An official website of the United States government
The spray characteristics of fuels when sprayed under superheated and elevated fuel pressure are markedly different than traditional fuel injection sprays. Studying fuel sprays under these conditions will help us understand the complex behaviors that may provide us with information to optimize future applications of certain technologies like supercritical spray combustion. In this work optical diagnostics are used to study the behavior of Jet A-1 under subcritical, transcritical, and supercritical sprays into open air test chambers. The experimental setup includes a high-pressure air driven pump to create the required high fuel pressure and a special heated injector to increase the temperature of the fuel inside the injector before injection to the required temperatures. Optical techniques like Schlieren and backlit shadowgraph are used to capture and study the sprays from a single hole high pressure diesel injector. A combination of 4 different temperatures and 4 different pressures are tested and the resultant images are processed to obtain quantitative measurements such as spray penetrations, spray cone angle, and spray optical density for each case. Moreover, the spray plume structure transition with changing parameters from subcritical, transcritical, and supercritical states for the fuel are also studied. The results show that with the fuel being in a transcritical state before injection there is a measurable variation in the spray cone formation and penetration for any fixed pressure. At this state the spray cone shows a bimodal spray angle distribution with increasing penetration. An increase in vapor turbulence is also observed indicating the occurrence of flash boiling of the fuel. With the fuels pushed to a supercritical state, the spray shows a thinner spray jet near the injector with a reduced overall penetration and reduced optical density near nozzle. The transition between the three different states as shown in this study gives us an interesting relationship between the spray penetration, spray cone angle and the spray optical density. This can be used as an indicator in understanding spray atomization of the fuels under supercritical spray conditions.
more »
« less
Transcritical and Supercritical Fuel Sprays in Subcritical Environments
As fuel injection systems advance towards higher injection pressures and the combustor environment increases in both temperature and pressure in the pursuit of improved emissions and efficiency, advanced combustion strategies are required. Injecting fuel as a supercritical fluid has the potential to improve fuel/air mixing and eliminate steps in the spray vaporization process. Experiments are carried out on a heated fuel injector in an open-air test cell using Mie scattering, Schlieren imaging, and long-distance microscopy to investigate changes in spray characteristics with varying temperature and pressure. Spray angle, spray penetration length, and vapor-liquid ratio data are collected and evaluated. Near-nozzle imaging shows distinct changes in spray morphology during the initial microseconds of spray formation. Sprays injected under conditions further into the supercritical regime exhibit increased spray angle and vapor-to-liquid ratio. Spray penetration is found to decrease with increasing temperature. A jump in vapor-to-liquid ratio is observed in the vicinity of 568 K, indicating a transition in spray behaviour trending towards more rapid fuel/air mixing across the transcritical region. Changes in the micro-scale structure of the spray during the initial microseconds of spray formation exhibit this same narrow transition region. A significantly greater fraction of the spray plume is observed to be in a vapor or vapor-like state at a given time after injection initiation as the injection conditions are advanced into the supercritical state. These findings indicate that injection fuel as a supercritical fluid has the potential to improve the mixing of a fuel/air charge, and thus, improve combustion quality.
more »
« less
- Award ID(s):
- 2104394
- PAR ID:
- 10517308
- Publisher / Repository:
- Proceedings of ICLASS 2024 the 16th Triennial International Conference on Liquid Atomization and Spray Systems
- Date Published:
- Subject(s) / Keyword(s):
- Supercritical spray Supercritical fluids Flash boiling Fuel injection
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Fuels when sprayed under superheated and elevated fuel pressure show different behavior than traditional fuel injection sprays. In this work optical diagnostics were used to study the behavior of Jet A-1 under subcritical, transcritical, and supercritical sprays into open air ambience. Five different temperatures were tested, and the resultant spray images were processed to obtain quantitative measurements such as spray penetrations, and spray cone angle for each case. The spray structure transition with changing parameters from subcritical, transcritical, and supercritical states were also studied. The transition between the three different states are shown in this study and the resulting spray cone angles and penetrations are compared for the fuel. The results show that a transcritical spray has a measurable variation in the spray cone formation and penetration process for a fixed injection pressure. At this state the spray cone shows a bimodal spray angle relationship with increasing penetration. Flash boiling of the fuel is observed near the nozzle of the injector. Increasing the temperature further into the supercritical regime, the spray plume shows a thinning of the jet near the nozzle with a reduced overall penetration compared to lower temperatures.more » « less
-
Recent trends in decarbonizing efforts have brought ammonia to the forefront of research as a fuel for energy and transportation. But several previous studies have strongly suggested that ammonia has difficulties in ignition and heat release when used in a gaseous form due to its physical properties. On the other hand, working with liquid ammonia presents countless problems like difficulty in pressurizing, damage to elastomers and other metals, etc. In this study, pure liquid ammonia is injected into a CVCC (constant volume combustion chamber) using a hollow cone injector to understand the behavior of liquid ammonia when pressurized. Specifically, varying ambient temperature and pressure conditions encompassing the fuel’s subcritical to the supercritical regimes are studied as liquid ammonia tends to rapidly vaporize and flash-boil at pressures and temperatures above 50 bar and 315 K. High-speed shadowgraph and Schlieren imaging techniques are used to characterize the spray and understand the effects of varying conditions. Based on the formation of the central plume due to collapsing spray, many measurements like the plume ratio and penetration are studied to indicate the fuel's transition into the transcritical regime. A measurement of the flash-boiling spray plume ratios along with the spray penetration data give us a correlation of the environmental conditions to the spray transitioning into the supercritical regime. Interestingly, increasing the injection pressure from 75 bar to 150 bar shows 3 distinct regimes forming in the central spray plume penetration and the sprat plume ratio. This study has novel contribution to the development of direct injection of liquid ammonia spray for applications in high-power density engine systems.more » « less
-
In the pursuit of enhanced engine performance and reduced emissions, the design of liquid-fueled propulsion systems is shifting towards much higher combustor pressures, surpassing the nominal critical pressure of the fuel and air. This trend leads to the adoption of supercritical conditions, wherein the liquid fuel is injected into the ambient air at supercritical pressure and temperature, causing the fuel temperature to exceed its nominal critical point. This transition from a liquid-like to a gas-like behavior, known as "transcritical behavior," is a crucial aspect governing the operation of modern high-pressure propulsion and energy conversion systems. In these systems, the primary liquid jet breakup and the subsequent break-up of the resulting droplets into smaller droplets, namely secondary breakup, significantly impact mixing and combustion processes. Despite its importance, there has been a limited focus on droplet breakup at supercritical conditions, particularly at higher flow speeds relevant to high-speed liquid-fuel propulsion systems. Surface tension effects are often neglected in the simulation of transcritical flow, assuming surface tension vanishes beyond the critical point, while recent experiments and molecular dynamics simulations suggest that surface tension effects persist at transcritical conditions. To gain insight into the effects of surface tension on transcritical flows, we have developed a fully compressible multiphaseDirect Numerical Simulation (DNS) approach that accounts for decaying surface effects. The diffuse interface method is employed to represent transcritical interfaces, accounting for surface tension effects calculated using molecular dynamics simulations. This approach is employed to investigate the behavior of subcritical n-dodecane droplets in a supercritical nitrogen environment interacting with a shockwave, aiming to identify the governing breakup regimes at transcritical conditions. The development of quantitative measures enables the generalization of droplet breakup modes for transcritical droplets. The insights gained from this study contribute to advancing the understanding of transcritical liquid breakup, providing valuable knowledge for designing and optimizing high-speed propulsion systemsmore » « less
-
Egolfopoulos, Fokion; Poinsot, Thierry (Ed.)Liquid transportation fuels are composed of a wide range of molecular structures and weights, therefore exhibiting a relatively large distillation temperature range. When fuel chemical properties change along with the distillation temperature curve, preferential vaporization effects could play a role in near-limit combustion behaviors. The objective of this study is to experimentally evaluate the role of preferential vaporization on flame flashback behaviors. A unique spray burner is developed to control the extent of fuel spray vaporization by adjusting flow rates and/or the spray injection location from the burner exit. Spray characteristics are comprehensively determined using Phase Doppler Particle Analyzer. Two binary component mixtures are formulated (n-octane/iso-cetane and iso-octane/n-hexadecane) to exhibit common combustion behaviors in the fully vaporized condition but have considerably different preferential vaporization characteristics. Identical flashback behaviors of two mixtures are observed for fully pre-vaporized conditions by setting the burner temperature at 700 K, including both propagation- and ignition-driven flashback behaviors. Partially vaporized conditions are investigated at two global equivalence ratios (1.0 and 1.4) by setting the burner temperature at 450 K. The flashback behaviors for both global equivalence ratio conditions are found to be affected by the preferential vaporization characteristics represented by laminar flame speeds of the vaporized fuel mixture composition. The relative significance of local flow perturbation induced by instantaneous fuel droplet evaporation near the flame surface has been also investigated by analyzing planar laser-induced fluorescence images, as well as considering the changes of Markstein length with the extent of fuel vaporization. Finally, the relative contributions of local laminar flame speed representing local fuel vapor deposit, local flow perturbation, and preferential vaporization are evaluated through feature sensitivity analyses.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- The DOI is not currently available.
