An official website of the United States government
Abstract Piezoelectric transducers are widely employed in vibration control and energy harvesting. The effective electro-mechanical coupling of a piezoelectric system is related to the inherent capacitance of the piezoelectric transducer. It is known that passive vibration suppression through piezoelectric LC shunt can be enhanced with the integration of negative capacitance which however requires a power supply. This research focuses on the parametric investigation of a self-sustainable negative capacitance where the piezoelectric transducer is concurrently used in both vibration suppression and energy harvesting through LC shunt. The basic idea is to utilize the energy harvesting functionality of the piezoelectric transducer to aid the usage of negative capacitance in terms of power supply. Specifically, the power consumption and circuitry performance with respect to negative capacitance circuit design is analyzed thoroughly. Indeed, the net power generation is the difference between available power in the shunt circuit and the power consumption of the negative capacitance circuit. There exists complex tradeoffs between net power generation and the vibration suppression performance when we use different resistance values in the negative capacitance circuit. It is demonstrated through correlated analytical simulation and experimental study that the proper selection of the resistance values in the negative capacitance circuit can result in vibration suppression enhancement as well as improved net power generation, leading to a self-sustainable negative capacitance scheme.
more »
« less
On a Nonlinear Locally Resonant Metamaterial With Resistance-Inductance Shunt
Abstract Numerous recent works have established the potential of various types of metamaterials for simultaneous vibration control and energy harvesting. In this paper, we investigate a weakly nonlinear metamaterial with electromechanical (EM) local resonators coupled to a resistance-inductance shunt circuit, a system with no previous examination in the literature. An analytical solution is developed for the system, using the perturbation method of multiple scales, and validated through direct numerical integration. The resulting linear and nonlinear band structures are used for parametric analysis of the system, focusing on the effect of resonator and shunt circuit parameters on band gap formation and vibration attenuation. This band structure analysis informs further study of the system through wavepacket excitation as well as spectro-spatial analysis. The voltage response of the system is studied through spatial profiles and spectrograms to observe the effects of shunt inductance, nonlinearity, and their interactions. Results describe the impact of adding a shunted inductor, including significant changes to the band structure; multiple methods of tuning band gaps and pass bands of the system; and changes to wave propagation and voltage response. The results demonstrate the flexibility of the proposed metamaterial and its potential for both vibration control and energy harvesting, specifically compared to a previously studied system with resistance-only shunt.
more »
« less
- Award ID(s):
- 2038187
- PAR ID:
- 10515182
- Publisher / Repository:
- ASME J. Comput. Nonlinear Dynam.
- Date Published:
- Journal Name:
- Journal of Computational and Nonlinear Dynamics
- Volume:
- 19
- Issue:
- 5
- ISSN:
- 1555-1415
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract A new class of electromechanically coupled metamaterial is presented which relies on magnetic field interactions between the host structure and a local resonator circuit to realize novel vibration control capabilities. The metamaterial chain exhibits a highly tunable vibration band gap which can be easily placed at a desired frequency using the resonant circuit parameters, providing a robust mechanism to independently alter the band gap width, depth, and frequency of maximum attenuation. In its dissipative form, the electromechanical metamaterial is shown to exhibit electrical metadamping as a function of the local resonance circuit resistance. The impact of the damping ratio as a function of the electrical resistance is characterized in frequency and time domains, and related to the infinite system dynamics. A robust experimental realization of the system is constructed which achieves electromechanical coupling through a moving coil and magnet system. The apparatus is used to show that the band gap location and depth can be readily tuned with the circuit elements. The presented metamaterial has potential for meaningful vibroacoustic practical applications in addition to revealing fundamentally new properties of damped electrically-resonant structures.more » « less
-
Abstract Several investigators have taken advantage of electromagnetic shunt-tuned mass dampers to achieve concurrent vibration mitigation and energy harvesting. For nonlinear structures such as the Duffing oscillator, it has been shown that the novel nonlinear electromagnetic resonant shunt-tuned mass damper inerter (NERS-TMDI) can mitigate vibration and extract energy for a wider range of frequencies and forcing amplitudes when compared to competing technologies. However, nonlinear systems such as the NERS-TMDI are known to exhibit complex stability behavior, which can strongly influence their performance in simultaneous vibration control and energy harvesting. To address this problem, this paper conducts a global stability analysis of the novel NERS-TMDI using three approaches: the multi-parametric recursive continuationWe emphasize that these assume method, Floquet theory, and Lyapunov exponents. A comprehensive parametric analysis is also performed to evaluate the impact of key design parameters on the global stability of the system. The outcome indicates the existence of complex nonlinear behavior, such as detached resonance curves, and the transition of periodic stable solutions to chaotic solutions. Additionally, a parametric study demonstrates that the nonlinear stiffness has a minimal impact on the linear stability of the system but can significantly impact the nonlinear stability performance, while the transducer coefficient has an impact on the linear and nonlinear stability NERS-TMDI. Finally, the global sensitivity analysis is performed relative to system parameters to quantify the impact of uncertainty in system parameters on the dynamics. Overall, our findings show that simultaneous vibration control and energy harvesting come with a considerable instability trade-off that limits the range of operation of the NERS-TMDI.more » « less
-
Electromechanical metamaterials have been the focus of many recent studies for use in simultaneous energy harvesting and vibration control. Metamaterials with quasiperiodic patterns possess many useful topological properties that make them a good candidate for study. However, it is currently unknown what effect electromechanical coupling may have on the topological bandgaps and localized edge modes of a quasiperiodic metamaterial. In this paper, we study a quasiperiodic metamaterial with electromechanical resonators to investigate the effect on its bandgaps and localized vibration modes. We derive here the analytical dispersion surfaces of the proposed metamaterial. A semi-infinite system is also simulated numerically to validate the analytical results and show the band structure for different quasiperiodic patterns, load resistors, and electromechanical coupling coefficients. The topological nature of the bandgaps is detailed through an estimation of the integrated density of states. Furthermore, the presence of topological edge modes is determined through numerical simulation of the energy harvested from the system. The results indicate that quasiperiodic metamaterials with electromechanical resonators can be used for effective energy harvesting without changes in the bandgap topology for weak electromechanical coupling.more » « less
-
Abstract An advanced nonlinear and nonuniform distributed circuit (RLCG) model of lightning M‐component has been developed. The model accounts for the variation of the series resistanceRof M‐component channel due to its heating by the transient current and its subsequent cooling, longitudinal voltage drop along the channel due to the background continuing current, ohmic losses in the channel corona sheath (represented by shunt conductanceG), and variation of series inductanceLand shunt capacitanceCof the channel with height above ground. The model was tested against the channel‐base current and corresponding close electric fields measured for seven M‐components in negative lightning triggered using the rocket‐and‐wire technique. Detailed sensitivity analysis was performed for one M‐component. The influences of height‐varying series inductance and shunt capacitance and the length of in‐cloud channel (representing the excitation source) on the computed current and field waveforms were found to be relatively insignificant, while the influences of ohmic losses in the channel corona sheath and voltage drop along the grounded channel were significant. The effects of background continuing current level and grounding resistance were significant for M‐field, but not for M‐current. Model‐predicted overall power and current profiles below the cloud base are consistent with the observed M‐component luminosity profiles and are drastically different from the observed downward leader/upward return stroke profiles. The characteristic feature of M‐components, the time shift between the current onset and close electric field peak (essentially absent for leader/return stroke sequences), was well reproduced by our model.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1115/1.4065010
