An official website of the United States government
Abstract The dimensionless critical shear stress (τ*c) needed for the onset of sediment motion is important for a range of studies from river restoration projects to landscape evolution calculations. Many studies simply assume aτ*cvalue within the large range of scatter observed in gravel‐bedded rivers because direct field estimates are difficult to obtain. Informed choices of reach‐scaleτ*cvalues could instead be obtained from force balance calculations that include particle‐scale bed structure and flow conditions. Particle‐scale bed structure is also difficult to measure, precluding wide adoption of such force‐balanceτ*cvalues. Recent studies have demonstrated that bed grain size distributions (GSD) can be determined from detailed point clouds (e.g. using G3Point open‐source software). We build on these point cloud methods to introduce Pro+, software that estimates particle‐scale protrusion distributions andτ*cfor each grain size and for the entire bed using a force‐balance model. We validated G3Point and Pro+ using two laboratory flume experiments with different grain size distributions and bed topographies. Commonly used definitions of protrusion may not produce representativeτ*cdistributions, and Pro+ includes new protrusion definitions to better include flow and bed structure influences on particle mobility. The combined G3Point/Pro+ provided accurate grain size, protrusion andτ*cdistributions with simple GSD calibration. The largest source of error in protrusion andτ*cdistributions were from incorrect grain boundaries and grain locations in G3Point, and calibration of grain software beyond comparing GSD is likely needed. Pro+ can be coupled with grain identifying software and relatively easily obtainable data to provide informed estimates ofτ*c. These could replace arbitrary choices ofτ*cand potentially improve channel stability and sediment transport estimates.
more »
« less
Improving predictions of critical shear stress in gravel bed rivers: Identifying the onset of sediment transport and quantifying sediment structure
Abstract Understanding when gravel moves in river beds is essential for a range of different applications but is still surprisingly hard to predict. Here we consider how our ability to predict critical shear stress (τc) is being improved by recent advances in two areas: (1) identifying the onset of bedload transport; and (2) quantifying grain‐scale gravel bed structure. This paper addresses these areas through both an in‐depth review and a comparison of new datasets of gravel structure collected using three different methods. We focus on advances in these two areas because of the need to understand how the conditions for sediment entrainment vary spatially and temporally, and because spatial and temporal changes in grain‐scale structure are likely to be a major driver of changes inτc. We use data collected from a small gravel‐bed stream using direct field‐based measurements, terrestrial laser scanning (TLS) and computed tomography (CT) scanning, which is the first time that these methods have been directly compared. Using each method, we measure structure‐relevant metrics including grain size distribution, grain protrusion and fine matrix content. We find that all three methods produce consistent measures of grain size, but that there is less agreement between measurements of grain protrusion and fine matrix content.
more »
« less
- Award ID(s):
- 1921790
- PAR ID:
- 10518524
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Earth Surface Processes and Landforms
- Volume:
- 49
- Issue:
- 8
- ISSN:
- 0197-9337
- Page Range / eLocation ID:
- 2517 to 2537
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Grain force‐balance models utilize grain protrusion and in‐situ resistance force data to evaluate the likely distributions of gravel‐bed sediment entrainment thresholds, specifically dimensionless critical shear stress (τ*c). These methods can give insight into the spatial variability of particle mobilities both within a channel, and between different gravel‐beds, but are yet to be evaluated across multiple sites with varying texture and fabric. We evaluate two published force‐balance approaches: (a) a Monte Carlo style sampling approach using grain size and topography distributions from field measurements; and (b) an automated point cloud segmentation and analysis approach with an updated set of force‐balance equations, Pro+. We compare the workflows, assumptions and inputs for each approach, apply them to an extensive UK‐wide data set comprising 45 upland riverbeds, and evaluate the estimatedτ*cdistributions. We find that mobility thresholds estimated from both methods are variable, with medianτ*cranging from 0.05 to 0.15, and are consistent with published values of approximately 0.02–0.1. Uncertainties in grain sampling strategy or point cloud segmentation quality lead to markedly different grain size distributions between approaches, but their resulting influences onτ*cdistributions are small relative to the range of estimatedτ*c. Sensitivity analyses onτ*cdistributions for grain‐size fractions also show that bed mobilities are sensitive to the roughness height of the velocity profile. We highlight uncertainties associated with these approaches, suggest areas for further targeted comparisons between methods, and provide guidance for the application of grain force‐balance models for estimating entrainment thresholds and bed stability in gravel‐bed rivers.more » « less
-
Abstract Steep, boulder bed streams often contain sediment patches, which are areas of the bed with relatively well‐defined boundaries that are occupied by distinct grain size distributions (GSD). In sediment mixtures, the underlying GSD affects the critical Shields stress for a given grain size, which is commonly predicted using hiding functions. Hiding functions may vary with reach‐wide bed GSD, but the effect of local GSD on relative sediment mobility between sediment patches is poorly understood. We explore the effects of patch‐scale GSD on sediment mobility using tracer particles combined with local shear stresses to develop hiding functions for different patch classes within a steep stream. Hiding functions for all tested patch classes were similar, which indicates that the same hiding function can be used for different patches. However, the critical Shields stress for a given grain size generally decreased with lower patch median grain size (D50) suggesting that patches control the relative mobility of each size through both the underlying GSD and local shear stresses. The effects of the underlying GSD partly depend on grain protrusion, which we measured for all grain sizes present on each patch class. Protrusion was generally greater for larger grains regardless of patch class, but for a given grain size, protrusion was increased with smaller patchD50. For a given grain size, higher protrusion results in greater applied fluid forces and reduced resisting forces to partly explain our lower critical Shields stresses in finer patches. Patches therefore can importantly modulate relative sediment mobility through bed structure and may need to be included in reach‐scale sediment transport and channel stability estimates.more » « less
-
Abstract We calibrated an acoustic pipe microphone system to monitor bedload flux in a sandy, gravel‐bed ephemeral channel. Ours is a first attempt to test the limit of an acoustic surrogate bedload system in a channel with a high content of sand. Calibrations varied in quality; significant data subsetting was required to achieve R2values >0.75. Several data quality issues had to be addressed: (1) apparent pulses, which occur when a sensor records an impulse from sediment impacting the surrounding substrate rather than directly impacting the sensor, were frequent, especially at higher signal amplifications. (2) The impact sensors were frequently covered by gravel sheets. This prompted the development of a cover detection protocol that rejected part of the impact sensor record when at least one sensor was partially or fully covered. (3) Because of the lack of sensor sensitivity to impacts of sand‐sized particles, which was anticipated, and the considerable sand component of bedload in this channel, a grain size‐limited bedload flux was estimated. This was accomplished by sampling the bedload captured by slot samplers and evaluating the variation of grain size with increasing flow strength. This considerably improved the results when compared to attempts at estimating the flux of the entire distribution of grain sizes. This calibration is a successful first attempt, though the impact sensors required several site‐specific calibration steps. A universal set of equations using impact sensors to estimate bedload transport of fine‐gravel with a large content of sand remains elusive. Notwithstanding, our study demonstrates the utility of impact sensor data, producing relatively low root mean square errors that are independent of measurements of flow strength (i.e. discharge). These tools will be particularly useful in settings that would benefit from new methodologies for estimating bedload transport in sand‐rich gravel‐bed rivers, such as the American desert Southwest.more » « less
-
Diversity across algal family Symbiodiniaceae contributes to the environmental resilience of certain coral species. Chlorophyll-afluorescence measurements are frequently used to determine symbiont health and resilience, but more work is needed to refine these tools and establish how they relate to underlying cellular traits. We examined trait diversity in symbionts from the generasCladocopiumandDurusdinium,collected from 12 aquacultured coral species. Photophysiological metrics (ΦPSII, σPSII, ρ, τ1, τ2, antenna bed quenching, non-photochemical quenching, and qP) were assessed using a prototype multi-spectral fluorometer over a variable light protocol which yielded a total of 1,360 individual metrics. Photophysiological metrics were then used to establish four unique light-response phenotypic variants. Corals harboring C15 were predominantly found within a single light-response phenotype which clustered separately from all other coral fragments. The majority ofDurusdiniumdominated colonies also formed a separate light-response phenotype which it shared with a few C1 dominated corals. C15 and D1 symbionts appear to differ in which mechanisms they use to dissipate excess light energy. Spectrally dependent variability is also observed across light-response phenotypes that may relate to differences in photopigment utilization. Symbiont cell biochemical and structural traits (atomic C:N:P, cell size, chlorophyll-a, neutral lipid content) was also assessed within each sample and differ across light-response phenotypes, linking photophysiological metrics with underlying primary cellular traits. Strong correlations between first- and second-order traits, such as Quantum Yield and cellular N:P content, or light dissipation pathways (qP and NPQ) and C:P underline differences across symbiont types and may also provide a means for using fluorescence-based metrics as biomarkers for certain primary-cellular traits.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/esp.5842
