skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: CuTi as Potential Liner- and Barrier-Free Interconnect Conductor
CuTi layers are co-sputter deposited on 20-nm-SiO2/Si(001) wafers at 350 ℃ to quantify their stability in direct contact with a dielectric and to explore the potential of CuTi as barrier- and liner-free interconnect metal. X-ray diffraction pole figures indicate a preferred 001 out-of-plane crystalline orientation and Rutherford backscattering confirms a stoichiometric composition. Vacuum annealing tests at 450 ℃ of CuTi layers indicate considerably higher thermal stability than for pure Cu layers, including negligible dewetting observed by scanning electron microscopy and negligible intermixing with the oxide substrate quantified by photoelectron spectroscopy. Four-point bend tests show a 25% higher interfacial toughness for CuTi/SiO2 than Cu/SiO2 interfaces. CuTi/SiO2 samples also exhibit a 300-times longer failure time than Cu/SiO2 during time-dependent dielectric breakdown tests using an externally applied 3 MV/cm electric field. The higher stability of CuTi in comparison to Cu is attributed to a higher cohesive energy in combination with an atomically thin self-limiting Ti oxide layer at the CuTi/SiO2 interface.  more » « less
Award ID(s):
2328906
PAR ID:
10525177
Author(s) / Creator(s):
;
Publisher / Repository:
IEEE
Date Published:
Journal Name:
IEEE Transactions on Electron Devices
Volume:
71
Issue:
5
ISSN:
0018-9383
Page Range / eLocation ID:
3252 to 3257
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Nanomaterials)
    We report the first direct synthesis of graphene on SiO2/Si by hot-filament chemical vapor deposition. Graphene deposition was conducted at low pressures (35 Torr) with a mixture of methane/hydrogen and a substrate temperature of 970 °C followed by spontaneous cooling to room temperature. A thin copper-strip was deposited in the middle of the SiO2/Si substrate as catalytic material. Raman spectroscopy mapping and atomic force microscopy measurements indicate the growth of few-layers of graphene over the entire SiO2/Si substrate, far beyond the thin copper-strip, while X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy showed negligible amounts of copper next to the initially deposited strip. The scale of the graphene nanocrystal was estimated by Raman spectroscopy and scanning electron microscopy. 
    more » « less
  2. ; ; ; ; ; ; ; (, Proceedings of the National Academy of Sciences)
    SrTiO 3 (STO) is an incipient ferroelectric perovskite oxide for which the onset of ferroelectric order is suppressed by quantum fluctuations. This property results in a very large increase in static dielectric constant from ∼300 at room temperature to ∼20,000 at liquid He temperature in bulk single crystals. However, the low-temperature dielectric constant of epitaxial STO films is typically a few hundred to a few thousand. Here, we use all-epitaxial capacitors of the form n -STO/undoped STO/ n -STO (001) prepared by hybrid molecular beam epitaxy, to demonstrate intrinsic dielectric constants of an unstrained STO (001) film exceeding 25,000. We show that the n -STO/undoped STO interface plays a critically important role not previously considered in determining the dielectric properties that must be properly accounted for to determine the intrinsic dielectric constant. 
    more » « less
  3. ; ; ; (, Colloids and Surfaces A: Physicochemical and Engineering Aspects)
    Graphene oxide (GO) membranes, known for their high dielectric constant and low dielectric loss, have emerged as promising separators for advanced energy storage and transfer devices. While previous research has focused on the aqueous stability enhancement by high-valence metal cations, their effect on modifying the dielectric properties of GO membranes remains understudied. This study investigates the impact of transition metal cation modification on the aqueous stability and dielectric properties of graphene oxide (GO) membranes. Multivalent transition metal chlorides (FeCl3, FeCl2, CuCl2, and CuCl) were introduced during the self-assembly process to create modified GO membranes. The membranes were characterized using various techniques, including zeta potential measurements, contact angle measurements, FTIR spectroscopy, and XRD spectroscopy. The aqueous stability of the modified membranes was evaluated, and their dielectric performance was assessed using capacitance measurements across a frequency range of 0.1 Hz to 105 Hz. The results demonstrate that the choice of transition metal cation and its oxidation state significantly influence the morphology, aqueous stability, and dielectric properties of the GO membranes. Notably, Fe3+ and Cu2+ modifications enhanced aqueous stability, while Fe2+ and Cu+ modifications improved dielectric performance. This study provides insights into tailoring the properties of GO membranes for various applications, including energy storage and transfer devices. 
    more » « less
  4. ; (, Materials Research Society)
    The major focus of artificial intelligence (AI) research is made on biomimetic synaptic processes that are mimicked by functional memory devices in the computer industry [1]. It is urgent to find a memory technology for suiting with Brain-Inspired Computing to break the von Neumann bottleneck which limits the efficiency of conventional computer architectures [2]. Silicon-based flash memory, which currently dominates the market for data storage devices, is facing challenging issues to meet the needs of future data storage device development due to the limitations, such as high-power consumption, high operation voltage, and low retention capacity [1]. The emerging resistive random-access memory (RRAM) has elicited intense research as its simple sandwiched structure, including top electrode (TE) layer, bottom electrode (BE) layer, and an intermediate resistive switching (RS) layer, can store data using RS phenomenon between the high resistance state (HRS) and the low resistance state (LRS). This class of emerging devices is expected to outperform conventional memory devices [3]. Specifically, the advantages of RRAM include low-voltage operation, short programming time, great cyclic stability, and good scalability [4]. Among the materials for RS layer, indium gallium zinc oxide (IGZO) has attracted attention because of its abundance and high atomic diffusion property of oxygen atoms, transparency, and its easily modulated electrical properties by controlling the stoichiometric ratio of indium and gallium as well as oxygen potential in the sputter gas [5, 6]. Moreover, since the IGZO can be applied to both the thin-film transistor (TFT) channel and RS layer, the IGZO-based fully integrated transparent electronics are very promising [5]. In this work, we proposed transparent IGZO-based RRAMs. First, we chose ITO to serve as both TE and BE to achieve high transmittance in the visible regime of light. All three layers (TE, RS, BE layers) were deposited using a multi-target magnetron sputtering system on glass substrates to demonstrate fully transparent oxide-based devices. I-V characteristics were evaluated by a semiconductor parameter analyzer, and our devices showed typical butterfly curves indicating the bipolar RS property. And the IGZO-based RRAM can survive more than 50 continuous sweeping cycles. The optical transmission analysis was carried out via an UV-Vis spectrometer and the average transmittance around 80% out of entire devices in the visible-light wavelength range, implying high transparency. To investigate the thickness dependence on the properties of RS layer, 50nm, 100nm and 150nm RS layer of IGZO RRAM were fabricated. Also, the oxygen partial pressure during the sputtering of IGZO was varied to optimize the property because the oxygen vacancy concentration governs the RS and RRAM performance. Electrode selection is crucial and can impact the performance of the whole device [7]. Thus, Cu TE was chosen for our second type of device because the diffusion of Cu ions can be beneficial for the formation the conductive filament (CF). Finally, a ~5 nm SiO2 barrier layer was employed between TE and RS layers to confine the diffusion of Cu into the RS layer. At the same time, this SiO2 inserting layer can provide an additional interfacial series resistance in the device to lower the off current, consequently, improve the on/off ratio and whole performance. In conclusion, the transparent IGZO-based RRAMs were established. To tune the property of RS layer, the thickness layer and sputtering conditions of RS were adjusted. In order to engineer the diffusion capability of the TE material to the RS layer and the BE, a set of TE materials and a barrier layer were integrated in IGZO-based RRAM and the performance was compared. Our encouraging results clearly demonstrate that IGZO is a promising material in RRAM applications and overcoming the bottleneck of current memory technologies. 
    more » « less
  5. ; ; (, Carbon)
    Liu, Chang (Ed.)
    The synthesis of carbon nanotubes (CNTs) requires well-defined catalyst nanoparticles that can influence both diameter and chirality. Herein, catalyst nanoparticles containing both the catalyst and catalyst support material were developed. Bimetallic aluminum oxide–iron oxide (AlOx–Fe2O3) nanorice was synthesized from a mixture containing both aluminum and iron oleate precursors in the solution phase. The nanoparticles were assembled as a monolayer film on a silicon oxide (SiO2) substrate via organic linker molecules to synthesize vertically aligned carbon nanotubes (VA-CNTs). Microscopic and spectroscopic characterization of the premade catalyst nanoparticles and monolayer film assembly revealed the quality of the nanoscale assembly, which facilitated the successful growth of VA-CNTs. The length of the CNTs synthesized using these AlOx–Fe2O3 nanorice catalyst nanoparticles surpassed that of previously reported CNTs grown on bare SiO2 surfaces without oxide buffer layers. In addition, the CNTs appeared to be directly bonded/connected to the SiO2 substrate, suggesting CNT formation via the tip-growth mechanism. The effects of growth temperature and catalyst reduction time were evaluated to obtain high-yield VA-CNTs. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email