An official website of the United States government
The oxides of platinum group metals are promising for future electronics and spintronics due to the delicate interplay of spin-orbit coupling and electron correlation energies. However, their synthesis as thin films remains challenging due to their low vapour pressures and low oxidation potentials. Here we show how epitaxial strain can be used as a control knob to enhance metal oxidation. Using Ir as an example, we demonstrate the use of epitaxial strain in engineering its oxidation chemistry, enabling phase-pure Ir or IrO2 films despite using identical growth conditions. The observations are explained using a density-functional-theory-based modified formation enthalpy framework, which highlights the important role of metal-substrate epitaxial strain in governing the oxide formation enthalpy. We also validate the generality of this principle by demonstrating epitaxial strain effect on Ru oxidation. The IrO2 films studied in our work further revealed quantum oscillations, attesting to the excellent film quality. The epitaxial strain approach we present could enable growth of oxide films of hard-to-oxidize elements using strain engineering.
more »
« less
Solid-source metal-organic MBE for elemental Ir and Ru films
Thin films of elemental metals play a very important role in modern electronic nano-devices as conduction pathways, spacer layers, spin-current generators/detectors, and many other important functionalities. In this work, by exploiting the chemistry of solid metal-organic source precursors, we demonstrate the molecular beam epitaxy synthesis of elemental Ir and Ru metal thin films. The synthesis of these metals is enabled by thermodynamic and kinetic selection of the metal phase as the metal-organic precursor decomposes on the substrate surface. Film growth under different conditions was studied using a combination of in situ and ex situ structural and compositional characterization techniques. The critical role of substrate temperature, oxygen reactivity, and precursor flux in tuning film composition and quality is discussed in the context of precursor adsorption, decomposition, and crystal growth. Computed thermodynamics quantifies the driving force for metal or oxide formation as a function of synthesis conditions and changes in chemical potential. These results indicate that bulk thermodynamics are a plausible origin for the formation of Ir metal at low temperatures, while Ru metal formation is likely mediated by kinetics.
more »
« less
- Award ID(s):
- 2011401
- PAR ID:
- 10506677
- Publisher / Repository:
- Journal of Vacuum Science & Technology A
- Date Published:
- Journal Name:
- Journal of Vacuum Science & Technology A
- Volume:
- 41
- Issue:
- 6
- ISSN:
- 0734-2101
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Hybrid oxide molecular beam epitaxy (hMBE), a thin-film deposition technique in which transition metal cations are delivered using a metal-organic precursor, has emerged as the state-of-the-art approach to the synthesis of electronic-grade complex oxide films with a stoichiometric growth window. However, numerous questions remain regarding the chemical mechanisms of the growth process and the surface properties of the resulting films. To examine these properties, thin film SrTiO3 (STO) was prepared by hMBE using a titanium tetraisopropoxide (TTIP) precursor for Ti delivery and an elemental Sr source on annealed STO and Nb-doped STO substrates with varying TTIP:Sr flux ratios to examine the conditions for the reported stoichiometric growth window. The films were transferred in vacuo to an x-ray photoelectron spectroscopy system to study the surface elemental composition. Samples were examined using x-ray diffraction to compare our surface sensitive results with previously reported measurements of the bulk of the films in the literature. Ex situ studies by atomic force microscopy, scanning tunneling microscopy, and low-energy electron microscopy confirmed the presence of surface reconstructions and an Ehrlich–Schwoebel barrier consistent with A-site SrO termination. We find that a surface exhibiting a mixture of SrO and TiO2 termination or a full SrO termination is necessary to obtain stoichiometric adsorption-controlled growth. These results indicate that surface Sr is necessary to maintain the chemical equilibrium for stoichiometric growth during the hMBE process, which is important for the design of future interfacial systems using this technique.more » « less
-
Metal-organic framework (MOF) thin films offer exceptional properties for diverse applications, yet the mechanisms underlying MOF crystallization are not fully understood. Knowledge gaps remain regarding the nucleation and growth mechanisms of these highly porous, crystalline materials under dynamic evaporative conditions. Here, an in situ grazing incidence wide-angle X-ray scattering (GIWAXS) combined with a microkinetic model is used to probe the dynamic growth of MOF films. We show that while most high-order oligomers are produced in the solution phase, the key parameters that control thin-film growth are autocatalytic synthesis of secondary building units (SBUs) followed by physisorption on silicon wafer substrate, exponential growth due to evaporation-driven step growth, and transition to the stationary phase due to mass-transfer-limited growth. Importantly, this study demonstrates the applicability of this microkinetic modeling framework to predict film properties across a range of temperatures and reactant concentrations, allowing for rational design of MOF thin films.more » « less
-
4d transition metal oxides have emerged as promising materials for numerous applications including high mobility electronics. SrNbO3 is one such candidate material, serving as a good donor material in interfacial oxide systems and exhibiting high electron mobility in ultrathin films. However, its synthesis is challenging due to the metastable nature of the d1 Nb4+ cation and the limitations in the delivery of refractory Nb. To date, films have been grown primarily by pulsed laser deposition (PLD), but development of a means to grow and stabilize the material via molecular beam epitaxy (MBE) would enable studies of interfacial phenomena and multilayer structures that may be challenging by PLD. To that end, SrNbO3 thin films were grown using hybrid MBE for the first time using a tris(diethylamido)(tert-butylimido) niobium precursor for Nb and an elemental Sr source on GdScO3 substrates. Varying thicknesses of insulating SrHfO3 capping layers were deposited using a hafnium tert-butoxide precursor for Hf on top of SrNbO3 films to preserve the metastable surface. Grown films were transferred in vacuo for x-ray photoelectron spectroscopy to quantify elemental composition, density of states at the Fermi energy, and Nb oxidation state. Ex situ studies by x-ray absorption near edge spectroscopy and scanning transmission electron microscopy illustrate that the SrHfO3 capping plays an important role in preserving the crystalline quality of the material and the Nb 4d1 metastable charge state under atmospheric conditions.more » « less
-
In this work, p-type NiO thin films were grown on (010) β-Ga2O3 substrates via metal–organic chemical vapor deposition (MOCVD). The growth conditions, including Ni(dmamb)2 (Ni precursor) molar flow rate, oxygen flow rate, and growth temperature, were systematically tuned to achieve p-type NiO thin films. With a relatively high O2 flow rate of 10 000 sccm, the grown NiO film exhibited smooth surface morphologies with a root mean square roughness value of 2.39 nm. The measured hole concentration ranged from 1 × 1016 to 4.5 × 1016 cm−3, with room-temperature mobility varying between 3 and 1.7 cm2/V s. Cross-sectional scanning transmission electron microscopy imaging and analysis revealed a NiGa2O4 interfacial layer formed between the p-type NiO thin film and β-Ga2O3 substrate, due to Ni diffusion. Given the challenges of achieving p-type conductivity in β-Ga2O3, NiO has emerged as a potential alternative material. Furthermore, in situ MOCVD grown NiO/β-Ga2O3 heterojunction was used to fabricate PN diodes with two different diameters: 100 and 200 μm. This study represents the first demonstration of all-MOCVD growth of p-NiO/β-Ga2O3 PN diodes on (010) Sn-doped β-Ga2O3 substrates. Compared to radio frequency sputtering and atomic layer deposition of p-NiO, MOCVD allows the continuous growth of p-NiO on top of Ga2O3, which can potentially suppress interface defects and impurity contamination. The breakdown voltages of the MOCVD grown NiO/β-Ga2O3 PN diodes were measured as 348 and 267 V for the 100 and 200 μm diameter devices, respectively. The knee voltages (Vknee) were extracted as 4.7–5.2 V.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1116/6.0002955
