skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Crystallization of a hydrous magma ocean in the shallow lower mantle
The solidification of a deep magma ocean occurred early in Earth’s history. Although the initial amount of H2O in Earth’s magma ocean is predicted to be low (e.g., <3000 ppm), as an incompatible element it becomes highly enriched (e.g. >10 wt%) in the final few percent of crystallization. In order to understand how a hydrous magma ocean would crystallize at the top of the lower mantle, we determined liquidus phase relations in the MgO-FeOCaO-Al2O3-SiO2-H2O system at 24 GPa. We find that the bridgmanite (brg) + stishovite (st) + melt and bridgmanite (brg) + ferropericlase (fp) + melt cotectic boundary curves trend to Mg-rich melt compositions with decreasing temperature and extend to very high H2O contents (~80 mol% H2O). The brg+st+melt curve is a subtraction curve at < ~18 mol% H2O and a reaction curve at higher H2O contents, whereas the brg+fp+melt is a subtraction curve throughout its length. The density of melts along the two cotectics leads to neutral buoyancywith respect to shallow lower mantle and transition zone minerals at H2O contents up to ~25 mol%. A transient melt-rich layer can form at the top of the lower mantle during late-stage crystallization in a mushy magma ocean when melt percolation dominates. When crystallization exceeds ~98%, hydrous melts (>25 mol% H2O) become buoyant and can percolate into and hydrate the mantle transition zone.  more » « less
Award ID(s):
2022492
PAR ID:
10517914
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
Elsevier
Date Published:
Journal Name:
Earth and Planetary Science Letters
Volume:
633
Issue:
C
ISSN:
0012-821X
Page Range / eLocation ID:
118651
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, Journal of Geophysical Research: Solid Earth)
    Abstract High pressure and temperature experiments were carried out on the oxide mixtures corresponding to the bridgmanite stoichiometry under the hydrous shallow lower mantle conditions (24–25 GPa and 1673–1873 K with 5–10 wt. % of water in the starting material). Oxide mixtures investigated correspond to MgSiO3, (Mg, Fe)SiO3, (Mg, Al, Si)O3, and (Mg, Fe, Al, Si)O3. Melting was observed in all runs. Partitioning of various elements, including Mg, Fe, Si, and H is investigated. Melting under hydrous lower mantle conditions leads to increased (Mg + Fe)O/SiO2in the melt compared to the residual solids. The residual solids often contain a large amount of stishovite, and the melt contains higher (Mg,Fe)O/SiO2ratio than the initial material. (Mg + Fe)O‐rich hydrous melt could explain the low‐velocity anomalies observed in the shallow lower mantle and a large amount of stishovite in the residual solid may be responsible for the scattering of seismic waves in the mid‐lower mantle and may explain the “stishovite paradox. Since stishovite‐rich materials are formed only when silica‐rich source rock (MORB) is melted (not a typical peridotitic rock [bulk silicate Earth]), seismic scattering in the lower mantle provides a clue on the circulation of subducted MORB materials. To estimate hydrogen content, we use a new method of estimating the water content of unquenchable melts, and also propose a new interpretation of the significance of superhydrous phase B inclusions in bridgmanite. The results provide revised values of water partitioning between solid minerals and hydrous melts that are substantially higher than previous estimates. 
    more » « less
  2. ; ; ; ; (, American Mineralogist)
    null (Ed.)
    Abstract Here we present a study on the quenchability of hydrous mafic melts. We show via hydrothermal experiments that the ability to quench a mafic hydrous melt to a homogeneous glass at cooling rates relevant to natural samples has a limit of no more than 9 ± 1 wt% of dissolved H2O in the melt. We performed supra-liquidus experiments on a mafic starting composition at 1–1.5 GPa spanning H2O-undersaturated to H2O-saturated conditions (from ~1 to ~21 wt%). After dissolving H2O and equilibrating, the hydrous mafic melt experiments were quenched. Quenching rates of 20 to 90 K/s at the glass transition temperature were achieved, and some experiments were allowed to decompress from thermal contraction while others were held at an isobaric condition during quench. We found that quenching of a hydrous melt to a homogeneous glass at quench rates comparable to natural conditions is possible at water contents up to 6 wt%. Melts containing 6–9 wt% of H2O are partially quenched to a glass, and always contain significant fractions of quench crystals and glass alteration/devitrification products. Experiments with water contents greater than 9 wt% have no optically clear glass after quench and result in fine-grained mixtures of alteration/devitrification products (minerals and amorphous materials). Our limit of 9 ± 1 wt% agrees well with the maximum of dissolved H2O contents found in natural glassy melt inclusions (8.5 wt% H2O). Other techniques for estimating pre-eruptive dissolved H2O content using petrologic and geochemical modeling have been used to argue that some arc magmas are as hydrous as 16 wt% H2O. Thus, our results raise the question of whether the observed record of glassy melt inclusions has an upper limit that is partially controlled by the quenching process. This potentially leads to underestimating the maximum amount of H2O recycled at arcs when results from glassy melt inclusions are predominantly used to estimate water fluxes from the mantle. 
    more » « less
  3. ; ; ; (, Geology)
    The continental crust is rich in aluminosilicates and formed by the crystallization of arc magmas. However, the magma produced at sub-arc depths is often silica-poor. The chemical evolution of sub-arc magma from silica-poor to aluminosilicate-rich is perplexing. Magnetotelluric (MT) observations in subduction zones and complementary laboratory-based constraints of electrical conductivity (σ) are crucial to understanding this chemical evolution. The σ of a magma is sensitive to pressure (P), temperature (T), and chemistry (X). To date, laboratory-based measurements on the σ of silicate melts have helped to interpret MT observations at P ≤ 2 GPa. Yet, the melting in subduction zones could occur deeper, at P ≤ 6−7 GPa. The σ of melt at such pressures is poorly constrained. To address this, we performed experiments at P ≤ 6 GPa to examine the σ of basaltic to andesitic melts, which are common in subduction zones. We constrained the effects of silica, alumina, alkali, alkaline, and water (H2O) contents on the σ of melt. The activation volume of σ increases with silica contents. Hence, the σ of basaltic melt is overall greater than that of an andesitic counterpart. The σ of basaltic magma is also less sensitive to P than andesitic magma. Water lowers the activation energy and enhances σ for all melt compositions. Our results help constrain how the electrical properties of a magma change with an evolving composition in a subduction zone. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; (, Lithos)
    Understanding the petrological and geochemical processes shaping the Moho transition zone (MTZ) is crucial for advancing our knowledge of thermal and chemical exchanges between the oceanic crust and the residual upper mantle. In this study, we systematically investigate the MTZ outcropped within the Zedong ophiolite, located in the eastern part of the Yarlung-Tsangpo Suture Zone (YTSZ), with the aim of at reconstructing the magmatic processes responsible for generating the petrological Moho. The Zedong MTZ comprises a sequence of dunite, wehrlite, pyroxenite, and gabbro, with frequent occurrences of clinopyroxene-rich lithologies. Cyclicity within the MTZ sequences is characterized by the recurrence of olivine-rich intervals and the presence of zig-zag patterns in both major and trace elements of clinopyroxenes. Zircon Usingle bondPb dating on the Zedong gabbros supports the coeval formation of the Zedong ophiolite with other YTSZ ophiolites. Clinopyroxene in the Zedong MTZ follows a differentiation sequence characterized by an increase in contents of Al2O3 and TiO2, coupled with a decrease in Mg#. This differentiation sequence along with frequent occurrences of amphibole suggest the evolution of a primitive hydrous melt depleted in Al2O3, TiO2, and Na2O. The depleted Ndsingle bondHf isotopes and rare earth element patterns of the MTZ rocks indicate that their parental magmas originated from fluid-enhanced re-melting of a previously depleted mantle. Additionally, we proposed that the initiation of a new subduction zone results in the re-melting of the mantle peridotite, leading to the formation of primitive hydrous basaltic melts. The variable lithologies observed in the Zedong MTZ arise from fractional crystallization and repeated replenishment of hydrous melts. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Geochemistry, Geophysics, Geosystems)
    Abstract Magmas with matrix glass compositions ranging from basalt to dacite erupted from a series of 24 fissures in the first 2 weeks of the 2018 Lower East Rift Zone (LERZ) eruption of Kīlauea Volcano. Eruption styles ranged from low spattering and fountaining to strombolian activity. Major element trajectories in matrix glasses and melt inclusions hosted by olivine, pyroxene and plagioclase are consistent with variable amounts of fractional crystallization, with incompatible elements (e.g., Cl, F, and H2O) becoming enriched by 4–5 times as melt MgO contents evolve from 6 to 0.5 wt%. The high viscosity and high H2O contents (∼2 wt%) of the dacitic melts erupting at Fissure 17 account for the explosive Strombolian behavior exhibited by this fissure, in contrast to the low fountaining and spattering observed at fissures erupting basaltic to basaltic‐andesite melts. Saturation pressures calculated from melt inclusion CO2‐H2O contents indicate that the magma reservoir(s) supplying these fissures was located at ∼2–3 km depth, which is in agreement with the depth of a dacitic magma body intercepted during drilling in 2005 (∼2.5 km) and a seismically imaged lowVp/Vsanomaly (∼2 km depth). Nb/Y ratios in erupted products are similar to lavas erupted between 1955 and 1960, indicating that melts were stored and underwent variable amounts of crystallization in the LERZ for >60 years before being remobilized by a dike intrusion in 2018. We demonstrate that extensive fractional crystallization generates viscous and volatile‐rich magma with potential for hazardous explosive eruptions, which may be lurking undetected at many ocean island volcanoes. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email