skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Dual modification on hematite to minimize small polaron effects and charge recombination for sustainable solar water splitting
Title: Dual modification on hematite to minimize small polaron effects and charge recombination for sustainable solar water splitting
Hematite nanostructures are strong candidates for the development of sustainable water splitting technologies. However, major challenges exist in improving charge density and minimizing charge recombination rates for a competitive photoelectrochemical performance based on hematite without compromising sustainability aspects. Here we develop a synthetic strategy to leverage earth-abundant Al3+ and Zr4+ in a dual-chemical modification to synergistically minimize small polaron effects and interfacial charge recombination. The solution-based method simultaneously induces Al3+ doping of the hematite crystal lattice while Zr4+ forms interfacial excess, creating a single-phased homogeneous nanostructured thin film. The engineered photoanode increased photocurrent from 0.7 mA cm-2 for pristine hematite up to 4.5 mA cm-2 at 1.23 V and beyond 6.0 mA cm-2 when applying an overpotential of 300 mV under simulated sunlight illumination (100 mW cm-2). The results demonstrate the potential of dual-modification design using solution-based processes to enable sustainable energy technologies.  more » « less
Award ID(s):
2015650 2414106
PAR ID:
10516780
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ;
Publisher / Repository:
Royal Chemical Society
Date Published:
Journal Name:
Journal of Materials Chemistry A
Volume:
12
Issue:
11
ISSN:
2050-7488
Page Range / eLocation ID:
6280 to 6293
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; (, International Journal of Hydrogen Energy)
    Scaling up photoelectrochemical (PEC) devices for green hydrogen production is a significant challenge that requires robust and cost-effective production methods. In this study, hematite photoelectrodes has been synthesized using a cost-effective polymeric precursor solution, resulting in homogeneous ultra-thin films (~125 nm) with areas up to 200 cm2. We observed a substantial photocurrent drop as photoelectrode area increases, addressed by modifying the precursor solution with Hf4+. This modification improves the morphology and films adherence, leading to simultaneous grain|grain interface segregation and a modified FTO|hematite interface. As a result, film conductivity increases, reducing the photocurrent drop at larger photoelectrode areas. The improved charge separation and surface charge injection efficiencies allows a homogeneous photocurrent of 1.6 mA cm⁻2 at 1.45V across a 15.75 m2 electrode area, using less than 70 μg of photoactive material. Cost analysis study indicates that this low-energy fabrication method is a significant step forward in green hydrogen production, contributing to sustainable and efficient green hydrogen technologies. 
    more » « less
  2. ; ; ; (, Materials Letters)
    The work demonstrates a three-fold increase in photoelectrochemical efficiency of hematite nanorods as a result of the combination of Hafnium surface doping and the incorporation of a ZrO2 underlayer on FTO. While the ZrO2 layer reduced the electron loss from the back-injection into the FTO contact support, Hafnium surface doping did not significantly alter the hematite lattice structure. But rather, Hafnium induced nanorod diameter reduction from 32 ± 2 and 26 ± 2 nm, with a consequent increase in the active surface area. The linear sweep voltammetry measurements with 100 mW cm−2 illumination in a 500 nm photoanode thickness showed a photocurrent density of 2.07 mA cm−2 at 1.23 V in a reversible hydrogen electrode (RHE). The value contrasts with the bare hematite rods (0.75 mA cm−2), highlighting the photoanode design's role in improving solar power hydrogen production. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; (, Solar RRL)
    Improving efficiency and stability has become an urgent issue in the application of perovskite solar cells (PSCs). Herein, a kind of long‐chain polymer or polymethylmethacrylate (PMMA) is added into the spiro‐OMeTAD matrix to improve the film formation process and hence the device performance. It is observed that, after modification, the spiro‐OMeTAD‐based hole‐transporting layer becomes uniform, continuous, and condensed. Meanwhile, the power conversion efficiency of the devices is upgraded. Compared with the control device, open‐circuit voltage of the modified one (with moderate doping) increases from 1.06 (±0.03) to 1.10 (±0.02) V, fill factor increases from 72.20 (±3.44)% to 75.59 (±3.35)%, and the power conversion efficiency increases from 18.82 (±1.06)% to 20.51 (±0.82)% (highest at 21.78%) under standard test condition (AM 1.5G, 100 mW cm−2). Transient photocurrent/photovoltage decay curves, time‐resolved photoluminance, and impedance spectroscopy studies show that the modification could accelerate charge transfer and retard interfacial recombination. In addition, the modification improves device stability. Due to the strengthened barrier against penetration of “H2O/O2/Ag,” the efficiency of the unsealed device could retain 91.49% (by average) of the initial one after 100 days storage in the dark [relative humidity = 30(±5)%]. This work shows that long‐chain polymer doping could simultaneously improve efficiency and stability of spiro‐OMeTAD‐based PSCs. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; (, Applied Physics Letters)
    Capsaicin is used to modify SnO 2 quantum dots and then used as an electron-transfer material for perovskite solar cells. After capsaicin modification, the power conversion efficiency of the devices increases from 19.90 (± 0.47)% to 21.87 (± 0.28)% with a champion device of 22.24% (AM 1.5G, 100 mW/cm 2 ). Transient photovoltage and photocurrent decay show that, after the capsaicin doping, the lifetime increases from 21.55 (± 1.54) to 27.63 (± 1.45)  μs, while the charge extraction time reduces from 1.90 (± 0.09) to 1.67 (± 0.06)  μs. Time-resolved photoluminescence and impedance spectrum studies show similar results. The accelerated charge transfer and retarded recombination are due to defect passivation. Space charge limited current study shows that, after modification, the trap density of devices is reduced from 2.24 × 10 15 to 1.28 × 10 15  cm −3 . X-ray photoelectron spectroscopy and theoretical calculation indicate that the reduced trap density is due to the chemical interaction between carbonyl group (from capsaicin) and Sn atom, and that between carbonyl group and Pb atom. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Materials Technologies)
    Abstract Extensive research into green technologies is driven by the worldwide push for eco‐friendly materials and energy solutions. The focus is on synergies that prioritize sustainability and environmental benefits. This study explores the potential of abundant, non‐toxic, and sustainable resources such as paper, lignin‐enriched paper, and cork for producing laser‐induced graphene (LIG) supercapacitor electrodes with improved capacitance. A single‐step methodology using a CO2laser system is developed for fabricating these electrodes under ambient conditions, providing an environmentally friendly alternative to conventional carbon sources. The resulting green micro‐supercapacitors (MSCs) achieve impressive areal capacitance (≈7–10 mF cm−2) and power and energy densities (≈4 μW cm‐2and ≈0.77 µWh cm−2at 0.01 mA cm−2). Stability tests conducted over 5000 charge–discharge cycles demonstrate a capacitance retention of ≈80–85%, highlighting the device durability. These LIG‐based devices offer versatility, allowing voltage output adjustment through stacked and sandwich MSCs configurations (parallel or series), suitable for various large‐scale applications. This study demonstrates that it is possible to create high‐quality energy storage devices based on biodegradable materials. This development can lead to progress in renewable energy and off‐grid technology, as well as a reduction in electronic waste. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email