Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Exceptional thermal conductivity increase of Nafion by hydrogen-bonded water molecules
Nafion, a widely used proton exchange membrane in fuel cells, is a representative perfluorosulfonic acid membrane consisting of a hydrophobic Teflon backbone and hydrophilic sulfonic acid side chains. Its thermal conductivity (k) is critical to fuel cell's thermal management. During fuel cell operation, water molecules inevitably enter Nafion and could strongly affect its k. In this work, we measure the k of Nafion of different water content (λ). Findings reveal that k is significantly low in a vacuum environment characterized as 0.110 W m−1 K−1, but at λ ∼1, a notable increase is observed, reaching 0.162 W m−1 K−1. Moreover, k at λ ≈ 6 is 60% higher than that of λ ∼1. This exceptional k increase is far beyond the theoretical prediction by the effective medium theory that only considers simply physical mixing. Rather this k increase is attributed to the formation of water clusters and channels with increased λ, creating thermal pathways through hydrogen bonding, thereby improving chemical connections within the Nafion structure and augmenting its k. Furthermore, it is observed that Nafion's k reaches the maximum value of 0.256 W m−1 K−1 at λ ≈ 6, with no further increase up to λ ≈ 10.5. This phenomenon is explained by the coalescence of water clusters at λ ≈ 6, forming channels that optimize heat transfer pathways and connections within the Nafion structure. Moreover, the free movement of water molecules within water channels (λ > 6) shows physical alterations in Nafion structure (significant volume increase), which have a lesser impact on k.  more » « less
Award ID(s):
2032464
PAR ID:
10524712
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
AIP
Date Published:
Journal Name:
Applied Physics Letters
Volume:
124
Issue:
26
ISSN:
0003-6951
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, European Journal of Soil Science)
    Abstract Biocrusts are a critical surface cover in global drylands, but knowledge about their influences on surface soil thermal properties are still lacking because it is quite challenging to make accurate thermal property measurements for biocrust layers, which are only millimetres thick. In this study, we repacked biocrust layers (moss‐ and cyanobacteria‐dominated, respectively) that had the same material as the original intact biocrusts but was more homogeneous and thicker. The thermal conductivity (λ), heat capacity (C) and thermal diffusivity (k) of the repacked and intact biocrusts were measured by the heat pulse (HP) technique at different mass water contents (θm) and mass ratios (Wt), and the differences between repacked and intact biocrusts were analysed. Our results show that biocrusts substantially alter the thermal properties of the soil surface. The averageλof moss (0.37 W m−1 K−1) and cyanobacteria biocrusts (0.90 W m−1 K−1) were reduced by 63.0% and 10.3% compared with bare soil (1.00 W m−1 K−1), respectively. Edge effects including heat loss and water evaporation caused theλandkof the biocrusts to be underestimated, but theCto be overestimated. The differences in thermal properties were significant (p <0.001), except for the differences in thermal conductivity between repacked and intact cyanobacteria biocrusts, which were not significant (p = 0.379). Specifically, in the volumetric water content (θv) range of 0 to 20%, theλandkof the repacked moss biocrusts were underestimated by 59.1% and 61.8%, respectively, and theCwas overestimated by 23.9% compared with the intact moss biocrusts. Theλandkof the repacked cyanobacteria biocrusts were underestimated by 15.8% and 79.2%, respectively, and theCwas overestimated by 34.8% compared with the intact cyanobacteria biocrusts at theθvrange of 0 to 30%. Typically, this difference increased as theθvrises between repacked and intact biocrusts. Our new measurements provide evidence that the thermal properties of biocrusts were previously misjudged due to the measurement limitations imposed by their limited thickness when measured in situ. Biocrusts are likely more significant in regulating soil heat and temperature in drylands than was previously assumed. 
    more » « less
  2. ; ; ; (, Rare Metals)
    ABSTRACT Zirconium diboride (ZrB2) is a promising material for extreme‐environment applications, yet its intrinsic high‐temperature thermophysical behavior remains uncertain: Experiments are highly sensitive to processing conditions, simulations omit key mechanisms, and both rarely reach ultrahigh temperatures. Here, we predict the thermal conductivity (κ), heat capacity, and thermal expansion of ZrB2from 300 to 3500 K using first principles, explicitly incorporating phonon and electron transport, high‐order phonon scattering, and temperature‐dependent force constants. We estimate that the intrinsic room‐temperature polycrystallineκis ∼169 W m−1 K−1, exceeding the highest experimental value (∼141 W m−1 K−1) limited by microstructural defects, and decreases monotonically to 64.5 W m−1 K−1at 3500 K. Remarkably, this magnitude rivals that of the most refractory metal, tungsten, whereas ZrB2's density is three times lower, underscoring its potential for lightweight thermal management. Importantly, electrons dominate heat transport across the entire temperature range, carrying ∼61% ofκat 300 K and ∼91% at 3500 K, indicating that previous research focused solely on phonon engineering may have overlooked the governing role of electronic conduction. The Lorenz number varies non‐monotonically with temperature, deviating significantly from the Sommerfeld valueL0, indicating that the common assumption of constantL0may lead to inaccurate thermal–electrical correlations. Phonons dominate heat capacity, though electronic contributions become notable above 1300 K (≈6% at 3500 K). For phonon transport, heat is primarily carried by acoustic modes (≈89% at 300 K) and limited by three‐phonon and electron‐phonon scattering. Counter‐intuitively, four‐phonon scattering is negligible at room temperature, despite the large acoustic–optical gap, because broad optical bands preserve key three‐phonon channels, though the four‐phonon scattering becomes significant at highT. Interestingly, isotopic purification would raise phonon thermal conductivity by ∼23%, whereas temperature‐dependent force constants increase it by 28% at room temperature. Finally, compared with related systems, ZrB2exhibits nearly twice the thermal conductivity of ZrC at room temperature, mainly because of its significantly higher electronic contribution while maintaining a higher phonon component despite its more complex structure. Althoughκfor ZrB2decreases with temperature, whereas that of ZrC rises, ZrB2remains superior across the entire temperature range. This work clarifies the intrinsic thermal transport physics of ZrB2and highlights its exceptional potential for high‐temperature thermal‐management and aerospace applications. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, ACS Omega)
    Based on the search for new biodegradable materials that are low cost and easy to synthesize by environmentally friendly methods, we report the use of carrageenan membranes (mixture of κ and λ carrageenans) with different concentrations of titanium dioxide nanoparticles (TiO2 NPs) and Ni/CeO2 (10 wt % Ni) for the fabrication of a novel fuel cell electrode for the oxidation of ethanol. Each membrane was characterized to determine its physicochemical properties using X-ray diffraction (XRD), differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) spectroscopy. Using impedance spectroscopy (IS), a maximum value of 2.08 × 10−4 S/cm in ionic conductivity was found for the carrageenan nanocomposite with a concentration of 5 wt % TiO2 NPs (CR5%). Due to its high conductivity values, the CR5% membrane was mixed with Ni/CeO2 to prepare the working electrode for cyclic voltammetry measurements. Using a solution of 1 M ethanol and 1 M KOH, the oxidation of ethanol over CR5% + Ni/CeO2 resulted in peak current density values at forward and reverse scan voltages of 9.52 and 12.22 mA/cm2, respectively. From our results, the CR5% + Ni/CeO2 membrane proves to be more efficient in the oxidation of ethanol compared with commercially available Nafion membranes containing Ni/CeO2. 
    more » « less
  4. ; ; ; ; (, Journal of Materials Chemistry C)
    Materials with low thermal conductivity are essential to providing thermal insulation to many technological systems, such as electronics, thermoelectrics and aerospace devices. Here, we report ultra-low thermal conductivity of two oxide materials. Sr 2 FeCoO 6−δ has a perovskite-type structure with oxygen vacancies. It shows a thermal conductivity of 0.5 W m −1 K −1 , which is lower than those reported for perovskite oxides. The incorporation of calcium to form Ca 2 FeCoO 6−δ , leads to a structural change and the formation of different coordination geometries around the transition metals. This structural transformation results in a remarkable enhancement of the thermal insulation properties, showing the ultra-low thermal conductivity of 0.05 W m −1 K −1 , which is one of the lowest values found among solid materials to date. A comparison to previously reported perovskite oxides, which show significantly inferior thermal insulation compared to our materials, points to the effect of oxygen-vacancies and their ordering on thermal conductivity. 
    more » « less
  5. ; ; ; ; ; ; ; (, Physical Chemistry Chemical Physics)
    Pulsed field gradient (PFG) NMR in combination with quasielastic neutron scattering (QENS) was used to investigate self-diffusion of water and acetone in Nafion membranes with and without immobilized vanillic acid (VA). Complementary characterization of these membranes was performed by small angle X-ray scattering (SAXS) and NMR relaxometry. This study was motivated by the recent data showing that an organic acid, such as VA, in Nafion can preserve its catalytic activity in the presence of water even at high intra-polymer water concentrations corresponding up to 100% ambient relative humidity. However, there is currently no clear understanding of how immobilized organic acid molecules influence the microscopic transport properties and related structural properties of Nafion. Microscopic diffusion data measured by PFG NMR and QENS are compared for Nafion with and without VA. For displacements smaller than the micrometer-sized domains previously reported for Nafion, the VA addition was not observed to lead to any significant changes in the water and/or acetone self-diffusivity measured by each technique inside Nafion. However, the reported PFG NMR data present evidence of a different influence of acetone concentration in the membranes with and without VA on the water permeance of the interfaces between neighboring micrometer-sized domains. The reported diffusion data are correlated with the results of SAXS structural characterization and NMR relaxation data for water and acetone. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email