An official website of the United States government
We study theoretically and experimentally pressure-driven flow between a flat wall and a parallel corrugated wall, a design used widely in microfluidics for low-Reynolds-number mixing and particle separation. In contrast to previous work, which focuses on recirculating helicoidal flows along the microfluidic channel that result from its confining lateral walls, we study the three-dimensional pressure and flow fields and trajectories of tracer particles at the scale of each corrugation. Employing a perturbation approach for small surface roughness, we find that anisotropic pressure gradients generated by the surface corrugations, which are tilted with respect to the applied pressure gradient, drive transverse flows. We measure experimentally the flow fields using particle image velocimetry and quantify the effect of the ratio of the surface wavelength to the channel height on the transverse flows. Further, we track tracer particles moving near the surface structures and observe three-dimensional skewed helical trajectories. Projecting the helical motion to two dimensions reveals oscillatory near-surface motion with an overall drift along the surface corrugations, reminiscent of earlier experimental observations and independent of the secondary helical flows that are induced by confining lateral walls. Finally, we quantify the hydrodynamically induced drift transverse to the mean flow direction as a function of distance to the surface and the wavelength of the surface corrugations.
more »
« less
Surface-segregating zwitterionic copolymers to control poly(dimethylsiloxane) surface chemistry
We introduce a novel, simple, fast, and scalable method to enhance PDMS surface hydrophilicity and prevent nonspecific adsorption by incorporating a surface-segregating zwitterionic copolymer during fabrication.
more »
« less
- PAR ID:
- 10523431
- Publisher / Repository:
- RSC
- Date Published:
- Journal Name:
- Journal of Materials Chemistry B
- Volume:
- 12
- Issue:
- 1
- ISSN:
- 2050-750X
- Page Range / eLocation ID:
- 145 to 157
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper presents a study of the grinding of three different grades of silicon carbide (SiC) under the same conditions. Surface topography is analyzed using coherent scanning interferometry and scanning electron microscopy. The study provides a baseline understanding of the process mechanics and targets effective selection of process parameters for grinding SiC optics with near optical level surface roughness, thus reducing the need for post-polishing. Samples are raster and spiral ground on conventional precision machines with metal and copper-resin bonded wheels under rough, medium, and finish grinding conditions. Material microstructure and grinding conditions affect attainable surface roughness. Local surface roughness of less than 3 nm RMS was attained in both chemical vapor deposition (CVD) and chemical vapor composite (CVC) SiC. The tool footprint is suitable for sub-aperture machining of a large freeform optics possibly without the need for surface finish correction by post-polishing. Subsurface damage will be assessed in Part 2 of this paper series.more » « less
-
Abstract. The pathways and fate of freshwater in the East Greenland Coastal Current (EGCC) are crucial to the climate system. The EGCC transports large amounts of freshwater in close proximity to sites of deep open-ocean convection in the Labrador and Irminger seas. Many studies have attempted to analyze this system from models and various observational platforms, but the modeling results largely disagree with one another, and observations are limited due to the harsh conditions typical of the region. Altimetry-derived surface currents, constructed from remote-sensing observations and applying geostrophic equations, provide a continuous observational data set beginning in 1993. However, these products have historically encountered difficulties in coastal regions, and thus their validity must be checked. In this work, we use a comprehensive methodology to compare these Eulerian data to a Lagrangian data set of 34 surface drifter trajectories and demonstrate that the altimetry-derived surface currents are surprisingly capable of recovering the spatial structure of the flow field on the south Greenland shelf and can mimic the Lagrangian nature of the flow as observed from surface drifters.more » « less
-
The surface states of photoelectrodes as catalysts heavily influence their performance in photocatalysis and photoelectrocatalysis applications. These catalysts are necessary for developing robust solutions to the climate and global energy crises by promoting CO2 reduction, N2 reduction, contaminant degradation, and water splitting. The semiconductors that can fill this role are beholden as photoelectrodes to the processes of charge generation, separation, and utilization, which are in turn products of surface states, surface electric fields, and surface carrier dynamics. Methods which are typically used for studying these processes to improve semiconductors are indirect, invasive, not surface specific, not practical under ambient conditions, or a combination thereof. Recently, nonlinear optical processes such as electronic sum-frequency generation (ESFG) and second-harmonic generation (ESHG) have gained popularity in investigations of semiconductor catalysts systems. Such techniques possess many advantages of in-situ analysis, interfacial specificity, non-invasiveness, as well as the ability to be used under any conditions. In this review, we detail the importance of surface states and their intimate relationship with catalytic performance, outline methods to investigate semiconductor surface states, electric fields, and carrier dynamics and highlight recent contributions to the field through interface-specific spectroscopy. We will also discuss how the recent development of heterodyne-detected ESHG (HD-ESHG) was used to extract charged surface states through phase information, time-resolved ESFG (TR-ESFG) to obtain in-situ dynamic process monitoring, and two-dimensional ESFG (2D-ESFG) to explore surface state couplings, and how further advancements in spectroscopic technology can fill in knowledge gaps to accelerate photoelectrocatalyst utilization. We believe that this work will provide a valuable summary of the importance of semiconductor surface states and interfacial electronic properties, inform a broad audience of the capabilities of nonlinear optical techniques, and inspire future original approaches to improving photocatalytic and photoelectrocatalytic devices.more » « less
-
AbstractMaterials science is about understanding the relationship between a material’s structure and its properties—in the sphere of mechanical behavior, this includes elastic modulus, yield strength, and other bulk properties. We show in this issue that, analogously, a material’s surface structure governs its surface properties—such as adhesion, friction, and surface stiffness. For bulk materials, microstructure is a critical component of structure; for surfaces, the structure is governed largely by surface topography. The articles in this issue cover the latest understanding of these structure–property connections for surfaces. This includes both the theoretical basis for how properties depend on topography, as well as the latest understanding of how surface topography emerges, how to measure and understand topography-dependent properties, and how to engineer surfaces to improve performance. The present article frames the importance of surface topography and its effect on properties; it also outlines some of the critical knowledge gaps that impede progress toward optimally performing surfaces. Graphical abstractmore » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1039/D3TB02164E
