skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Ice Lithography at MU - Current and Future Directions
Ice Lithography (IL) is a new technique for electron beam lithography that employs conformal ices (i.e., solid phase condensed gasses) as sacrificial resist layers for lithographic processes on a variety of sample types. The completely dry in-situ processing inherent in IL allows for high precision patterning of delicate and organic surfaces such as atomic force microscope (AFM) tips and proteins. In this talk I will present an overview of the capabilities of the MU IL instrument and describe our recent work, which is centered on pushing ice species beyond water. Amorphous H2O ice is a material that has been well characterized in the astrophysics community but has received little attention from the nanotechnology field. It is a positive resist that requires large critical doses (about 2C/cm^2 for 200nm thick ice). The alcohols (ethanol, methanol and isopropanol) are attractive candidates to complement water ice. They are negative phase resists which exhibit lower critical dose (0.2C/cm^2 for 200nm thick ice) requirements than water ice. We are exploring the use of alcohol resists in conjunction with Reactive Ion Etching (RIE) for accurate modification of small, delicate, structures such as AFM tips. We are also interested in characterizing the residual material from alcohol ices after exposure to the electron beam which can be achieved through several methods including Electron Energy Loss Spectroscopy (EELS) and simulations such as the high energy chemistry program GEANT-4.  more » « less
Award ID(s):
2314347
PAR ID:
10515845
Author(s) / Creator(s):
;
Publisher / Repository:
American Physical Society
Date Published:
Journal Name:
Bulletin of the American Physical Society
ISSN:
0003-0503
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; (, Proc. SPIE 12498, Advances in Patterning Materials and Processes XL)
    Guerrero, Douglas; Amblard, Gilles R. (Ed.)
    As lithographic techniques advance in their capabilities of shrinking microelectronics devices, the need for improved resist materials, especially for extreme ultraviolet (EUV), has become increasingly pressing. In this work, we study the molecular layer deposition (MLD) of an Al-based hybrid thin film resist, known as “alucone,” extending our previous research that tested the Hf-based hybrid thin film “hafnicone” as an EUV resist. Alucone is grown at 100 ºC using the metal precursor trimethylaluminum and the organic precursor ethylene glycol. Like hafnicone, alucone behaves as a negative tone resist that can resolve 50-nm line widths, though preliminary data suggest that alucone’s line patterns are more sharply defined than those of hafnicone. Whereas hafnicone’s sensitivity is 400 μC/cm2 using 3 M HCl as the developer, alucone’s sensitivity is not yet as good (4800 μC/cm2 using 0.125 M HCl). Our study of alucone offers new insight into structural features of an MLD film that can lead to desired EUV-responsive behavior. This insight may accelerate the development of vapor-deposited inorganic resists for use in electron-beam and EUV lithography. 
    more » « less
  2. (, University of Kentucky Libraries)
    Radiolysis is a complex phenomenon in which molecules subjected to ionizing radiation form new chemical species. Electron-beam irradiation has proven to be a versatile approach for significantly altering materials’ properties and forms the basis for electron-beam lithography using both organic and inorganic resists. Electron-beam exposure is normally carried out under high vacuum conditions to reduce contamination and allow for unhindered interaction between the electrons and the resist material. Exposure under an ambient gas at sub-atmospheric pressures has been found to provide a distinct mechanism which can be exploited to circumvent some of the challenges associated with material processing and significantly alter or enhance material’s properties. This dissertation discusses the modifications in standard electron beam resist characteristics during gas assisted electron beam pattering. We studied the effect of water vapor pressure on positive and negative tone electron-beam patterning of poly methyl methacrylate (PMMA). For both positive and negative-tone patterning, it was found that increasing the water vapor pressure considerably improved the contrast of PMMA. As expected from electron scattering in a gas, the clearing dosage for positive tone patterning gradually increased with vapor pressure. Also, electron scattering in water vapor yielded a substantially larger clear region around the negative-tone patterns. This effect could be useful for increasing the range of the developed region around cross-linked PMMA far beyond the backscattered electron range. As a result, VP-EBL for PMMA offers a new means of tuning clearing/onset dose and contrast while enabling more control over the size of the cleared region around negative-tone patterns. We provide a novel way to simultaneously tune the emission wavelength and enhance the fluorescence intensity of fluorophores formed by irradiating polystyrene with a focused electron beam under various gaseous environments. We studied the effect of electron dose and gas pressure on the emission spectra and photon yield of irradiated polystyrene film on a variety of substrates. Up to 10x enhancement in fluorescence yield was achieved using water vapor and the peak emission wavelength tuned over a wide wavelength range. Thus, localized electron-beam synthesis of fluorophores in polystyrene can be controlled by both dose and by ambient water-vapor pressure. This technique could enable innovative approaches to photonics where fluorophores with tunable emission properties can be locally introduced by electron-beam patterning. We also studied the effect of ambient gases on contrast and resolution of PMMA on conducting and insulating substrates. E-beam exposures were conducted under vacuum conditions and 1 mbar of water vapor, helium, nitrogen and argon to study their effect on contrast and resolution of PMMA on silicon, fused silica and soda lime glass substrates. On silicon, exposure under water vapor yielded contrast values significantly higher than vacuum exposure, consistent with our previous work. However, exposure under helium yielded slightly improved contrast compared to vacuum exposure. On insulating substrates exposure under helium environment yielded contrast values significantly higher compared to vacuum exposure. The clearing dose was found to increase with the gases’ molecular weight and proton number, consistent with the increase in scattering cross-section. The improved contrast and sensitivity (dose to clear) of PMMA under helium motivated us to study the resolution under various gases. Resolution testing indicated that despite the lower clearing dose, helium still exhibited the best resolution with 25-nm half-pitch dense lines and spaces clearly resolved on soda lime glass. Thus, VP-EBL of PMMA under helium yields higher sensitivity and contrast on insulating substrates without sacrificing resolution. 
    more » « less
  3. ; ; (, MRS Advances)
    ABSTRACT Climate change and an increase in endangered species, are examples of technological advances negatively impacting the environment. As technology demands increase, an earnest effort to reduce the environmental impact of processing and manufacturing related activities is critical. From a business perspective, minimizing or removing toxic process chemicals is a high impact area that can increase work environment safety and decrease waste management costs. This work presents processing considerations when transitioning to greener alternative polymer resist solvents, for applications in nanomanufacturing with sustainability considerations. Within government contracting, process modifications that change product form, fit, or function require qualification and at minimum justification. This work presents the conversion from a chlorobenzene to anisole based solvent using a 495 kMW polymetheyl methacrylate polymer resin, without impacting form fit or function of the intended device. Resist conversion is of interest as the difference in the substituents of the two solvents, impact the effective toxicity of the polymer resists. Specifically, the oral median lethal dose (LD 50 ) in rats for chlorobenzene is 1110 mg/kg, while anisole is 3700 mg/kg. Therefore, developing a process utilizing anisole and replacing chlorobenzene addresses safety concerns and contributes to green initiatives worldwide. Within this work electron beam lithography fabricated transistor components consisting of a double layered source, and gate were converted from a chlorobenzene to anisole based process; while maintaining process of record specifications. The purpose of this work is to provide a starting platform for individuals seeking to convert from a chlorobenzene solvent to an anisole based resist for sub-micron lithography steps. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract A variety of unconventional materials, including biological nanostructures, organic and hybrid semiconductors, as well as monolayer, and other low‐dimensional systems, are actively explored. They are usually incompatible with standard lithographic techniques that use harsh organic solvents and other detrimental processing. Here, a new class of green and gentle lithographic resists, compatible with delicate materials and capable of both top‐down and bottom‐up fabrication routines is developed. To demonstrate the excellence of this approach, devices with sub‐micron features are fabricated on organic semiconductor crystals and individual animal's brain microtubules. Such structures are created for the first time, thanks to the genuinely water‐based lithography, which opens an avenue for the thorough research of unconventional delicate materials at the nanoscale. 
    more » « less
  5. ; ; ; ; ; ; (, Proceedings of the 17th IEEE International Conference on Nanotechnolog)
    Detrimental nanoscale gas bubble defects seriously hinder the practical applications of nanoimprint lithography in manufacturing of nanoelectronic devices. Here, we present a nanofluidics study on the formation and evolution mechanisms of nanoscale bubble defects in dispensing-based UV-curable nanoimprint lithography processes. Our work indicates that the formation of nanoscale bubble defects is mainly attributed to the pinning of resist spreading edges at the nanostructures or contaminants on the mold/substrate surfaces. Such pinning-induced nanoscale gas bubbles undergo an evolution process governed by the combinational effect of surface pinning and gas dissolution into resist. Such an evolution process results in a prominent drop of the gas pressure inside bubbles and therefore prevents nanoscale gas bubble defects from the complete dissolution into resists. This work identifies the critical mechanisms responsible for the formation of detrimental nanoscale bubble defects and provides important insights for the ultimate elimination of such defects 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email