An official website of the United States government
ABSTRACT Cells employ cytoskeletal polymers to move, divide, and pass information inside and outside of the cell. Previous work on eukaryotic cytoskeletal elements such as actin, microtubules, and intermediate filaments investigating the mechanisms of polymerization have been critical to understand how cells control the assembly of the cytoskeleton. Most biophysical analyses have considered cooperative versus isodesmic modes of polymerization; this framework is useful for specifying functions of regulatory proteins that control nucleation and understanding how cells regulate elongation in time and space. The septins are considered a fourth component of the eukaryotic cytoskeleton, but they are poorly understood in many ways despite their conserved roles in membrane dynamics, cytokinesis, and cell shape, and in their links to a myriad of human diseases. Because septin function is intimately linked to their assembled state, we set out to investigate the mechanisms by which septin polymers elongate under different conditions. We used simulations,in vitroreconstitution of purified septin complexes, and quantitative microscopy to directly interrogate septin polymerization behaviors in solution and on synthetic lipid bilayers of different geometries. We first used reactive Brownian dynamics simulations to determine if the presence of a membrane induces cooperativity to septin polymerization. We then used fluorescence correlation spectroscopy (FCS) to assess septins’ ability to form filaments in solution at different salt conditions. Finally, we investigated septin membrane adsorption and polymerization on planar and curved supported lipid bilayers. Septins clearly show signs of salt-dependent cooperative assembly in solution, but cooperativity is limited by binding a membrane. Thus, septin assembly is dramatically influenced by extrinsic conditions and substrate properties and can show properties of both isodesmic and cooperative polymers. This versatility in assembly modes may explain the extensive array of assembly types, functions, and subcellular locations in which septins act. SIGNIFICANCEThe septin cytoskeleton plays conserved and essential roles in cell division, membrane remodeling, and intracellular signaling with links to varied human diseases. Unlike actin and microtubules, whose polymerization dynamics have been extensively characterized, the molecular details of septin polymerization remain poorly understood. Here, we investigate the mode of septin polymerization through the lens of isodesmic and cooperative polymer assembly models in solution, on planar and curved supported membranes, and under different ionic conditions. Our findings show that the mechanisms of septin assembly are highly sensitive to ionic conditions, membrane geometry, and protein concentrations. Notably, assembly can show either cooperative or isodesmic properties depending on context, thereby revealing unexpected plasticity.
more »
« less
Polymerization mechanism of the Candida albicans virulence factor candidalysin
Candida albicans is a commensal fungus that can cause epithelial infections and life-threatening invasive candidiasis. The fungus secretes candidalysin (CL), a peptide that causes cell damage and immune activation by permeation of epithelial membranes. The mechanism of CL action involves strong peptide assembly into polymers in solution. The free ends of linear CL polymers can join, forming loops that become pores upon binding to membranes. CL polymers constitute a therapeutic target for candidiasis, but little is known about CL self-assembly in solution. Here, we examine the assembly mechanism of CL in the absence of membranes using complementary biophysical tools, including a new fluorescence polymerization assay, mass photometry, and atomic force microscopy. We observed that CL assembly is slow, as tracked with the fluorescent marker C-laurdan. Single-molecule methods showed that CL polymerization involves a convolution of four processes. Self-assembly begins with the formation of a basic subunit, thought to be a CL octamer that is the polymer seed. Polymerization proceeds via the addition of octamers, and as polymers grow they can curve and form loops. Alternatively, secondary polymerization can occur and cause branching. Interplay between the different rates determines the distribution of CL particle types, indicating a kinetic control mechanism. This work elucidates key physical attributes underlying CL self-assembly which may eventually evoke pharmaceutical development.
more »
« less
- Award ID(s):
- 2122027
- PAR ID:
- 10522329
- Publisher / Repository:
- Elsevier Inc on behalf of American Society for Biochemistry and Molecular Biology
- Date Published:
- Journal Name:
- Journal of Biological Chemistry
- Volume:
- 300
- Issue:
- 6
- ISSN:
- 0021-9258
- Page Range / eLocation ID:
- 107370
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
The fungus Candida albicans is the most common cause of yeast infections in humans. Like many other disease-causing microbes, it releases several virulent proteins that invade and damage human cells. This includes the peptide candidalysin which has been shown to be crucial for infection. Human cells are surrounded by a protective membrane that separates their interior from their external environment. Previous work showed that candidalysin damages the cell membrane to promote infection. However, how candidalysin does this remained unclear. Similar peptides and proteins cause harm by inserting themselves into the membrane and then grouping together to form a ring. This creates a hole, or ‘pore’, that weakens the membrane and allows other molecules into the cell’s interior. Here, Russell, Schaefer et al. show that candidalysin uses a unique pore forming mechanism to impair the membrane of human cells. A combination of biophysical and cell biology techniques revealed that the peptide groups together to form a chain. This chain of candidalysin proteins then closes in on itself to create a loop structure that can insert into the membrane to form a pore. Once embedded within the membrane, the proteins within the loops rearrange again to make the pores more stable so they can cause greater damage. This type of pore formation has not been observed before, and may open up new avenues of research. For instance, researchers could use this information to develop inhibitors that stop candidalysin from forming chains and harming the membranes of cells. This could help treat the infections caused by C. albicans.more » « less
-
null (Ed.)Supramolecular assembly and PEGylation (attachment of a polyethylene glycol polymer chain) of peptides can be an effective strategy to develop antimicrobial peptides with increased stability, antimicrobial efficacy and hemocompatibility. However, how the self-assembly properties and PEGylation affect their lipid membrane interaction is still an unanswered question. In this work, we use state-of-the-art small angle X-ray and neutron scattering (SAXS/SANS) together with neutron reflectometry (NR) to study the membrane interaction of a series of multidomain peptides, with and without PEGylation, known to self-assemble into nanofibers. Our approach allows us to study both how the structure of the peptide and the membrane are affected by the peptide–lipid interactions. When comparing self-assembled peptides with monomeric peptides that are not able to undergo assembly due to shorter chain length, we found that the nanofibers interact more strongly with the membrane. They were found to insert into the core of the membrane as well as to absorb as intact fibres on the surface. Based on the presented results, PEGylation of the multidomain peptides leads to a slight net decrease in the membrane interaction, while the distribution of the peptide at the interface is similar to the non-PEGylated peptides. Based on the structural information, we showed that nanofibers were partially disrupted upon interaction with phospholipid membranes. This is in contrast with the considerable physical stability of the peptide in solution, which is desirable for an extended in vivo circulation time.more » « less
-
Conformational modulation and polymerization-induced folding of proteomimetic peptide brush polymersPeptide-brush polymers generated by graft-through living polymerization of peptide-modified monomers exhibit high proteolytic stability, therapeutic efficacy, and potential as functional tandem repeat protein mimetics. Prior work has focused on polymers generated from structurally disordered peptides that lack defined conformations. To obtain insight into how the structure of these polymers is influenced by the folding of their peptide sidechains, a set of polymers with varying degrees of polymerization was prepared from peptide monomers that adopt α-helical secondary structure for comparison to those having random coil structures. Circular dichroism and nuclear magnetic resonance spectroscopy confirm the maintenance of the secondary structure of the constituent peptide when polymerized. Small-angle X-ray scattering (SAXS) studies reveal the solution-phase conformation of PLPs in different solvent environments. In particular, X-ray scattering shows that modulation of solvent hydrophobicity, as well as hydrogen bonding patterns of the peptide sidechain, plays an important role in the degree of globularity and conformation of the overall polymer, with polymers of helical peptide brushes showing less spherical compaction in conditions where greater helicity is observed. These structural insights into peptide brush folding and polymer conformation inform the design of these proteomimetic materials with promise for controlling and predicting their artificial fold and morphologymore » « less
-
null (Ed.)Self-assembly of proteins on lipid membranes underlies many important processes in cell biology, such as, exo- and endo-cytosis, assembly of viruses, etc. An attractive force that can cause self-assembly is mediated by membrane thickness interactions between proteins. The free energy profile associated with this attractive force is a result of the overlap of thickness deformation fields around the proteins which can be calculated from the solution of a boundary value problem. Yet, the time scales over which two inclusions coalesce has not been explored, even though the evolution of particle concentrations on membranes has been modeled using phase-field approaches. In this paper we compute this time scale as a function of the initial distance between two inclusions by viewing their coalescence as a first passage time problem. The mean first passage time is computed using Langevin dynamics and a partial differential equation, and both methods are found to be in excellent agreement. Inclusions of three different shapes are studied and it is found that for two inclusions separated by about hundred nanometers the time to coalescence is hundreds of milliseconds irrespective of shape. An efficient computation of the interaction energy of inclusions is central to our work. We compute it using a finite difference technique and show that our results are in excellent agreement with those from a previously proposed semi-analytical method based on Fourier–Bessel series. The computational strategies described in this paper could potentially lead to efficient methods to explore the kinetics of self-assembly of proteins on lipid membranes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1016/j.jbc.2024.107370
