An official website of the United States government
Flexible electronic devices with skin-like properties are hailed as revolutionary for the development of next-generation electronic devices, such as electric-skin and humanoid robotics. Graphene is intrinsically flexible due to its structural thinness in nature and are considered next-generation materials for wearable electronics. These devices usually experience a large mechanical deformation in use so as to achieve intimate conformal contact with human skin and to coordinate complex human motions, while heat dissipation has been a major limitation when the device is under a large mechanical strain. Unlike the small deformation (<1%) induced by intrinsic material factors such as lattice mismatch between material components in devices, a large mechanical deformation (>1%) by an external loading condition could lead to apparent changes to global geometric shapes and significantly impact thermal transport. In this study, we investigated the thermal conductivities of graphene under several large mechanical strains: 2.9%, 4.3%, and 6.1%. We used a refined opto-thermal Raman technique to characterize the thermal transport properties and discovered the thermal conductivities to be 2092 ± 502, 972 ± 87, 348 ± 52, and 97 ± 13 W/(m K) for the relaxed state, 2.9%, 4.3%, and 6.1% tensile strain, respectively. Our results showed a significant decreasing trend in thermal conductivities with an increasing mechanical strain. The findings in this study reveal new thermal transport mechanisms in 2D materials and shed light on building novel flexible nanoelectronic devices with enhanced thermal management.
more »
« less
Novel wet transfer technology of manufacturing flexible suspended two-dimensional material devices
With the rise of two-dimensional (2D) materials, their excellent optical, electronic, and thermal properties different from bulk materials make them increasingly widely studied and commercialized. 2D materials’ exceptional physical properties and unique structures make them an ideal candidate for next-generation flexible and wearable devices. In this work, we created a manufacturing method to successfully transfer monolayer, bilayer, and trilayer graphene onto the flexible substrate, with trenches of micron size to suspend graphene. Thermal transport measurements have been characterized to prove the suspended region. The achievement of manufacturing 2D materials in suspended condition will allow us to study their intrinsic physical properties at a mechanical strain, as well as contribute to novel flexible and wearable electronic devices and sensors.
more »
« less
- PAR ID:
- 10511223
- Publisher / Repository:
- AVS
- Date Published:
- Journal Name:
- Journal of Vacuum Science & Technology B
- Volume:
- 41
- Issue:
- 6
- ISSN:
- 2166-2746
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)With the development of the Internet of Things (IoT), the demand for thin and wearable electronic devices is growing quickly. The essential part of the IoT is communication between devices, which requires radio-frequency (RF) antennas. Metals are widely used for antennas; however, their bulkiness limits the fabrication of thin, lightweight, and flexible antennas. Recently, nanomaterials such as graphene, carbon nanotubes, and conductive polymers came into play. However, poor conductivity limits their use. We show RF devices for wireless communication based on metallic two-dimensional (2D) titanium carbide (MXene) prepared by a single-step spray coating. We fabricated a ~100-nm-thick translucent MXene antenna with a reflection coefficient of less than −10 dB. By increasing the antenna thickness to 8 μm, we achieved a reflection coefficient of −65 dB. We also fabricated a 1-μm-thick MXene RF identification device tag reaching a reading distance of 8 m at 860 MHz. Our finding shows that 2D titanium carbide MXene operates below the skin depth of copper or other metals as well as offers an opportunity to produce transparent antennas. Being the most conductive, as well as water-dispersible, among solution-processed 2D materials, MXenes open new avenues for manufacturing various classes of RF and other portable, flexible, and wearable electronic devices.more » « less
-
Electrochemical biosensors have the potential to provide rapid and inexpensive diagnostics while moving clinical testing from centralized labs to point-of-care (POC) applications. Conductive materials functionalized with bioreceptors that remain stable and functional for measurements in real-world conditions are essential for the fabrication of electrochemical biosensors, and carbon-based nanomaterials provide the electrical, chemical, structural, and mechanical features that make them suitable for POC devices. This review details the most recent developments in the use of carbon-based nanostructures, with a focus on one-dimensional carbon nanotubes, two-dimensional graphene, and graphene oxide, their interface with biological receptors, deposition on portable, flexible, and wearable substrates, and integration on low-cost platforms for detection of clinical biomarkers. The large-scale manufacturing and implementation of microneedles as implantable and electronic tattoos as wearable devices for on-skin diagnostics, and lab-on-mouth platforms as well as the interface with mobile technologies and their potential implementation for remote POC monitoring and decentralized healthcare through cloud processing and the internet of things (IoT) are discussed with examples of applications. The review concludes with an overview of the regulatory perspectives and future trends, challenges, and opportunities for commercialization and translation of these technologies from the research lab to practice, as useful diagnostic tools for remote monitoring of patient health conditions.more » « less
-
Abstract 2D materials have exceptional physical and chemical characteristics, which makes them attractive for wearable technology. These characteristics include high carrier mobility, outstanding mechanical performance, abundant chemistry, and excellent electrostatic tunability. However, due to the high electron doping effect of interfacial charge impurities and intrinsic defects, most reported 2D materials are n‐type. Complementary electronic devices and high‐performance wearable sensors necessitate the development ofp‐type 2D semiconductors, which have superior electrocatalytic performance in oxidative processes compared to their n‐type counterparts. This review paper thoroughly accounts for recent advancements in 2Dp‐type semiconductor‐based wearable sensors, covering basic understandings, synthesis and fabrication, functional devices, and sensor performance insights. Finally, challenges and future opportunities for 2Dp‐type semiconductor‐based wearable sensors are discussed.more » « less
-
Expected to become mainstream in the electronic industry, flexible electronics still face major challenging issues. For polymeric based flexible electronic substrates in particular, these challenges include a lack of electromagnetic shielding capability and poor heat dissipation. Here, we report a highly flexible and thermally-conductive macroscopic polydimethylsiloxane (PDMS) polymer film embedded with copper-coated reduced graphene oxide (rGO) fiber meshes. rGO fibers are assembled into 3D fiber meshes and electroplated with micrometer-thick copper coatings, displaying excellent electrical and thermal conductivities. Oriented in the horizontal and perpendicular directions within the PDMS polymeric matrix, the fiber mesh severs as a highly electrically and thermally-conductive backbone through the in-plane direction. Meanwhile, the fiber mesh also effectively shields electromagnetic interference in the X-band without causing thermal damage. The macroscopic film maintains electrically-insulated in the through-plane direction. Utilizing both the favorable thermal and electrical properties of the graphene fiber-based mesh and the flexibility of the PDMS matrix, our film may exhibit potentials for flexible electronics applications such as wearable electronics thermal management and flexible microwave identification devices.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1116/6.0003087
