An official website of the United States government
The unstretched laminar flame speed (LFS) plays a key role in engine models and predictions of flame propagation. It is also an essential parameter in the study of turbulent combustion and can be directly used in many turbulent combustion models. Therefore, it is important to predict the laminar flame speed accurately and efficiently. Two improved correlations for the unstretched laminar flame speed, namely improved power law and improved Arrhenius form correlations, are proposed for iso-octane/air mixtures in this study, using simulated results for typical operating conditions for spark-ignition engines: unburned temperatures of 300-950 K, pressures of 1-120 bar, and equivalence ratios of 0.6-1.5. The original data points used to develop the new correlations were obtained using the detailed combustion kinetics for iso-octane from Lawrence Livermore National Laboratory (LLNL). The three coefficients in the improved power law correlation were determined using a methodology different from previous approaches. The improved Arrhenius form correlation employs a function of unburned gas temperature to replace the flame temperature, making the expression briefer and making the coefficients easier to calculate. The improved Arrhenius method is able to predict the trends and the values of laminar flame speed with improved accuracy over a larger range of operating conditions. The improved power law method also works well but for a relatively narrow range of predictions. The improved Arrhenius method is recommended, considering its overall fitting error was only half of that using the improved power law correlation and it was closer to the experimental measurements. Even though ϕm, the equivalence ratio at which the laminar flame speed reaches its maximum, is not monotonic with pressure, this dependence is still included, since it produces least-rich best torque (LBT). The comparisons between the improved correlations in this study and the experimental measurements and the other correlations from various researchers are shown as well.
more »
« less
This content will become publicly available on July 1, 2025
Laminar flame speed regime at elevated temperature and pressure
Elevated temperature and pressure laminar flame speed measurements of propane and n-heptane fuel blends were conducted using a Rapid Compression Machine-Flame (RCM-Flame) apparatus. Herein, the lack of experimental flame speed data at simultaneously high temperatures and pressures akin to practical combustion conditions is addressed. The RCM-Flame apparatus is validated against a larger constant volume combustion chamber (CVCC) and simulations using a propane-nitrogen-oxygen mixture at ambient temperature and different pressures, demonstrating high fidelity. Further experiments with an n-heptane-nitrogen-helium-oxygen mixture reveal agreement between experimental and simulated flame speeds at semi-elevated, post-compression conditions. Trials with a propane-helium-oxygen mixture over varied temperatures and pressures demonstrate measured flame speeds falling between two kinetic mechanism simulations, maintaining the general trend. A power-law model correlating laminar flame speeds with elevated temperatures and pressures is developed for propane-helium-oxygen flames at a unity equivalence ratio. Overall, the kinetic mechanisms are shown to be able to predict flame speeds at elevated temperatures and pressures providing validation at conditions not yet explored in literature, optimistically advancing combustion research for practical applications.
more »
« less
- Award ID(s):
- 2324471
- PAR ID:
- 10527609
- Publisher / Repository:
- Fuel
- Date Published:
- Journal Name:
- Fuel
- Volume:
- 368
- Issue:
- C
- ISSN:
- 0016-2361
- Page Range / eLocation ID:
- 131672
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Laminar flame speeds at high pressure are difficult to experimentally observe. Typically, high-pressure flame diagnostic is accomplished through observation of a spherically expanding flame in a constant volume chamber. However, flame instabilities at large radius and ignition effects at small radius limit measurable pressure range for Laminar flame speeds. Advanced combustion devices which operate at high pressures to improve capabilities and efficiencies require high quality laminar flame speed to aid in simulations and development. To expand the measurable range of flame data for high pressure flame measurement, this study proposes the further investigation of the ignition source and the incorporation of ignition diagnostics into the traditional flame speed analysis. To achieve this goal in future research, experimental spark propagation is observed and described in detail with the goal of improved experimental control and understanding. Parameters such as pressure, composition, electrode geometry and surface quality are discussed and the implication it has on the observed schlieren kernel propagation. Careful preparation of the ignition source can lead to improved surface and shape for future flame measurements. It is also shown that the thermal energy dissipated into the gas during discharge can be captured experimentally through measurement of the spark voltage, current and plasma sheath voltage drop. With the experimentally captured thermal energy, a simple energy balance can be used to describe the size of the observed ignition kernel for radius larger than 0.3 mm (following breakdown). The measurement of the thermal energy is described utilizing two experimental methods to find the discharge voltage of the nonequilibrium region at the boundary of the electrodes.more » « less
-
Abstract Experimentally measured values of the laminar flame speed (SL) are reported for the primary reference fuels over a range of unburned-gas temperatures (Tu) spanning from room temperature to above 1,000 K, providing the highest-temperature SL measurements ever reported for gasoline-relevant fuels. Measurements were performed using expanding flames ignited within a shock tube and recorded using side-wall schlieren imaging. The recently introduced area-averaged linear curvature (AA-LC) model is used to extrapolate stretch-free flame speeds from the aspherical flames. High-temperature SL measurements are compared to values simulated using different kinetic mechanisms and are used to assess three functional forms of empirical SL–Tu relationships: the ubiquitous power-law model, an exponential relation, and a non-Arrhenius form. This work demonstrates the significantly enhanced capability of the shock-tube flame speed method to provide engine-relevant SL measurements with the potential to meaningfully improve accuracy and reduce uncertainty of kinetic mechanisms when used to predict global combustion behaviors most relevant to practical engine applications.more » « less
-
Previous generations of halocarbon refrigerants and flame suppressants cause intolerable levels of ozone depletion and global warming, motivating the search for environmentally-friendly alternatives, but the complex flammability of proposed halocarbon compounds has proven to be a challenge. Because the combustion chemistry of these greener halocarbon refrigerants and suppressants is very condition-dependent, the flammability of potential alternatives need to be screened under a variety of operational conditions prior to marketing and further product development. To facilitate this screening, kinetic models can be generated automatically in Reaction Mechanism Generator (RMG) to predict the flammability. RMG, a software package that automates the generation of detailed reaction mechanisms, has recently been extended to predict the chemical kinetics involved in halocarbon combustion. Full kinetic mechanisms with kinetic, thermodynamic, and transport properties generated from RMG are then evaluated with Cantera to predict laminar flame speeds under different reacting conditions. Recent work developed an RMG model of flame suppressant 2-BTP (CH2=CBrCF3) in methane flames. Current work has advanced RMG’s 2-BTP model to achieve improved quantitative agreement with experimental flame speeds. We also use RMG to generate models of binary halocarbon blends to determine the importance of “cross reactions” that are not accounted for through simple concatenation of individual combustion mechanisms. Flame speeds of RMG-generated blend models and blend models comprised of concatenated mechanisms are compared, along with experimental flame speeds found in literature. As demonstrated in current and previous work, automating the generation of full halocarbon kinetic models through RMG expedites screening for the next generation of environmentally-friendly refrigerants and suppressants, a task that would be both time- and cost-intensive if conducted without automation.more » « less
-
Previous generations of halocarbon refrigerants and flame suppressants cause intolerable levels of ozone depletion and global warming, motivating the search for environmentally-friendly alternatives, but the complex flammability of proposed halocarbon compounds has proven to be a challenge. Because the combustion chemistry of these greener halocarbon refrigerants and suppressants is very condition-dependent, the flammability of potential alternatives need to be screened under a variety of operational conditions prior to marketing and further product development. To facilitate this screening, kinetic models can be generated automatically in Reaction Mechanism Generator (RMG) to predict the flammability. RMG, a software package that automates the generation of detailed reaction mechanisms, has recently been extended to predict the chemical kinetics involved in halocarbon combustion. Full kinetic mechanisms with kinetic, thermodynamic, and transport properties generated from RMG are then evaluated with Cantera to predict laminar flame speeds under different reacting conditions. Recent work developed an RMG model of flame suppressant 2-BTP (CH2=CBrCF3) in methane flames. Current work has advanced RMG’s 2-BTP model to achieve improved quantitative agreement with experimental flame speeds. We also use RMG to generate models of binary halocarbon blends to determine the importance of “cross reactions” that are not accounted for through simple concatenation of individual combustion mechanisms. Flame speeds of RMG-generated blend models and blend models comprised of concatenated mechanisms are compared, along with experimental flame speeds found in literature. As demonstrated in current and previous work, automating the generation of full halocarbon kinetic models through RMG expedites screening for the next generation of environmentally-friendly refrigerants and suppressants, a task that would be both time- and cost-intensive if conducted without automation.more » « less
