An official website of the United States government
A linear elastic circular disc is analyzed under a self-equilibrated system of loads applied along its boundary. A distinctive feature of the investigation, conducted using complex variable analysis, is the assumption that the material is incompressible (in its linearized approximation), rendering the governing equations formally identical to those of Stokes flow in viscous fluids. After deriving a general solution to the problem, an isoperimetric constraint is introduced at the boundary to enforce inextensibility. This effect can be physically realized, for example, by attaching an inextensible elastic rod with negligible bending stiffness to the perimeter. Although the combined imposition of material incompressibility and boundary inextensibility theoretically prevents any deformation of the disc, it is shown that the problem still admits non-trivial solutions. This apparent paradox is resolved by recognizing the approximations inherent in the linearized theory, as confirmed by a geometrically nonlinear numerical analysis. Nonetheless, the linear solution retains significance: it may represent a valid stress distribution within a rigid system and can identify critical conditions of interest for design applications.
more »
« less
Bifurcations of an elastic disc coated with an elastic inextensible rod
An analytical solution is derived for the bifurcations of an elastic disc that is constrained on the boundary with an isoperimetric Cosserat coating. The latter is treated as an elastic circular rod, either perfectly or partially bonded (with a slip interface in the latter case) and is subjected to three different types of uniformly distributed radial loads (including hydrostatic pressure). The proposed solution technique employs complex potentials to treat the disc’s interior and incremental Lagrangian equations to describe the prestressed elastic rod modelling the coating. The bifurcations of the disc occur with modes characterized by different circumferential wavenumbers, ranging between ovalization and high-order waviness, as a function of the ratio between the elastic stiffness of the disc and the bending stiffness of its coating. The presented results find applications in various fields, such as coated fibres, mechanical rollers, and the growth and morphogenesis of plants and fruits.
more »
« less
- Award ID(s):
- 2112894
- PAR ID:
- 10524814
- Publisher / Repository:
- Royal Society
- Date Published:
- Journal Name:
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Volume:
- 480
- Issue:
- 2281
- ISSN:
- 1364-5021
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We study the deformations of elastic filaments confined within slowly shrinking circular boundaries, under contact forces with friction. We perform computations with a spring-lattice model that deforms like a thin inextensible filament of uniform bending stiffness. Early in the deformation, two lobes of the filament make contact. If the friction coefficient is small enough, one lobe slides inside the other; otherwise, the lobes move together or one lobe bifurcates the other. There follows a sequence of deformations that is a mixture of spiralling and bifurcations, primarily the former with small friction and the latter with large friction. With zero friction, a simple model predicts that the maximum curvature and the total elastic energy scale as the wall radius to the − 3 / 2 and − 2 powers, respectively. With non-zero friction, the elastic energy follows a similar scaling but with a prefactor up to eight times larger, due to delayering and bending with a range of small curvatures. For friction coefficients as large as 1, the deformations are qualitatively similar with and without friction at the outer wall. Above 1, the wall friction case becomes dominated by buckling near the wall.more » « less
-
A spatially periodic structure of heterogeneous elastic rods that periodically oscillate along their axes is proposed as a time-modulated phononic crystal. Each rod is a bi-material cylinder, consisting of periodically distributed slices with significantly different elastic properties. The rods are imbedded in an elastic matrix. Using a plane wave expansion, it is shown that the dispersion equation for sound waves is obtained from the solutions of a quadratic eigenvalue problem over the eigenfrequency ω. The coefficients of the corresponding quadratic polynomial are represented by infinite matrices defined in the space spanned by the reciprocal lattice vectors, where elements depend on the velocity of translation motion of the rods and Bloch vector k. The calculated band structure exhibits both ω and k bandgaps. If a frequency gap overlaps with a momentum gap, a mixed gap is formed. Within a mixed gap, ω and k acquire imaginary parts. A method of analysis of the dispersion equation in complex ω−k space is proposed. As a result of the high elastic contrast between the materials in the bi-material rods, a substantial depth of modulation is achieved, leading to a large gap to midgap ratio for the frequency, momentum, and mixed bandgaps.more » « less
-
There is a lack of cleaning robots dedicated to the scrubbing of contaminated surfaces. Contaminated surfaces in domestic and industrial settings typically require manual scrubbing which can be costly or hazardous. There is growing demand for automated sanitization systems in hospitals, foodprocessing plants, and other settings where cleanliness of surfaces is important. To address the opportunity to automate the scrubbing of surfaces, this work focuses on the use of series elastic actuators which can apply consistent trajectories of scrubbing force. Consistent force during scrubbing increases the rate of removal for a contaminant. An elastic robot which has rigid links and low-stiffness joints can perform friction-based cleaning of surfaces with complex geometries while maintaining consistent scrubbing force. This study uses a hybrid forceposition control scheme and a low-cost elastic robot to perform scrubbing. This study observes the relationship between joint stiffness in the robot and the disturbance rejection for force-based control during scrubbing.more » « less
-
Cells self-organize into functional, ordered structures during tissue morphogenesis, a process that is evocative of colloidal self-assembly into engineered soft materials. Understanding how intercellular mechanical interactions may drive the formation of ordered and functional multicellular structures is important in developmental biology and tissue engineering. Here, by combining an agent-based model for contractile cells on elastic substrates with endothelial cell culture experiments, we show that substrate deformation–mediated mechanical interactions between cells can cluster and align them into branched networks. Motivated by the structure and function of vasculogenic networks, we predict how measures of network connectivity like percolation probability and fractal dimension as well as local morphological features including junctions, branches, and rings depend on cell contractility and density and on substrate elastic properties including stiffness and compressibility. We predict and confirm with experiments that cell network formation is substrate stiffness dependent, being optimal at intermediate stiffness. We also show the agreement between experimental data and predicted cell cluster types by mapping a combined phase diagram in cell density substrate stiffness. Overall, we show that long-range, mechanical interactions provide an optimal and general strategy for multicellular self-organization, leading to more robust and efficient realizations of space-spanning networks than through just local intercellular interactions.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.1098/rspa.2023.0491
