An official website of the United States government
Abstract Levees play a critical role in safeguarding communities and assets from flooding, acting as essential defenses against the devastating impacts of inundation. Yet, earthen levees are prone to breaches, especially in the face of swift floodwaters. Distributed low-cost sensor networks offer the potential to generate spatial maps illustrating soil moisture levels. Long-term monitoring of these spatial maps could identify vulnerable zones in the levee while providing an understanding of how climate change affects levee stability. This study presents an investigation into spatial monitoring of soil saturation in levees using a wireless network of UAV-deployable sensing spike packages. The goal of this paper is to demonstrate the use of these sensors for assessing soil conductivity levels in sand-filled embankments. The obtained soil conductivity levels are crucial for determining soil saturation. The developed sensing spikes consist of a spike that penetrates the ground and measures conductivity between two electrically conductive contacts. The sensing spike consists of microprocessors for edge computing, and wireless data communication systems that report data to a way station in real-time. To validate the efficacy of the developed sensors, a flume test is developed as a replica of a levee and monitored under controlled water flow conditions. The analysis of data at different times revealed the progression of moisture throughout the earthen embankment. Initially, the soil is almost dry. As the controlled water flow proceeds, the soil becomes partially saturated, with the final stage showing a dominant presence of saturated soil. The collected data sampled at the measurement points is expanded to a continuous moisture profile using kriging. Gaussian kriging, also known as ordinary kriging, is one of the commonly used variants of the kriging method. In Gaussian kriging, the estimation of values at unsampled locations is based on a linear combination of nearby data points, with weights determined by their spatial relationships. The Gaussian assumption implies that the errors in the estimation process follow a normal distribution. The extended knowledge about saturation levels obtained through kriging can lead to insights for predicting vulnerable areas and preempting potential failures. Overall, this study paves the way for further development of a wireless network of sensing spike packages as a UAV-deployable system for levee health assessment and improved infrastructure management.
more »
« less
Classifying Soil Saturation Levels Using a Network of UAV-Deployed Smart Penetrometers
Abstract Levees are built to safeguard human lives, essential infrastructure, and farmland. However, failure of levees can have catastrophic impacts due to a fast rate of inundation in areas protected by levees. Earthen levees are prone to failure due to excessive moisture content that reduces the shear strength of the soil. The use of levee monitoring systems has demonstrated the ability to reduce the likelihood of failure by creating maps that depict the saturation levels of the surface of the levee, both in terms of space and time. By utilizing extensive sensor networks to continuously monitor these geo-infrastructure systems, the structural deterioration attributed to changing climate can be studied. Measuring environmental parameters surrounding such structures provides insight into the potential stressors that cause structural failure. Steps can then be taken to mitigate those effects on the levees and maintain structural integrity. However, the massive scale of levees makes it difficult to monitor with conventional wired sensors. This paper presents a preliminary investigation into the development and validation of UAV-deployable smart sensing spikes for soil conductivity levels in levees, which is a measurement modality for determining soil saturation levels. For this work, Gaussian process regression (also known as kriging) is used to model the soil saturation levels between sensing spikes obtaining a continuous moisture map of the levees. The expanded data is then categorized using a clustering-based machine learning approach with conductivity data from sensing spikes as model inputs. The machine learning model output is sorted into three categories: dry, partially saturated, and saturated soil. The findings of a laboratory study are presented, and the implications of the raw and expanded data are discussed. This work will aid in predicting potential levee failure risks and maintenance requirements based on the analysis of the soil conditions using a network of smart sensing spikes.
more »
« less
- Award ID(s):
- 2152896
- PAR ID:
- 10526123
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- ISBN:
- 978-0-7918-8752-3
- Format(s):
- Medium: X
- Location:
- Austin, Texas, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
There are growing concerns regarding the increase in flood risk due to climate change and land use/land cover changes. In light of these changes, levees play an increasingly critical role in safeguarding communities, infrastructure, and the natural environment. However, the average age of levees in the United States is 60 years, with the majority operating under marginal conditions. The most common failure mode of earthen levees is breach due to overtopping. Existing methodologies evaluate the site-specific probability of levee overtopping and do not provide a holistic view of flood risk across a wider area. Here we present a regional-scale overtopping model for levees using a data-driven overtopping model that uses five variables: (1) levee construction classification, (2) overtopping depth, (3) overtopping duration, (4) erosion resistance classification, and (5) duration of levee loading before overtopping. The overtopping model is applied to levee systems in Wilton, California. The probability of breach due to overtopping is presented for three distinct scenarios (overtopping duration) during a 50-year flood event. The results show the probability of breach for the Wilton Levee ranges from 0.32 to 0.91 for overtopping durations of 6 hours and between 6 to 24 hours. For durations exceeding 24 hours, the probability of breach increases to a range of 0.73 to 0.98. The proposed framework offers a viable tool for performing regional-scale levee risk assessment, offering broader implications for enhancing preparedness, response, and recovery strategies in the face of escalating flood risks.more » « less
-
Water resource has become one of the most precious resources in recent decades. Agriculture accounts for about 80\% of the total water usage in US. There is a demanding need for efficient irrigation and water management systems built for sustainable water utilization in smart agriculture. Real time in-situ soil moisture sensing is a vital part for smart agriculture. Traditional electromagnetic (EM) based soil moisture sensing relies on EM based wireless sensor or ground penetrating radar (GPR) system. Based on the receiving signal strength and delay, tomographic techniques are used to derive the dielectric parameters of the soil, which are then into soil moisture distribution using empirical model. However, the EM signal attenuate sharply during underground propagation because of high operating frequency and lossy medium. In order to counter the disadvantage for underground sensing, we propose a Magnetic Induction (MI) based large range soil moisture sensing scheme in inhomogeneous environments. Here, we present the topology of the sensing system and analyze the channel model. The sensing process is based on transformed model, the conductivity and permittivity distribution are derived using SIRT algorithm. Through COMSOL simulation and analytical results, our proposed soil moisture sensing method achieves a root mean square error (RMSE) of 0.06 m^3/m^3 in 40 m 2D scale inhomogeneous environment range.more » « less
-
Abstract Here we use Richards Equation models of variably saturated soil and bedrock groundwater flow to investigate first‐order patterns of the coupling between soil and bedrock flow systems. We utilize a Monte Carlo sensitivity analysis to identify important hillslope parameters controlling bedrock recharge and then model the transient response of bedrock and soil flow to seasonal precipitation. Our results suggest that hillslopes can be divided into three conceptual zones of groundwater interaction, (a) the zone of lateral unsaturated soil moisture accumulation (upper portion of hillslope), (b) the zone of soil saturation and bedrock recharge (middle of hillslope) and (c) the zone of saturated‐soil lateral flow and bedrock groundwater exfiltration (bottom of hillslope). Zones of groundwater interaction expand upslope during periods of precipitation and drain downslope during dry periods. The amount of water partitioned to the bedrock groundwater system a can be predicted by the ratio of bedrock to soil saturated hydraulic conductivity across a variety of hillslope configurations. Our modelled processes are qualitatively consistent with observations of shallow subsurface saturation and groundwater fluctuation on hillslopes studied in our two experimental watersheds and support a conceptual model of tightly coupled shallow and deep subsurface circulation where groundwater recharge and discharge continuously stores and releases water from longer residence time storage.more » « less
-
Abstract The size and spatial distribution of soil structural macropores impact the infiltration, percolation, and retention of soil water. Despite the assumption often made in hydrologic flux equations that these macropores are rigid, highly structured soils can respond quickly to moisture variability‐induced shrink‐swell processes altering the size distribution of these pores. In this study, we use a high‐resolution (180 m) laser imaging technique to measure the average width of interpedal, planar macropores from intact cross sections and relate it to matrix water content. We also develop an expression for unsaturated hydraulic conductivity that accounts for dynamic macropore geometries and propose a method for partitioning sensor soil water content data into matrix and macropore water contents. The model was applied to a soil in northeastern Kansas where soil monoliths had been imaged to quantify macropore properties and continuous water content data were collected at three depths. Model‐predicted macropore width showed significant sensitivity to matrix water content resulting in changes of 15%–50% of maximum width over the 15‐month period of record. Transient saturated hydraulic conductivity predicted from the model compared favorably to a previously developed model accounting for moisture‐induced changes to structural unit porosity. Following periods of low soil moisture, infiltrating meteoric water filled highly conductive macropores increasing by several orders of magnitude which subsequently decreased as water was absorbed into the matrix and macropores drained. This model offers a means by which to combine measurable morphological data with soil moisture sensors to monitor dynamic hydraulic properties of soils susceptible to shrink‐swell processes.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Conference Paper:
- https://doi.org/10.1115/smasis2023-111009
