An official website of the United States government
Capacitive sensing technology is widely applied in ubiquitous sensing. Its low-power consumption enables it to be used in a wide variety of Industry 4.0 applications. Capacitive Sensors can be combined into Arrays (CSAs) with mutual capacitive sensing to reduce external wiring requirements. For instance, the Texas Instruments (TI) MSP430FR2676 can capture and process data from 8×8 capacitive sensor grids. However, it is limited to supporting only 64 sensors. We propose a design incorporating daisy-chaining of CSAs via the I2C serial protocol to enable support for 256 sensors. We also demonstrate a rapid prototyping implementation of 128 sensors. The extended work we plan is to implement the prototype on custom Printed Circuit Boards (PCB) and maximize data update frequency. This architecture can find relevance in industries like manufacturing and farming, enhancing precision in the interaction between robots and humans/objects.
more »
« less
Towards Sustainable and Efficient Rapid Prototyping of Capacitive Sensor Arrays
Capacitive sensors are common ubiquitous sensing devices that permeate through many industries. The overwhelming majority of touchscreens use capacitive sensor arrays for the precise detection of touch. Many MEMS sensors use capacitance as the variable that is manipulated to detect the sensed parameter (e.g. accelerometers). However, the use of non-rigid, ambient, or custom capacitive sensor arrays has not seen the same level of adoption. CSAs (capacative sensor arrays) can be made from a wide array of materials and techniques-including 3d printing and laser ablation-to rapidly create CSAs that can be custom fit to enable proximity, force, and touch detection. This work investigates some of these materials and how they can be fabricated in a laboratory environment with a single robotic arm.
more »
« less
- Award ID(s):
- 2237945
- PAR ID:
- 10510381
- Publisher / Repository:
- IEEE
- Date Published:
- ISBN:
- 979-8-3503-0858-7
- Page Range / eLocation ID:
- 164 to 165
- Format(s):
- Medium: X
- Location:
- Springdale, AR, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Human–machine interface requires various sensors for communication, manufacturing and environmental control, and health and safety monitoring. Capacitive sensors have been used to detect touch, distance, geometry, electric property, and environmental parameters. However, highly sensitive proximity detection with a small form factor has always been a challenge. This paper presents a capacitive sensor composed of a nanostructured electrode array for contact and noncontact detection. In the sensor configuration, the nanostructured electrode is made of high aspect ratio cellulose fibers embedded with carbon nanotubes. The complementary electrode is designed to be smaller in surface area for high sensitivity. Based on the analysis, the unique sensing mechanism is shown to enhance the proximity sensitivity for target detection. A pair of asymmetrically designed electrodes are characterized and compared with the traditional symmetric electrodes for proximity and contact detection of human hands. The sensor performance is also characterized for detecting water mass in glass and metal cups. In the end, a smart pad that can recognize human gestures, gait, and water mass with unprecedented sensitivity is demonstrated.more » « less
-
ABSTRACT This paper discusses new components and approaches to make stretchable optical fiber sensors better meet the power and washability requirements of wearables. First, an all-polymer quick connector allows the light source and photosensor to be quickly detached for washing. Second, the paper investigates the possibility of driving the sensors using ambient light instead of an onboard light source. While optical strain sensors and touch sensors have advantages over electronic ones in wet environments, and the intrinsic stretchability of the fibers is useful for soft robotics and highly conformal wearables, the typical light-emitting diode (LED) light source consumes more power than an electronic resistive or capacitive strain sensor. In this work, ambient light of uniform but unknown intensity is demonstrated to drive an elastomeric optical touch sensor in a differential configuration.more » « less
-
Advanced applications for human-robot interaction require perception of physical touch in a manner that imitates the human tactile perception. Feedback generated from tactile sensor arrays can be used to control the interaction of a robot with their environment and other humans. In this paper, we present our efforts to fabricate piezoresistive organic polymer sensor arrays using PEDOT: PSS or poly (3,4-ethylenedioxythiophene)-poly(styrenesulfonate). Sensors are realized as strain-gauges on Kapton substrates with thermal and electrical response characteristics to human touch. In this paper, we detail fabrication processes associated with a Gold etching technique combined with a wet lift-off photolithographic process to implement a circular tree designed sensor microstructure in our cleanroom. The testing of this microstructure is done on a load testing apparatus facilitated by an integrated circuit design. Furthermore, a lamination process is employed to compensate for temperature drift while measuring pressure for double-sided sensor substrates. Experiments carried out to evaluate the performance of the fabricated structure, indicates 100% sensor yields with the updated technique implemented.more » « less
-
Estimating the location of contact is a primary function of artificial tactile sensing apparatuses that perceive the environment through touch. Existing contact localization methods use flat geometry and uniform sensor distributions as a simplifying assumption, limiting their ability to be used on 3D surfaces with variable density sensing arrays. This paper studies contact localization on an artificial skin embedded with mutual capacitance tactile sensors, arranged non-uniformly in an unknown distribution along a semi-conical 3D geometry. A fully connected neural network is trained to localize the touching points on the embedded tactile sensors. The studied online model achieves a localization error of 5.7 ± 3.0 mm. This research contributes a versatile tool and robust solution for contact localization that is ambiguous in shape and internal sensor distribution.more » « less
