skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Comparing the impact of different adsorbed layers on the local glass transition of polymer matrices
Chain adsorption to nanofiller interfaces creating bound layers has become central to understanding property changes in polymer nanocomposites. We determine the impact different kinds of adsorbed layers can have on the local glass transition temperature Tg of polymer matrices in a model film system using a localized fluorescence method. This work compares the adsorption and desorption of adsorbed layers grown in solution with the solution washing characteristics of adsorbed layers formed in the melt, leveraging knowledge about polymer adsorption in solution to infer the structure of adsorbed layers formed in the melt. In the limit of zero concentration after a long time in solution, we find that both kinds of adsorbed layers reach the same limiting adsorbed amount h∞(c → 0) ≈ 1 nm, appearing to evolve to the same thermodynamic equilibrium state of a near monolayer of surface coverage. We propose that melt annealing leads to a coarsening of polymer segment–surface contacts, increasing the length of trains and shrinking loops and tails, slowing the subsequent kinetics of these adsorbed chains in solution. Considering how the pyrene-labeled chains intermix with the adsorbed layer enables us to discriminate between the impact of tails, loops, and trains as threading of loops takes longer. We find that large fluffy loops, tails, and trains have little to no impact on the local Tg. A large 30 K increase in local Tg is observed for 30-min solvent washed well-annealed films at long intermixing times that we attribute to the threading of small tight loops.  more » « less
Award ID(s):
1905782 1709132
PAR ID:
10509983
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
AIP Publishing
Date Published:
Journal Name:
The Journal of Chemical Physics
Volume:
160
Issue:
4
ISSN:
0021-9606
Page Range / eLocation ID:
044908
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Soft Matter)
    Recent studies suggest chain adsorption in the melt may be responsible for a number of property changes in thin films by making correlations between the residual adsorbed layer thickness h ads ( t ) measured after a given solvent washing procedure as a function of annealing time t of the film at an elevated temperature prior to this solvent rinse. This procedure, frequently called “Guiselin's experiment”, refers to the thought experiment proposed in a 1992 theoretical treatment by Guiselin that assumed chain segments in contact with the surface are irreversibly adsorbed whereby unadsorbed chains could be washed away by solvent without disturbing the adsorbed substrate contact points in the melt. In the present work, we review this recent literature, identifying and experimentally testing a common protocol for forming adsorbed layers h ads ( t ) from solvent washing melt films. We find h ads ( t ) curves to be far less reproducible and reliable than implied in the literature, strongly dependent on solvent washing and substrate cleaning conditions, and annealing at elevated temperatures is unnecessary as densification of films sitting at room temperature makes the glassy film harder to wash off, leaving behind h ads of comparable thickness. This review also summarizes literature understanding developed over several decades of study on polymer adsorption in solution, which experimentally demonstrated that polymer chains in solution are highly mobile, diffusing and exchanging on the surface even in the limit of strong adsorption, contradicting Guiselin's assumption. Preformed adsorbed layers of different thicknesses h ads are shown to not affect the average glass transition temperature or physical aging of 30 nm thick films. In summary, a number of open questions and implications are discussed related to thin films and polymer nanocomposites. 
    more » « less
  2. ; ; ; ; (, Soft Matter)
    It is well-known that particle–polymer interactions strongly control the adsorption and conformations of adsorbed chains. Interfacial layers around nanoparticles consisting of adsorbed and free matrix chains have been extensively studied to reveal their rheological contribution to the behavior of nanocomposites. This work focuses on how chemical heterogeneity of the interfacial layers around the particles governs the microscopic mechanical properties of polymer nanocomposites. Low glass-transition temperature composites consisting of poly(vinyl acetate) coated silica nanoparticles in poly(ethylene oxide) and poly(methyl acrylate) matrices, and of poly(methyl methacrylate) silica nanoparticles in a poly(methyl acrylate) matrix are examined using rheology and X-ray photon correlation spectroscopy. We demonstrate that miscibility between the adsorbed and matrix chains in the interfacial layers led to the observed unusual reinforcement. We suggest that packing of chains in the interfacial regions may also contribute to the reinforcement in the polymer nanocomposites. These features may be used in designing mechanically adaptive composites operating at varying temperature. 
    more » « less
  3. ; ; ; ; ; ; ; (, Nature Communications)
    Abstract Adsorption plays vital roles in many processes including catalysis, sensing, and nanomaterials design. However, quantifying molecular adsorption, especially at the nanoscale, is challenging, hindering the exploration of its utilization on nanomaterials that possess heterogeneity across different length scales. Here we map the adsorption of nonfluorescent small molecule/ion and polymer ligands on gold nanoparticles of various morphologies in situ under ambient solution conditions, in which these ligands are critical for the particles’ physiochemical properties. We differentiate at nanometer resolution their adsorption affinities among different sites on the same nanoparticle and uncover positive/negative adsorption cooperativity, both essential for understanding adsorbate-surface interactions. Considering the surface density of adsorbed ligands, we further discover crossover behaviors of ligand adsorption between different particle facets, leading to a strategy and its implementation in facet-controlled synthesis of colloidal metal nanoparticles by merely tuning the concentration of a single ligand. 
    more » « less
  4. ; ; (, APS)
    Chain entanglements play a crucial role in polymer crystallization, yet their effects on crystallization remain not fully understood. Freeze-drying is one way to potentially preserve disentangled states of long polymer chains. In fact, it is known that freeze-drying (FD) significantly accelerates the crystallization kinetics of semicrystalline polymers. However, the chain-level structure of the FD polymer chains without a long-range order (glass) has been a debatable matter. In this study, we investigate the effect of freeze-drying on single chain-level structures of 13CH3 enriched poly(L-lactic Acid) and 13CH enriched poly(D-lactic acid) racemate by using 1H-1H spin diffusion via 13C detection solid-state NMR spectroscopy. Spatial distributions of PLLA and PDLA glassy chains in the range of a few Å – 30 nm are evaluated via 1H-1H spin diffusion. This analysis provides core-shell morphology of single chains where the outer shell layers include both PDLA and PLLA mixture and the inner core possess a single component. 
    more » « less
  5. ; ; (, Journal of Polymer Science Part B: Polymer Physics)
    ABSTRACT The thermomechanical behavior of polymer nanocomposites is mostly governed by interfacial properties which rely on particle–polymer interactions, particle loading, and dispersion state. We recently showed that poly(methyl methacrylate) (PMMA) adsorbed nanoparticles in poly(ethylene oxide) (PEO) matrices displayed an unusual thermal stiffening response. The molecular origin of this unique stiffening behavior resulted from the enhanced PEO mobility within glassy PMMA chains adsorbed on nanoparticles. In addition, dynamic asymmetry and chemical heterogeneities existing in the interfacial layers around particles were shown to improve the reinforcement of composites as a result of good interchain mixing. Here, the role of chain rigidity in this interfacially controlled reinforcement in PEO composites is investigated. We show that particles adsorbed with less rigid polymers improve the mechanical properties of composites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys.2019,57, 9–14 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email