An official website of the United States government
Abstract Antimony selenide (Sb2Se3) has excellent directional optical and electronic behaviors due to its quasi‐1D nanoribbons structure. The photovoltaic performance of Sb2Se3solar cells largely depends on the orientation of the nanoribbons. It is desired to grow these Sb2Se3ribbons normal to the substrate to enhance photoexcited carrier transport. Therefore, it is necessary to develop a strategy for the vertical growth of Sb2Se3nanoribbons to achieve high‐efficiency solar cells. Since antimony sulfide (Sb2S3) and Sb2Se3are from the same space group (Pbnm) and have the same crystal structure, herein an ultrathin layer (≈20 nm) of Sb2S3has been used to assist the vertical growth of Sb2Se3nanoribbons to improve the overall efficiency of Sb2Se3solar cell. The Sb2S3thin layer deposited by the hydrothermal process helps the Sb2Se3ribbons grow normal to the substrate and increases the efficiency from 5.65% to 7.44% through the improvement of all solar cell parameters. This work is expected to open a new direction to tailor the Sb2Se3grain growth and further develop the Sb2Se3solar cell in the future.
more »
« less
Solution‐Processed Sb 2 (S,Se) 3 Seed‐Assisted Sb 2 Se 3 Thin Film Growth for High Efficiency Solar Cell
Antimony selenide (Sb2Se3) emerges as a promising sunlight absorber in thin film photovoltaic applications due to its excellent light absorption properties and carrier transport behavior, attributed to the quasi‐one‐dimensional Sb4Se6‐nanoribbon crystal structure. Overcoming the challenge of aligning Sb2Se3‐nanoribbons normal to substrates for efficient photogenerated carrier extraction, a solution‐processed nanocrystalline Sb2(S,Se)3‐seeds are employed on the CdS buffer layer. These seeds facilitate superstrated Sb2Se3thin film solar cell growth through a close‐space sublimation approach. The Sb2(S,Se)3‐seeds guided the Sb2Se3absorber growth along a [002]‐preferred crystal orientation, ensuring a smoother interface with the CdS window layer. Remarkably, Sb2(S,Se)3‐seeds improve carrier transport, reduce series resistance, and increase charge recombination resistance, resulting in an enhanced power conversion efficiency of 7.52%. This cost‐effective solution‐processed seeds planting approach holds promise for advancing chalcogenide‐based thin film solar cells in large‐scale manufacturing.
more »
« less
- PAR ID:
- 10513165
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Solar RRL
- Volume:
- 8
- Issue:
- 11
- ISSN:
- 2367-198X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Photoelectrochemical (PEC) hydrogen generation is a promising solar energy harvesting technique to address the concerns about the ongoing energy crisis. Antimony selenide (Sb2Se3) with van der Waals‐bonded quasi‐1D (Q1D) nanoribbons, for instance, (Sb4Se6)n, has attracted considerable interest as a light absorber with Earth‐abundant elements, suitable bandgap, and a desired sunlight absorption coefficient. By tuning its anisotropic growth behavior, it is possible to achieve Sb2Se3films with nanostructured morphologies that can improve the light absorption and photogenerated charge carrier separation, eventually boosting the PEC water‐splitting performance. Herein, high‐quality Sb2Se3films with nanorod (NR) array surface morphologies are synthesized by a low‐cost, high‐yield, and scalable close‐spaced sublimation technique. By sputtering a nonprecious and scalable crystalline molybdenum sulfide (MoS2) film as a cocatalyst and a protective layer on Sb2Se3NR arrays, the fabricated core–shell structured MoS2/Sb2Se3NR PEC devices can achieve a photocurrent density as high as −10 mA cm−2at 0 VRHEin a buffered near‐neutral solution (pH 6.5) under a standard simulated air mass 1.5 solar illumination. The scalable manufacturing of nanostructured MoS2/Sb2Se3NR array thin‐film photocathode electrodes for efficient PEC water splitting to generate solar fuel is demonstrated.more » « less
-
The antimony selenide (Sb2Se3) thin film solar cells technology become promising due to its excellent anisotropic charge transport and brilliant light absorption capability. Especially, the device performance heavily relies on the vertically oriented Sb2Se3 grain to promote photoexcited carrier transport. However, crystalline orientation control has been a major issue in Sb2Se3 thin film solar cells. In this work, a new strategy has been developed to tailor the crystal growth of Sb2Se3 ribbons perpendicular to the substrate by using the structural heterostructured CdS buffer layer. The heterostructured CdS buffer layer was formed by a dual layer of CdS nanorods and nanoparticles. The hexagonal CdS nanorods passivated by a thin cubic CdS nanoparticle layer can promote [211] and [221] directional growth of Sb2Se3 ribbons using a close space sublimation approach. The improved buffer/absorber interface, reduced interface defects, and recombination loss contribute to the improved device efficiency of 7.16%. This new structural heterostructured CdS buffer layer can regulate Sb2Se3 nanoribbons crystal growth and pave the way to further improve the low-dimensional chalcogenide thin film solar cell efficiency.more » « less
-
Abstract Optoelectronics are crucial for developing energy‐efficient chip technology, with phase‐change materials (PCMs) emerging as promising candidates for reconfigurable components in photonic integrated circuits, such as nonvolatile phase shifters. Antimony sulfide (Sb2S3) stands out due to its low optical loss and considerable phase‐shifting properties, along with the non‐volatility of both phases. This study demonstrates that the crystallization kinetics of Sb2S3can be switched from growth‐driven to nucleation‐driven by altering the sample dimension from bulk to film. This tuning of the crystallization process is critical for optical switching applications requiring control over partial crystallization. Calorimetric measurements with heating rates spanning over six orders of magnitude, reveal that, unlike conventional PCMs that crystallize below the glass transition, Sb2S3exhibits a measurable glass transition prior to crystallization from the undercooled liquid (UCL) phase. The investigation of isothermal crystallization kinetics provides insights into nucleation rates and crystal growth velocities while confirming the shift to nucleation‐driven behavior at reduced film thicknesses—an essential aspect for effective device engineering. A fundamental difference in chemical bonding mechanisms was identified between Sb2S3, which exhibits covalent bonding in both material phases, and other PCMs, such as GeTe and Ge2Sb2Te5, which demonstrate pronounced bonding alterations upon crystallization.more » « less
-
Herein, antimony sulfoselenide (Sb2(S, Se)3) thin‐film solar cells are fabricated by a hydrothermal method followed by a post‐deposition annealing process at different temperatures and the impact of the annealing temperature on the morphological, structural, optoelectronic, and defect properties of the hydrothermally grown Sb2(S, Se)3films is investigated. It is found that a proper annealing temperature leads to high‐quality Sb2(S, Se)3films with large crystal grains, high crystallinity, preferred crystal orientation, smooth and uniform morphology, and reduced defect density. These results show that suppressing deep‐level defects is crucial to enhance solar cell performance. After optimizing the annealing process, Sb2(S, Se)3solar cells with an improved power conversion efficiency 2.04 to 8.48% are obtained.more » « less
