavity, a mechanism that may be applicable to a broader range of vdW materials. These findings offer promising insights for the development of THz phononic or phonon-integrated devices. 

   more » « less
4. Integrating planar circuits with superconducting 3D microwave cavities using tunable low-loss couplers

   https://doi.org/10.1063/5.0153936  

   Zhao, Ziyi; Gurra, Eva; Rosenthal, Eric I; Vale, Leila R; Hilton, Gene C; Lehnert, K W (July 2023, Applied Physics Letters)

   We design and test a low-loss interface between superconducting three-dimensional microwave cavities and two-dimensional circuits, where the coupling rate is highly tunable. This interface seamlessly integrates a loop antenna and a Josephson junction-based coupling element. We demonstrate that the loss added by connecting this interface to the cavity is 1.28 kHz, corresponding to an inverse quality factor of 1/(4.5×106). Furthermore, we show that the cavity's external coupling rate to a 50 Ω transmission line can be tuned from negligibly small to over 3 orders of magnitude larger than its internal loss rate in a characteristic time of 3.2 ns. This switching speed does not impose additional limits on the coupling rate because it is much faster than the coupling rate. Moreover, the coupler can be controlled by low frequency signals to avoid interference with microwave signals near the cavity or qubit frequencies. Finally, the coupling element introduces a 0.04 Hz/photon self-Kerr nonlinearity to the cavity, remaining linear in high photon number operations. 

   more » « less
5. Room temperature terahertz semiconductor frequency comb

   https://doi.org/10.1038/s41467-019-10395-7  

   Lu, Quanyong; Wang, Feihu; Wu, Donghai; Slivken, Steven; Razeghi, Manijeh (December 2019, Nature Communications)

   Abstract A terahertz (THz) frequency comb capable of high-resolution measurement will significantly advance THz technology application in spectroscopy, metrology and sensing. The recently developed cryogenic-cooled THz quantum cascade laser (QCL) comb has exhibited great potentials with high power and broadband spectrum. Here, we report a room temperature THz harmonic frequency comb in 2.2 to 3.3 THz based on difference-frequency generation from a mid-IR QCL. The THz comb is intracavity generated via down-converting a mid-IR comb with an integrated mid-IR single mode based on distributed-feedback grating without using external optical elements. The grating Bragg wavelength is largely detuned from the gain peak to suppress the grating dispersion and support the comb operation in the high gain spectral range. Multiheterodyne spectroscopy with multiple equally spaced lines by beating it with a reference Fabry-Pérot comb confirms the THz comb operation. This type of THz comb will find applications to room temperature chip-based THz spectroscopy. 

   more » « less