An official website of the United States government
The instrumented buoy on Trout Lake is equipped with a thermistor chain that measures water temperature from thermistors placed throughout the water column. From 2004 to mid-summer 2006, thermistors were placed every 0.5-1m from the surface through 14m, and every 2 to 4m from 14m to the bottom of the water column at 31m. The surface temperature sensors are attached to floats so that they are as close to the surface as feasible. In July 2006, a new thermistor chain was deployed with sensors placed every meter from the surface through a depth of 19 meters. This configuration lasted through 2008 and was used again 2012-2014. In the period 2009-2011, thermistors were place every meter down to 20m and then every two meters to a final depth of 32m. From 2015 to present, thermistors are spaced 0.25 meters from the surface to 1m, 0.5 meters down to 4 meters depth, and 1m spacing to 14 meters. Four more thermistors are at depths of 16, 20, 25 and 30 meters. Sampling frequency was 10 minutes in 2004-2005 and again 2007-2010. It was 2 minutes in 2006. Since 2011, sampling frequency has been every minute. Hourly and daily averages are also provided. Number of sites: 1.
more »
« less
Bight Fracture Zone Experiment Moored Instrument Data
Two 2-year moorings were placed in the Bight Fracture Zone (BFZ), one in the north channel and one in the south channel, between July 2015 to July 2017. Each mooring was instrumented at four depths with a pair of instruments comprised of an SBE MicroCAT and a Nobska MAVS-4 Acoustic Current Meter. The four pairs of instruments were placed at 1500, 1750, 2000 meters depth and 22 meters above the bottom of the channel (2440 meters depth in the north channel and 2115 meters depth in the south channel). The initial processing for both the MicroCAT and MAVS-4 consisted of removing data collected while out of water, replacing data outliers with NaNs, and correcting drifts in the data. In addition, the MAVS-4 data were transformed from instrument coordinates to earth coordinates and magnetic declination was correction was applied.
more »
« less
- Award ID(s):
- 1756363
- PAR ID:
- 10516368
- Publisher / Repository:
- Woods Hole Oceanographic Institution
- Date Published:
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The Argentine Basin array has two identical Flanking Moorings that make up the equidistant sides of a triangle of Moorings (62 km) from the co-located Profiler and Surface Moorings. They are located in 5,200 meters of water along the Brazil Current in the South Atlantic. The triangular configuration moorings provide unique spatial array through which instruments fixed to moorings continuously collect data through time and gliders sample the area between the moorings. The Argentine Basin site is one of four high latitude open ocean locations in the OOI that provide observations to gain better insight into global ocean circulation and climate.\nLike other Flanking Subsurface Moorings, the Argentine Basing Flanking Subsurface Moorings contain instruments fixed at specific depths along the mooring riser throughout the water column to a depth of 1,500 meters. The flotation buoy for these subsurface moorings is located 30 meters below the sea surface. As they have no surface expression, these moorings communicate and send data to shore via an acoustic link to nearby gliders.more » « less
-
The Argentine Basin array has two identical Flanking Moorings that make up the equidistant sides of a triangle of Moorings (62 km) from the co-located Profiler and Surface Moorings. They are located in 5,200 meters of water along the Brazil Current in the South Atlantic. The triangular configuration moorings provide unique spatial array through which instruments fixed to moorings continuously collect data through time and gliders sample the area between the moorings. The Argentine Basin site is one of four high latitude open ocean locations in the OOI that provide observations to gain better insight into global ocean circulation and climate.\nLike other Flanking Subsurface Moorings, the Argentine Basing Flanking Subsurface Moorings contain instruments fixed at specific depths along the mooring riser throughout the water column to a depth of 1,500 meters. The flotation buoy for these subsurface moorings is located 30 meters below the sea surface. As they have no surface expression, these moorings communicate and send data to shore via an acoustic link to nearby gliders.more » « less
-
The Irminger Sea array has two identical Flanking Moorings that make up the equidistant sides of a triangle of Moorings (20 km) from the co-located Profiler and Surface Moorings. They are located in 2,800 meters of water southeast of Greenland in the North Atlantic. The triangular configuration moorings provide unique spatial array through which instruments fixed to moorings continuously collect data through time and gliders sample the area between the moorings. The Irminger Sea site is one of four high latitude open ocean locations in the OOI that provide observations to gain better insight into global ocean circulation and climate.\nLike other Flanking Subsurface Moorings, the Irminger Sea Flanking Subsurface Moorings contain instruments fixed at specific depths along the mooring riser throughout the water column to a depth of 2,600 meters. The flotation buoy for these subsurface moorings is located 30 meters below the sea surface. As they have no surface expression, these moorings communicate and send data to shore via an acoustic link to nearby gliders.more » « less
-
The Irminger Sea array has two identical Flanking Moorings that make up the equidistant sides of a triangle of Moorings (20 km) from the co-located Profiler and Surface Moorings. They are located in 2,800 meters of water southeast of Greenland in the North Atlantic. The triangular configuration moorings provide unique spatial array through which instruments fixed to moorings continuously collect data through time and gliders sample the area between the moorings. The Irminger Sea site is one of four high latitude open ocean locations in the OOI that provide observations to gain better insight into global ocean circulation and climate.\nLike other Flanking Subsurface Moorings, the Irminger Sea Flanking Subsurface Moorings contain instruments fixed at specific depths along the mooring riser throughout the water column to a depth of 2,600 meters. The flotation buoy for these subsurface moorings is located 30 meters below the sea surface. As they have no surface expression, these moorings communicate and send data to shore via an acoustic link to nearby gliders.more » « less
