skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Numerical Analysis and Wave Tank Test of a Point Absorber Wave Energy Converter Using a Tether Driven Power Take-Off System
Title: Numerical Analysis and Wave Tank Test of a Point Absorber Wave Energy Converter Using a Tether Driven Power Take-Off System
Abstract Technologies to enhance the survivability of wave energy converters (WECs) in harsh ocean environment and reduce the difficulty and cost of deployment and operation are important. Traditional two-body point absorber with a rigid Power Take-off (PTO) may result in two essential problems on the deployment and operation. This study proposes a novel a two-body self-reactive point absorber with a flexible tether drive PTO. This flexible PTO design can avoid the request of supporting structures on the WEC to constrain the motion and harvest energy from multiple degree of freedoms (DOFs) motion without requirement of a taut mooring. System dynamics considering 4-DOF with the proposed flexible PTO system are formulated. A scaled prototype is designed, fabricated, and tested in a wave tank. Results show that the proposed flexible PTO can greatly increase the power absorption and add a reactive peak in the frequency domain. This study reveals that the proposed PTO is desirable for the two-body point absorber and thus holding the advantages of fast and easy deployment with slack mooring and good survivability under large wave conditions.  more » « less
Award ID(s):
2246608
PAR ID:
10527562
Author(s) / Creator(s):
; ; ; ; ; ;
Publisher / Repository:
American Society of Mechanical Engineers
Date Published:
ISBN:
978-0-7918-8740-0
Format(s):
Medium: X
Location:
Boston, Massachusetts, USA
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; (, ASME 2022 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference)
    Abstract Agriculture provides a large amount of the world’s fish supply. Remote ocean farms need electric power, but most of them are not covered by the electric power grid. Ocean wave energy has the potential to provide power and enable fully autonomous farms. However, the lack of solid mounting structure makes it very challenging to harvest ocean power efficiently; the small-scale application makes high-efficiency conversion hard to achieve. To address these issues, we proposed a self-reactive ocean wave converter (WEC) and winch-based Power Take-Off (PTO) to enable a decent capture width ratio (CWR) and high power conversion efficiency. Two flaps are installed on a fish feed buoy and can move along linear guides. Ocean wave in both heave and surge directions drive the flaps to move and hence both wave potential energy and wave kinetic energy are harvested. The motion is transmitted by a winch to rotation motion to drive an electric generator, and power is harvested. Dynamic modeling is done by considering the harvester structure, the added mass, the damping, and the excitation force from ocean wave. The proposed WEC is simulated in ANSYS AQWA with excitations from regular wave and results in a gross CWR of 13%. A 1:3.5 scaled-down PTO is designed and prototyped. Bench-top experiment with Instron is done and the results show that the mechanical efficiency can reach up to 83% and has potential for real applications. 
    more » « less
  2. ; (, Journal of Marine Science and Engineering)
    Wave Energy Converters (WECs) are designed to be deployed in arrays, usually in a limited space, to minimize the cost of installation, mooring, and maintenance. Control methods that attempt to maximize the harvested power often lead to power flow from the WEC to the ocean, at times, to maximize the overall harvested power from the ocean over a longer period. The Power Take-Off (PTO) units that can provide power to the ocean (reactive power) are usually more expensive and complex. In this work, an optimal control formulation is presented using Pontryagin’s minimum principle that aims to maximize the harvested energy subject to constraints on the maximum PTO force and power flow direction. An analytical formulation is presented for the optimal control of an array of WECs, assuming irregular wave input. Three variations of the developed control are tested: a formulation without power constraints, a formulation that only allows for positive power, and finally, a formulation that allows for finite reactive power. The control is compared with optimally tuned damping and bang–bang control. 
    more » « less
  3. ; (, 2022 ASME IDETC conference (American Society of Mechanical Engineers, International Design Engineering Technical Conferences))
    A nonlinear inerter pendulum vibration absorber is integrated with an electromagnetic power take-off system (called IPVA-PTO) and is analyzed for its efficacy in ocean wave energy conversion of a spar platform. The IPVA-PTO system shows a nonlinear energy transfer phenomenon between the spar and the IPVA-PTO which can be used to convert the vibration energy of the spar into electricity while reducing the hydrodynamic response of the spar. The hydrodynamic coefficients of the spar are computed using a commercial boundary-element-method (BEM) code. It is shown that the energy transfer is associated with 1:2 internal resonance of the pendulum vibration absorber, which is induced by a period-doubling bifurcation. The period-doubling bifurcation is studied using the harmonic balance method. A modified alternating frequency/time (AFT) approach is developed to compute the Jacobian matrix involving nonlinear inertial effects of the IPVA-PTO system. It is shown that the period doubling bifurcation leads to 1:2 internal resonance and plays a major role in the energy transfer between the spar and the pendulum. The response amplitude operator (RAO) in heave and the capture width of the IPVA-PTO-integrated spar are compared with its linear counterpart and it is shown that the IPVA-PTO system outperforms the linear energy harvester as the former has a lower RAO and higher capture width. 
    more » « less
  4. ; (, Proceedings of the European Wave and Tidal Energy Conference)
    null (Ed.)
    —Ocean wave energy is a renewable energy which remains costly for large-scale electricity generation. Although the oscillating water column (OWC) wave energy converter (WEC) is a promising device type with a rectifying air turbine and generator which convert alternating airflow induced by the water motion into kinetic energy then to electric energy, there are still several challenges to overcome to achieve commercial energy production. A first step is deploying multiple devices close to each other in WEC parks, to save cost associated with mooring lines and power transmission cables and a second step is applying control at each stage of energy conversion to increase the electric energy output of the devices and ensure a safe operation. Herein, we first present a state-space model of a park of seven hydrodynamically interacting floating OWC WECs in all degrees of freedom with nonlinear PTO dynamics and a shared, quasi-static mooring model. The electric power flow is modeled by considering the conversion losses from the AC generators over a DC link, including a storage unit to the grid connection. Secondly, the OWC WEC park is expressed from a higher hierarchical level as an automaton driven by discrete events. Finally, we use a standard supervisory control approach to enable different local control schemes to ensure a save operation of the individual WEC and the park. The supervisor has good adaptability potential for different WECs and the incorporation of safety mechanisms. 
    more » « less
  5. ; (, American Society of Mechanical Engineers)
    Abstract The inerter pendulum vibration absorber is connected with a power take-off mechanism (called IPVA-PTO) to study its wave energy conversion potential. The resulting IPVA-PTO system is integrated between a spar and a floater (torus) using a ballscrew mechanism. The hydrodynamic stiffness, added mass and radiation damping effects on the spar-floater system are characterized using boundary element method via Ansys Aqwa. It has been observed that a 1:2 internal resonance between the spar-floater system and the pendulum is responsible for nonlinear energy transfer between the two systems. This nonlinear energy transfer occurs when the primary harmonic solution of the system becomes unstable, and a secondary solution emerges in the system characterized by harmonics of frequency half the excitation frequency. As a result of this energy transfer, the vibration of the spar-floater system is suppressed, and the energy is transferred to the pendulum. The focus of this paper is to analyze this 1:2 internal resonance phenomenon near the resonant frequency of the spar. The IPVA-PTO system, when integrated with the spar-floater system, is compared to a linear coupling between the spar and the floater in terms of the response amplitude operator (RAO) of the spar and the energy conversion capability defined by the capture width of the energy converter. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email