skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Monitoring Volumetric Defects in 3D Bioprinting Using Video-Based Vibrometry
Abstract Additive manufacturing technologies have the potential to revolutionize the manufacturing industry by making it easier to fabricate complex structures, high value, and low volume parts in various contexts. Bio-additive manufacturing is particularly promising, as it has enabled the 3D printing of human organs. Researchers have made progress by developing novel materials and printing strategies for additively manufacturing complicated mission-critical geometries. On the other hand, assessing the structural integrity of these bio-printed structures has been challenging, as destructive contact-based approaches may interfere with the manufacturing process and affect the original dynamics and quality of the bio-prints, due to the relatively soft and lightweight nature of bio-prints. Furthermore, the repeatability of measurement is significantly dependent on the quality of how the sensor is attached to the part. Non-contact methods, such as laser and X-ray based techniques, can provide measurements without adding mass to the part. However, lasers may produce inaccuracies due to reflection and absorption in translucent materials, which are often found in bio-constructs. Although there have been significant advances in non-contact methods for reliably identifying damages in bio-printed structures, particularly embedded defects, implementing these approaches in a straightforward way has been challenging. To advance the state-of-the-art, this study proposes a novel method that can reliably assess the damage properties without contact by using video-based vibrometry. Vibration signals can provide a comprehensive response of the target structure, including material properties and geometry changes due to embedded defects in bioprinting. By analyzing the phase shift of the pixel intensity in the video, the vibration characteristics that indicate surface and/or embedded defects can be assessed for the entire structure captured in the camera angle, without the need for multiple sensors to be installed on the structure. This research focuses on analyzing the vibration characteristics of a cube that was manufactured by an extrusion-based bio-printer with pneumatic dispensing using sodium alginate based bioink. A high-speed camera and phase-based motion estimation technique are used to obtain experimental data on the vibration characteristics of the cube. Volumetric defects introduced by extrusion pressure irregularity and scaffolds with voids and their severities are identified by monitoring the vibration characteristics. These findings suggest that the proposed method could be utilized to effectively verify the structural integrity of additively manufactured organs during fabrication, which could enhance process optimization and operation safety. Future works include incorporating finite element model to compare its response characteristics for healthy and damaged models with the experimentally obtained results and identifying the detection sensitivity and limit with respect to parameters such as damage type and location.  more » « less
Award ID(s):
2301948
PAR ID:
10526071
Author(s) / Creator(s):
;
Publisher / Repository:
American Society of Mechanical Engineers
Date Published:
ISBN:
978-0-7918-8752-3
Format(s):
Medium: X
Location:
Austin, Texas, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; (, American Society of Mechanical Engineers)
    The emergence of bio-additive manufacturing marks a crucial advancement in the field of biomedical engineering. For successful biomedical applications including bioprinted organ transplants, ensuring the quality of printed structures poses a significant challenge. Among the major challenges encountered in ensuring the structural integrity of bioprinting, nozzle clogging stands out as one of the frequent concerns in the process. It disrupts the uniform distribution of extrusion pressure, leading to the formation of defective structures. This study focused on detecting defects arising from the irregularities in extrusion pressure. To address this concern, a video-based motion estimation technique, which emerged as a novel non-contact and non-destructive technique for assessing bio 3D printed structures, is employed in this research. While other advancements, including contact-based and laser-based approaches, may offer limited performance due to the soft, lightweight, and translucent nature of bioconstructs. In this study, defective and non-defective ear models are additively manufactured by an extrusion-based bioprinter with pneumatic dispensing. Extrusion pressure was strategically controlled to introduce defective bioprints similar to those caused by nozzle malfunctions. The vibration characteristics of the ear structures are captured by a high-speed camera and analyzed using phase-based motion estimation approaches. In addition to ambient excitations from the printing process, acoustic excitations from a subwoofer are employed to assess its impact on print quality. The increase in extrusion pressure, simulating clogged nozzle issues, resulted in significant changes in the vibration characteristics, including shifts in the resonance frequencies. By monitoring these modal property changes, defective bioconstructs could be reliably determined. These findings suggest that the proposed approach could effectively verify the structural integrity of additively manufactured bioconstructs. Implementing this method along with the real time defect detection technique will significantly enhance the structural integrity of additively manufactured bioconstructs and ultimately improve the production of healthy artificial organs, potentially saving countless lives. 
    more » « less
  2. ; ; (, Proceedings for IISE Annual Conference & Expo 2022)
    Ellis, K; Ferrell, W; Knapp, J. (Ed.)
    Three-dimensional bio-printing is a rapidly growing field attempting to recreate functional tissues for medical and pharmaceutical purposes. Development of functional tissues and organs requires the ability to achieve large full-scale scaffolds that mimic human organs. It is difficult to achieve large scaffolds that can support themselves without damaging printed cells in the process. The high viscosity needed to support large prints requires high amounts of pressure that diminishes cell viability and proliferation. By working with the rheological, mechanical, and microstructural properties of different compositions, a set of biomaterial compositions was identified to have high structural integrity and shape fidelity without needing a harmful amount of pressure to extrude. Various large scale-scaffolds were fabricated (up to 3.0 cm, 74 layers) using those hybrid hydrogels ensuring geometric fidelity. This effort can ensure to fabricate large scaffolds using 3D bio-printing processes ensuring proper internal and external geometries. 
    more » « less
  3. ; ; ; ; (, American Society of Mechanical Engineers)
    Abstract Thermoset materials have begun to be applied in additive composite manufacturing due to their ability to withstand high temperatures without losing structural integrity. Meanwhile, the characterization of mechanical properties for additively manufactured composites is critical for ensuring material reliability and safety. However, traditional testing methods struggle to accurately and nondestructively characterize additively manufactured composites due to challenges posed by curing processes, microstructural variability, anisotropic properties of thermoset composites, and the risk of damaging these materials during evaluation. For characterizing the mechanical properties of additive-manufactured thermoset composites, this paper presents a novel method that combines a nondestructive PZT-LDV guided wave sensing system and a wavenumber analysis that fuses multidimensional Fourier transform with dispersion curve regression. For proof of concept, we performed an experiment using our method to measure a 3D-printed thermoset composite panel. Based on our nondestructive approach, two material properties (shear wave velocity and Poisson’s ratio) in multiple directions were successfully determined for the tested panel. We expect this research to introduce a non-contact and efficient method for characterizing various composites and monitoring their property changes after additive manufacturing. 
    more » « less
  4. ; ; (, Journal of polymer science)
    3D printing of thermoplastics through local melting and deposition via Material Extrusion Additive Manufacturing provides a simple route to the near net-shape manufacture of complex objects. However, the mechanical properties resulting from these 3D printed structures tend to be inferior when compared to traditionally manufactured thermoplastics. These unfavorable characteristics are generally attributed to the structure of the interface between printed roads. Here, we illustrate how the molecular mass distribution for a model thermoplastic, poly(methyl methacrylate) (PMMA), can be tuned to enhance the Young’s modulus of 3D printed plastics. Engineering the molecular mass distribution alters the entanglement density, which controls the strength of the PMMA in the solid state and the chain diffusion in the melt. Increasing the low molecular mass tail increases Young’s modulus and ultimate tensile strength of the printed parts. These changes in mechanical properties are comparable to more complex routes previously reported involving new chemistry or nanoparticles. Controlling the molecular mass distribution provides a simple route to improve the performance in 3D printing of thermoplastics that can be as effective as more complex approaches. 
    more » « less
  5. ; ; ; (, Scientific Data)
    Abstract Additive manufacturing (AM) is now widely used for research and industrial production. The benchmark data for mechanical properties of additively manufactured specimens is very useful for many communities. This data article presents a tensile testing dataset of ASTM D638 size specimens without and with embedded internal geometrical features printed using polylactic acid (PLA) in a Fused Filament Fabrication (FFF) additive manufacturing process. The added features can mimic defects of various shapes and sizes. This work is a supplement to the published research articleAssisted defect detection by in-process monitoring of additive manufacturing using optical imaging and infrared thermography(Additive Manufacturing, 2023, 103483). The printed specimens were tensile tested. Stress-strain graphs were developed and used to calculate the mechanical properties such as ultimate tensile strength (UTS) and strain at UTS. The mechanical properties, the correlations between mechanical properties and size, shape and location of geometrical features (defects), and the trends in mechanical properties can be useful in benchmarking the results of other researchers. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email