An official website of the United States government
We conduct molecular dynamics simulations of a bidisperse Kob–Andersen (KA) glass former, modified to add in additional polydispersity. The original KA system is known to exhibit dynamical heterogeneity. Prior work defined propensity, the mean motion of a particle averaged over simulations reconstructing the initial positions of all particles but with randomized velocities. The existence of propensity shows that structure and dynamics are connected. In this paper, we study systems which mimic problems that would be encountered in measuring propensity in a colloidal glass former, where particles are polydisperse (they have slight size variations). We mimic polydispersity by altering the bidisperse KA system into a quartet consisting of particles both slightly larger and slightly smaller than the parent particles in the original bidisperse system. We then introduce errors into the reconstruction of the initial positions that mimic mistakes one might make in a colloidal experiment. The mistakes degrade the propensity measurement, in some cases nearly completely; one no longer has an iso-configurational ensemble in any useful sense. Our results show that a polydisperse sample is suitable for propensity measurements provided one avoids reconstruction mistakes.
more »
« less
Effects of polydispersity on the plastic behaviors of dense two-dimensional granular systems under shear
We study particle-scale motion in sheared highly polydisperse amorphous materials, in which the largest particles are as much as ten times the size of the smallest. We find strikingly different behavior from the more commonly studied amorphous systems with low polydispersity. In particular, an analysis of the nonaffine motion of particles reveals qualitative differences between large and small particles: The smaller particles have dramatically more nonaffine motion, which is induced by the presence of the large particles. We characterize how the nonaffine motion changes from the low- to high-polydispersity regimes. We further demonstrate a quantitative way to distinguish between “large” and “small” particles in systems with broad distributions of particle sizes. A macroscopic consequence of the nonaffine motion is a decrease in the energy dissipation rate for highly polydisperse samples, which is due both to a geometric consequence of the changing jamming conditions for higher polydispersity and to the changing character of nonaffine motion.
more »
« less
- Award ID(s):
- 1804186
- PAR ID:
- 10511079
- Publisher / Repository:
- American Physical Society
- Date Published:
- Journal Name:
- Physical Review E
- Volume:
- 108
- Issue:
- 5
- ISSN:
- 2470-0045
- Page Range / eLocation ID:
- 054605
- Subject(s) / Keyword(s):
- Granular flows Shear flows Glassy systems Polydisperse materials
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
A quasi steady-state model (QSM) for accurately predicting the detailed diffusion-dominated dissolution process of polydisperse spheroidal (prolate, oblate, and spherical) particle systems with a broad range of distributions of particle size and aspect ratio has been developed. A rigorous, mathematics-based QSM of the dissolution of single spheroidal particles has been incorporated into the well-established framework of polydisperse dissolution models based on the assumption of uniform bulk concentration. Validation against experimental results shows that this model can accurately predict the increase in bulk concentration of polydisperse systems with various particle sizes and shape parameters. A series of representative instances involving the dissolution of polydisperse felodipine particles at various concentration ratios is used to demonstrate the model’s effectiveness, rendering it a valuable tool for understanding and managing complex systems with diverse particle characteristics.more » « less
-
Vat photopolymerization (VP) additive manufacturing involves selectively curing low‐viscosity photopolymers via exposure to ultraviolet light in a layer‐wise fashion. Dispersing filler materials in the photopolymer enables tailored end‐use properties, but also increases the viscosity and the timescale associated with interparticle network structural recovery postshear. These rheological properties influence self‐leveling and recoating of the liquid photopolymer mixture during VP. Herein, viscosity of photopolymer and rigid spherical glass microparticles (filler) is experimentally determined as a function of filler fraction, filler size distribution (mono‐ and polydisperse), shear rate, and temperature, which are important VP process parameters. Employing existing viscosity models for mono‐ and polydisperse polymer mixtures demonstrates that particle–particle interactions and the formation of nonspherical clusters of particles strongly affect the viscosity of both monodisperse and polydisperse mixtures with particle volume fractions > 0.05 due to agglomeration/deagglomeration of clusters at elevated shear rates. Consequently, unmodified viscosity models, which assume uniformly dispersed, rigid, spherical particles, are applicable only for mixtures with particle volume fractions < 0.05. It is shown that modifying model parameters such as the fluidity limit and intrinsic viscosity, which explicitly account for nonspherical clusters of particles, improves agreement between viscosity models and experiments, in particular when using a fractal approach.more » « less
-
Abstract Rheological modifiers are added to formulations to tune rheology, enable function and drive phase changes requiring an understanding of material structure and properties. We characterize two colloidal rod systems during phase transitions using multiple particle tracking microrheology, which measures the Brownian motion of probes embedded in a sample. These systems include a colloid (monodisperse polyamide or polydisperse hydrogenated castor oil), surfactant (linear alkylbenzene sulfonate [LAS]), and nonabsorbing polymer (polyethylene oxide [PEO]) which drives gelation by depletion interactions. Phase transitions are characterized at all concentrations using time‐cure superposition. We determine that rheological evolution depends onLAS:colloid. The critical PEO concentration required to form a gel,cc/c*, is independent ofLAS:colloid, critical relaxation exponent,n, is dependent onLAS:colloid, and both are independent of colloid polydispersity.nindicates the material structure at the phase transition. AtLAS:colloid > 16, the scaffold is a tightly associated network and atLAS:colloid = 16 a loosely associated network.more » « less
-
Voronoi diagrams are widely used to model disperse systems such as foams, powders, polycrystals and atoms in the classical limit. Voronoi tessellations partition the continuous phase into compartments, or cells, that encompass all space closer to the assigning dispersed object than any other in the system. To account for heterogeneity in object size, weights are applied to avoid unphysical partitioning across non-contacting objects. Power and additive weighting are the most common weighting schemes, wherein power is more computationally tractable but additive weighting correlates more directly with size. In general, the two schemes produce distinct spatial decompositions for any non-monodisperse system. To calibrate the divergent volumetric metrics from the two schemes, and to gain physical insight into their divergence, we compared power and additively weighted Voronoi diagrams of polydisperse ensembles representing physically relevant ranges of polydispersity, density, and overlap. When tested against experimental distributions of gas foams, the results related their divergent power and additively weighted decompositions to the polydispersity of their particle size distributions. Geometric analysis of the Voronoi cells implicated the subpopulation of small objects as the primary contributors to the divergence through their preferential assignment of larger, aspherical power cells relative to their additively weighted counterparts.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1103/PhysRevE.108.054605
