skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • High Sensitivity and Ultra‐Broad‐Range NH 3 Sensor Arrays by Precise Control of Step Defects on The Surface of Cl 2 ‐Ndi Single Crystals
Title: High Sensitivity and Ultra‐Broad‐Range NH 3 Sensor Arrays by Precise Control of Step Defects on The Surface of Cl 2 ‐Ndi Single Crystals
Abstract Vapor sensors with both high sensitivity and broad detection range are technically challenging yet highly desirable for widespread chemical sensing applications in diverse environments. Generally, an increased surface‐to‐volume ratio can effectively enhance the sensitivity to low concentrations, but often with the trade‐off of a constrained sensing range. Here, an approach is demonstrated for NH3sensor arrays with an unprecedentedly broad sensing range by introducing controllable steps on the surface of an n‐type single crystal. Step edges, serving as adsorption sites with electron‐deficient properties, are well‐defined, discrete, and electronically active. NH3molecules selectively adsorb at the step edges and nearly eliminate known trap‐like character, which is demonstrated by surface potential imaging. Consequently, the strategy can significantly boost the sensitivity of two‐terminal NH3resistance sensors on thin crystals with a few steps while simultaneously enhancing the tolerance on thick crystals with dense steps. Incorporation of these crystals into parallel sensor arrays results in ppb–to–% level detection range and a convenient linear relation between sheet conductance and semi‐log NH3concentration, allowing for the precise localization of vapor leakage. In general, the results suggest new opportunities for defect engineering of organic semiconductor crystal surfaces for purposeful vapor or chemical sensing.  more » « less
Award ID(s):
2011401
PAR ID:
10506654
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Publisher / Repository:
Adv. Sci.
Date Published:
Journal Name:
Advanced Science
Volume:
11
Issue:
14
ISSN:
2198-3844
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Advanced Materials Technologies)
    Abstract Operational stability and sensitivity are key issues for the practical application of organic field‐effect‐transistor (OFET)‐based sensors. Instability over time due to intrinsic device bias stress and conductance drift induced by the ambient environment can obscure responses to analytes of interest. These instabilities are well‐known hindrances to the practical application of OFET sensors. It is demonstrated for the first time that an innovative and simple two‐OFET circuit design can effectively compensate the drifts originating from bias stress and/or the environment while maintaining chemical sensitivity and increasing signal‐to‐noise ratio. This is enabled by illumination of one photosensitive OFET to compensate the drift of the other chemical‐sensing OFET, though in principle a pair of OFETs with opposing drifts generated by any mechanism could be used. The circuit, compared with individual OFET‐based sensors, achieves significantly increased environmental stability, and its enhanced response to chemical vapors is also demonstrated by detecting the representative pollutants nitrogen dioxide (NO2) and ammonia (NH3). This shows that OEFTs with drifts being compensated by any mechanism can lead to stabilized sensor circuits. 
    more » « less
  2. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract Flexible and wearable sensors show enormous potential for personalized healthcare devices by real‐time monitoring of an individual's health. Typically, a single functional material is selected for one sensor to sense a particular physical signal while multiple materials will be selected for multi‐mode sensing. Vertically aligned nanocomposites (VANs) have recently demonstrated various material combinations and novel coupled multifunctionalities that are hard to achieve in any single‐phase material alone, including multiphase multiferroics, magneto‐optic coupling, and strong magnetic and optical anisotropy. Integrating these novel VANs into wearable sensors shows enormous potential in multi‐mode sensing owing to their multifunctional nature. In this work, the transfer of VANs onto polydimethylsiloxane as a novel flexible chemical and pressure sensor is demonstrated. For this demonstration, the classical BaTiO3‐Au VAN with combined plasmonic and piezoelectric properties is used to demonstrate a multi‐sensing mechanism. A thin water‐soluble buffer of Sr3Al2O6serves as a buffer layer for the epitaxial growth and transfer process. The electrical output based on the piezoelectric responses and identifying 4‐mercaptobenzoic acid by surface‐enhanced Raman spectroscopy reveal great potential for free‐standing VANs in a wearable multifunctional sensing platform. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Sensor Research)
    Abstract The chemical composition of growing media is a key factor for plant growth, impacting agricultural yield and sustainability. However, there is a lack of affordable chemical sensors for ubiquitous nutrient ion monitoring in agricultural applications. This work investigates using fully printed ion‐sensor arrays to measure the concentrations of nitrate, ammonium, and potassium in mixed‐electrolyte media. Ion sensor arrays composed of nitrate, ammonium, and potassium ion‐selective electrodes and a printed silver‐silver chloride (Ag/AgCl) reference electrode are fabricated and characterized in aqueous solutions in a range of concentrations that encompass what is typical for agricultural growing media (0.01 mm–1m). The sensors are also tested in mixed‐electrolyte solutions of NaNO3, NH4Cl, and KCl of varying concentrations, and the recorded potentials are input into Nernstian and artificial neural network models to compare the prediction accuracy of the models against ground truth. The artificial neural network models demonstrated higher accuracy over the Nernstian model, and the model using only ion‐sensor inputs is 7.5% more accurate than the Nernstian model under the same conditions. By enabling more precise and efficient fertilizer application, these sensor arrays coupled to computational models can help increase crop yields, optimize resource use, and reduce environmental impact. 
    more » « less
  4. ; ; ; ; ; ; ; (, Advanced Materials Technologies)
    Abstract Complex graphene electrode fabrication protocols including conventional chemical vapor deposition and graphene transfer techniques as well as more recent solution‐phase printing and postprint annealing methods have hindered the wide‐scale implementation of electrochemical devices including solid‐state ion‐selective electrodes (ISEs). Herein, a facile graphene ISE fabrication technique that utilizes laser induced graphene (LIG), formed by converting polyimide into graphene by a CO2laser and functionalization with ammonium ion (NH4+) and potassium ion (K+) ion‐selective membranes, is demonstrated. The electrochemical LIG ISEs exhibit a wide sensing range (0.1 × 10−3–150 × 10−3mfor NH4+and 0.3 × 10−3–150 × 10−3mfor K+) with high stability (minimal drop in signal after 3 months of storage) across a wide pH range (3.5–9.0). The LIG ISEs are also able to monitor the concentrations of NH4+and K+in urine samples (29–51% and 17–61% increase for the younger and older patient; respectively, after dehydration induction), which correlate well with conventional hydration status measurements. Hence, these results demonstrate a facile method to perform in‐field ion sensing and are the first steps in creating a protocol for quantifying hydration levels through urine testing in human subjects. 
    more » « less
  5. ; ; ; (, Microsystems & Nanoengineering)
    Abstract Current potentiometric sensing methods are limited to detecting nitrate at parts-per-billion (sub-micromolar) concentrations, and there are no existing potentiometric chemical sensors with ultralow detection limits below the parts-per-trillion (picomolar) level. To address these challenges, we integrate interdigital graphene ion-sensitive field-effect transistors (ISFETs) with a nitrate ion-sensitive membrane (ISM). The work aims to maximize nitrate ion transport through the nitrate ISM, while achieving high device transconductance by evaluating graphene layer thickness, optimizing channel width-to-length ratio (RWL), and enlarging total sensing area. The captured nitrate ions by the nitrate ISM induce surface potential changes that are transduced into electrical signals by graphene, manifested as the Dirac point shifts. The device exhibits Nernst response behavior under ultralow concentrations, achieving a sensitivity of 28 mV/decade and establishing a record low limit of detection of 0.041 ppt (4.8 × 10−13M). Additionally, the sensor showed a wide linear detection range from 0.1 ppt (1.2 × 10−12M) to 100 ppm (1.2 × 10−3M). Furthermore, successful detection of nitrate in tap and snow water was demonstrated with high accuracy, indicating promising applications to drinking water safety and environmental water quality control. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email