The evergrowing plastic production and the caused concerns of plastic waste accumulation have stimulated the need for waste plastic chemical recycling/valorization. Current methods suffer from harsh reaction conditions and long reaction time. Herein we demonstrate a non-thermal plasma-assisted method for rapid hydrogenolysis of polystyrene (PS) at ambient temperature and atmospheric pressure, generating high yield (>40 wt%) of C1–C3hydrocarbons and ethylene being the dominant gas product (Selectivity of ethylene,
This content will become publicly available on October 4, 2024
- Award ID(s):
- 2152119
- NSF-PAR ID:
- 10523434
- Publisher / Repository:
- Matter
- Date Published:
- Journal Name:
- Matter
- Volume:
- 6
- Issue:
- 10
- ISSN:
- 2590-2385
- Page Range / eLocation ID:
- 3413 to 3433
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
more » « less
Abstract S C2H4 > 70%) within ~10 min. The fast reaction kinetics is attributed to highly active hydrogen plasma, which can effectively break bonds in polymer and initiate hydrogenolysis under mild condition. Efficient hydrogenolysis of post-consumer PS materials using this method is also demonstrated, suggesting a promising approach for fast retrieval of small molecular hydrocarbon modules from plastic materials as well as a good capability to process waste plastics in complicated conditions. -
more » « less
Abstract This study focused on evaluating the reduction of chlorine content in waste polyvinyl chloride (WPVC) through high‐temperature catalytic hydrothermal treatment (HTT). Catalytic HTT experiments were carried out to evaluate the effect of noble metal catalysts (Ru/C, Pt/C, and Pd/C), residence time (0.5, 1, 2, and, 4 h), reaction temperature (300, 325, and 350°C), and catalyst loading (0, 5, and 10 wt%). The findings indicated that dechlorination efficiency can be achieved by 99.01% at 350°C and 1 h, with 10 wt% Pd/C loading. Based on chlorine balance, the chlorine content of the solid phase significantly decreased from 568.8 to 5.64 g kg−1at the same condition. The catalytic HTT solid residue ash has low chlorine content under most operational conditions. These results suggest that catalytic HTT is an effective method to dechlorinate WPVC as a high‐halogenated waste plastic in order to reduce its harmful effect on the environment.
-
Subramaniam, B. Executive Editor (Ed.)This research presents pioneering work on transforming a variety of waste plastic into synthetic graphite of high quality and purity. Six recycled plastics in various forms were obtained – including reprocessed polypropylene, high-density polyethylene flakes, shredded polyethylene films, reprocessed polyethylene (all obtained from Pennsylvania Recycling Markets Center), polystyrene foams and polyethylene terephthalate bottles (both sourced from a local recycling bin). The waste plastics were carbonized in sealed tubing reactors. The study shows that this versatile process can be used on a mix of waste plastics in a variety of recycled forms to obtain a uniform graphitic carbon phase, hence addressing the challenges of separation and transportation faced by the plastic recycling industry. The conversion yield to elemental carbon for recycled plastics was improved by up to 250% by using graphene oxide (GO) additives. Five different grades of GO and graphene were used to gain insights into the interaction mechanisms between plastics and GO during pyrolysis. The effect of GO additives on carbonization was analyzed using thermogravimetric analysis / differential scanning calorimetry and ReaxFF-based reactive molecular dynamics simulations. The obtained cokes were graphitized at 2500 ℃ and the graphitic quality of the synthetic graphites was analyzed using X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The plastic waste-derived synthetic graphites exhibit remarkable graphitic quality with crystallite sizes comparable with a model graphitizable material – anthracene coke. The thin, flake-like morphology and nanostructure featuring well-stacked contiguous lamellae make these graphitic carbons highly promising candidates for energy storage applications. Based on our experiments and atomistic-scale simulations we propose interaction mechanisms between the plastic polymers and the graphenic additives that explain the chemical conversion pathways for GO-assisted waste plastic carbonization and graphitization.more » « less
-
Effect of Acidic Hydrochar on Plastic Crude Oil Produced from Hydrothermal Liquefaction of Waste PVCIn this study, the effect of hydrothermal liquefaction (HTL) of waste PVC was investigated in the presence of acidic hydrochar. The hydrochar was prepared by hydrothermal carbonization of pineapple waste at 250 °C and at 1 h in the presence of citric acid. Hydrochar was acidic, stable, and porous and contained acidic functional groups. Hydrochar was co-fed with PVC during HTL to enhance HTL conversion and quality of the plastic crude oil. HTL experiments were performed at 300–350 °C, 0.25–4 h of reaction times, and 0–20 wt% hydrochar-to-PVC ratio. The plastic crude oil was separated from the solid residue to evaluate HTL conversion and to analyze elemental compositions, boiling point distribution, alteration of chemical bonds, and chemical compositions. The results showed that acidic hydrochar enhances HTL conversion with a maximum value of 28.75 at 5 wt% hydrochar content at 350 °C and 0.5 h. Furthermore, plastic crude oils contained no chloride but contained significantly high carbon and hydrogen, resulting in a higher heating value of up to 36.43 MJ/kg. The major component of the plastic crude oil was 3, 5 dimethylphenol produced ranging from 61.4 to 86.4% (percentage of total identified area) according to gas chromatography mass spectroscopy (GCMS) data.more » « less
-
more » « less
Abstract Producing hydrochar from landfill municipal solid wastes (MSW) is a sustainable alternative to existing waste management practices in low‐ and middle‐income countries. In this study, mixed MSW feedstock (sent for landfilling) was subjected to hydrothermal carbonization to produce hydrochars. The hydrochar showing the highest heating value was subjected to pyrolysis at 5, 10, and 20 K min−1heating rates. Based on the pyrolysis characteristics, a three pseudo‐component‐based distributed activation energy model was employed to describe the pyrolysis kinetics. The activation energy distributions for the three pseudo‐components were 140 ± 8.7 kJ mol−1, 190 ± 1 kJ mol−1and 175.9 ± 24.9 kJ mol−1, which were able to predict the pyrolysis profile at all heating rates with
R 2 > 0.999. Differential thermogravimetric profiles of the hydrochar revealed its pyrolytic reactivity to resemble lignocellulosic constituents. Fourier‐transform infrared analysis of the hydrochar showed retention of oxygen‐containing functional groups (associated with lignocellulosic constituents) from the parent feedstock. © 2022 Society of Chemical Industry and John Wiley & Sons, Ltd.
